(01) — Cost guide · Illinois edition

Siding Installation Cost in Illinois (2026)

In Illinois, siding installation cost for the typical project costs about $11,950 — 4% above the national average of $11,500. The gap comes from labor: Illinois labor runs at 1.08× the national average, and labor is about 50% of an installed price, so the state figure below scales the labor share only and leaves material prices at national levels. Read the national guide for the full breakdown, then use this page for the Illinois numbers, city prices and code notes.

$6,750
low end in Illinois — simple spec
$11,950
typical in Illinois — most homeowners pay near this
$23,400
high end in Illinois — premium materials, complex site
$7.80
per sq ft of wall installed, typical vinyl siding, Illinois-adjusted

Typical project used for these figures: residing a 2,000 sq ft two-story home (about 1,500 sq ft of wall area) in vinyl siding, including house wrap, trim, and removal and disposal of the old siding. Ranges are 2026 planning figures for a professional installation in Illinois, derived from the national guide as explained below — always confirm with local quotes.

Illinois prices vs the national average

Materials for this project are priced nationally — a bundle of shingles or a pallet of panels costs roughly the same anywhere in the country before delivery. Labor is what moves, and Illinois labor sits at 1.08× the national average. Applying that index to the labor share (about 50% of the installed price) gives the Illinois range below. If your quotes cluster well outside it, the difference is usually specification — material grade, code extras or site difficulty — not the labor market, and it is worth asking which line moved.

FigureNational averageIllinoisDifference
Low end$6,500$6,7504% above
Typical project$11,500$11,9504% above
High end$22,500$23,4004% above

For the full national breakdown — what is included, what is billed separately, DIY vs pro, and what drives the price — read the national siding installation cost guide. The table below re-prices that same breakdown for Illinois.

Cost breakdown, Illinois-adjusted

The national guide's line items, with materials held at national prices and labor scaled by the Illinois index of 1.08. Compare a real bid against this table line by line: if a contractor's labor lines run far above these figures, ask what is different about the job, and if the materials lines run far above, ask for the product grades.

Line itemMaterialsLabor (Illinois)Total
Vinyl siding material — 1,500 sq ft plus wasteStandard vinyl siding panels, starter strip, J-channel and corner posts, with a 10 percent waste allowance for cuts $4,200 $0 $4,200
House wrap and flashingHouse wrap over the sheathing, taped seams, and flashing tape at windows, doors and penetrations $450 $400 $850
Removal and disposal of old sidingStrip the old siding, haul it away, and dispose of it under local rules, including lead-paint handling where required $50 $1,300 $1,350
Installation labor — hang, level and fastenHang the courses level with the correct expansion gap, nail into studs, and cut and fit around windows, doors and fixtures $0 $4,150 $4,150
Trim, soffit and fasciaCorner boards, window and door trim, soffit panels and fascia boards, matched to the new siding $650 $600 $1,250
Delivery and permitsMaterial delivery and the building permit where the jurisdiction requires one $200 $0 $200
Total for the typical projectState-adjusted from the national breakdown above $5,550 $6,450 $12,000

Typical cost by city in Illinois

Labor markets differ within a state too. These city figures apply each city's multiplier to the Illinois typical price for the same project — use them to sanity-check a quote from a specific metro, not as a bid. Rural areas outside these metros often land below the cheapest city shown, while resort and island markets can exceed the highest.

CityTypical project cost
Springfield$10,750
Peoria$10,750
Rockford$11,000
Aurora$12,200
Naperville$12,700
Chicago$13,150

Illinois rules, climate and code that change the price

Illinois has no statewide residential building code — municipalities adopt their own, and Chicago runs its own comprehensive building code, which is why Chicago-area prices run well above downstate. Frost depth is 36–42 in across northern Illinois, and freeze-thaw cycles punish shallow footings and poorly drained bases. Chicago and its suburbs add strict permit, inspection and contractor-registration requirements; many smaller towns are lighter-touch but still require permits for structural work.

Siding Installation Cost in Illinois: what to watch

How much does siding installation cost in Illinois? A typical 2,000 sq ft two-story home (about 1,500 sq ft of wall) in vinyl siding runs about $11,950 — just above the national typical of $11,500, with most Illinois jobs landing between $6,750 and $23,400. Chicago runs about $13,150, while Springfield runs about $10,750. Illinois siding is a frost and code job: frost depth is 36–42 in across northern Illinois, so the wall and sheathing work underneath the siding must be sound before the new courses go on, and Chicago runs its own comprehensive building code with strict permit, inspection and contractor-registration requirements that downstate towns do not impose. Vinyl gets brittle in a hard Chicago winter, so fiber cement earns its premium here more than in mild climates — it holds paint 10 to 15 years and resists the freeze-thaw cycle that cracks cheap vinyl. Get the house wrap, flashing and trim specification in writing, because a Chicago quote that omits them is not comparable to one that includes them.

What to ask contractors in Illinois

Four questions that catch the expensive surprises on this project in this state. Get the answers in writing, on the quote, before you compare prices — two quotes are only comparable when they describe the same job.

  • Permit: Illinois leaves code adoption to municipalities, so permit rules vary: Chicago and its suburbs are strict and thorough, while smaller towns may be lighter but still require permits for decks, roofing and structural work. Always check the municipality, not the state, for the rule that applies to your address.
  • Specification: Ask for the full material specification — grades, ratings and the code extras in the state notes above — not just a brand name and a total.
  • Labor basis: Ask how the quote treats the Illinois labor market: a quote far above the $11,950 typical figure should name the extra work, access problem or specification that justifies it.
  • Local references: Ask for two recent jobs in your city, not just your state — city prices above vary by thousands, and a contractor working regularly in your metro knows its permit office and inspectors.

Frequently asked questions — Illinois

How to read these numbers. Last updated October 2026 · Illinois figures are derived from the national guide by scaling the labor share (about 50% of the installed price) by the Illinois labor index of 1.08; materials are held at national prices. State indices are planning-grade figures compiled from published regional cost data, not contractor quotes. Always confirm with local quotes; your quote will vary.