(01) — Cost guide · Illinois edition
Patio Cost in Illinois (2026)
In Illinois, patio cost for the typical project costs about $5,600 — 4% above the national average of $5,400. The gap comes from labor: Illinois labor runs at 1.08× the national average, and labor is about 45% of an installed price, so the state figure below scales the labor share only and leaves material prices at national levels. Read the national guide for the full breakdown, then use this page for the Illinois numbers, city prices and code notes.
- $2,700
- low end in Illinois — simple spec
- $5,600
- typical in Illinois — most homeowners pay near this
- $11,600
- high end in Illinois — premium materials, complex site
- $17.61
- per sq ft installed, typical concrete-paver patio, Illinois-adjusted
Typical project used for these figures: a 16 × 20 ft (320 sq ft) concrete-paver patio on a compacted gravel base, new build on level ground. Ranges are 2026 planning figures for a professional installation in Illinois, derived from the national guide as explained below — always confirm with local quotes.
Illinois prices vs the national average
Materials for this project are priced nationally — a bundle of shingles or a pallet of panels costs roughly the same anywhere in the country before delivery. Labor is what moves, and Illinois labor sits at 1.08× the national average. Applying that index to the labor share (about 45% of the installed price) gives the Illinois range below. If your quotes cluster well outside it, the difference is usually specification — material grade, code extras or site difficulty — not the labor market, and it is worth asking which line moved.
| Figure | National average | Illinois | Difference |
|---|---|---|---|
| Low end | $2,600 | $2,700 | 4% above |
| Typical project | $5,400 | $5,600 | 4% above |
| High end | $11,200 | $11,600 | 4% above |
For the full national breakdown — what is included, what is billed separately, DIY vs pro, and what drives the price — read the national patio cost guide. The table below re-prices that same breakdown for Illinois.
Cost breakdown, Illinois-adjusted
The national guide's line items, with materials held at national prices and labor scaled by the Illinois index of 1.08. Compare a real bid against this table line by line: if a contractor's labor lines run far above these figures, ask what is different about the job, and if the materials lines run far above, ask for the product grades.
| Line item | Materials | Labor (Illinois) | Total |
|---|---|---|---|
| Excavation & gradingDigging 7–9 in deep, grading for drainage fall away from the house, hauling spoil | $50 | $500 | $550 |
| Gravel base & beddingAbout 4–6 in of compacted crushed stone plus a 1 in screeded bedding-sand layer | $650 | $450 | $1,100 |
| Pavers320 sq ft of standard concrete pavers including the waste allowance for cuts | $1,750 | $0 | $1,750 |
| Laying & jointing laborSetting the field and border, cutting edges, compacting and sweeping joints | $0 | $1,250 | $1,250 |
| Edge restraints & cutsSpiked edge restraint on all open sides; diamond-blade cuts at borders and obstacles | $250 | $250 | $500 |
| Joint sand, sealer & cleanupPolymeric joint sand, optional sealer coat, wash-down and site cleanup | $200 | $200 | $400 |
| Delivery & permitsMaterial delivery and permit where the jurisdiction requires one | $50 | $0 | $50 |
| Total for the typical projectState-adjusted from the national breakdown above | $2,950 | $2,600 | $5,600 |
Typical cost by city in Illinois
Labor markets differ within a state too. These city figures apply each city's multiplier to the Illinois typical price for the same project — use them to sanity-check a quote from a specific metro, not as a bid. Rural areas outside these metros often land below the cheapest city shown, while resort and island markets can exceed the highest.
| City | Typical project cost |
|---|---|
| Springfield | $5,050 |
| Peoria | $5,050 |
| Rockford | $5,150 |
| Aurora | $5,700 |
| Naperville | $5,950 |
| Chicago | $6,150 |
Illinois rules, climate and code that change the price
Illinois has no statewide residential building code — municipalities adopt their own, and Chicago runs its own comprehensive building code, which is why Chicago-area prices run well above downstate. Frost depth is 36–42 in across northern Illinois, and freeze-thaw cycles punish shallow footings and poorly drained bases. Chicago and its suburbs add strict permit, inspection and contractor-registration requirements; many smaller towns are lighter-touch but still require permits for structural work.
Patio Cost in Illinois: what to watch
Illinois patio building is a freeze-thaw job with a Chicago premium. A typical 16 × 20 ft paver patio runs about $5,600 — just above the national typical of $5,400 — with Chicago about $6,150 and Springfield about $5,050. Frost depth of 36–42 in across northern Illinois means the compacted gravel base is the line that decides whether the patio stays flat, and the clay soils around Chicago heave when the base is thin. Chicago runs its own building code with filing and inspection steps that suburban and downstate jobs do not face, and a patio with a retaining edge or drainage work can trigger a permit there. De-icing salt damages concrete pavers, so use sand or a calcium-based de-icer, and specify polymeric joint sand to stop freeze-thaw pumping.
What to ask contractors in Illinois
Four questions that catch the expensive surprises on this project in this state. Get the answers in writing, on the quote, before you compare prices — two quotes are only comparable when they describe the same job.
- Permit: Illinois leaves code adoption to municipalities, so permit rules vary: Chicago and its suburbs are strict and thorough, while smaller towns may be lighter but still require permits for decks, roofing and structural work. Always check the municipality, not the state, for the rule that applies to your address.
- Specification: Ask for the full material specification — grades, ratings and the code extras in the state notes above — not just a brand name and a total.
- Labor basis: Ask how the quote treats the Illinois labor market: a quote far above the $5,600 typical figure should name the extra work, access problem or specification that justifies it.
- Local references: Ask for two recent jobs in your city, not just your state — city prices above vary by thousands, and a contractor working regularly in your metro knows its permit office and inspectors.
Frequently asked questions — Illinois
Illinois leaves code adoption to municipalities, so permit rules vary: Chicago and its suburbs are strict and thorough, while smaller towns may be lighter but still require permits for decks, roofing and structural work. Always check the municipality, not the state, for the rule that applies to your address.
Illinois labor averages about 8% above national, driven by Chicago at roughly 10% above the state figure; downstate cities run about 10% below it. Deep frost footings and Chicago-code detailing are the local cost drivers national averages miss.
Budget around $5,600 for the typical project (a 16 × 20 ft (320 sq ft) concrete-paver patio on a compacted gravel base, new build on level ground) in Illinois, with most jobs landing between $2,700 and $11,600. That typical figure is 4% above the national typical of $5,400, because Illinois labor runs at 1.08× the national average and labor is about 45% of the installed price. Get at least three local quotes before committing — the range above is a planning figure, not a bid.
Yes. Within Illinois, the typical project runs from about $5,050 in Springfield to about $6,150 in Chicago, reflecting local labor markets and, where applicable, stricter local code requirements. The city figures above are planning estimates from the state average, not quotes — a specific job's price depends on its specification, access and site conditions.