(01) — Cost guide · Texas edition

Landscaping Cost in Texas (2026)

In Texas, landscaping cost for the typical project costs about $6,300 — 3% below the national average of $6,500. The gap comes from labor: Texas labor runs at 0.94× the national average, and labor is about 45% of an installed price, so the state figure below scales the labor share only and leaves material prices at national levels. Read the national guide for the full breakdown, then use this page for the Texas numbers, city prices and code notes.

$3,100
low end in Texas — simple spec
$6,300
typical in Texas — most homeowners pay near this
$13,150
high end in Texas — premium materials, complex site
$2.53
per sq ft of landscaped area, typical front-yard package, Texas-adjusted

Typical project used for these figures: a front-yard landscaping package for a typical suburban home — about 2,500 sq ft of new sod, 300 sq ft of planting beds with shrubs and perennials, 3 small trees, mulch and edging. Ranges are 2026 planning figures for a professional installation in Texas, derived from the national guide as explained below — always confirm with local quotes.

Texas prices vs the national average

Materials for this project are priced nationally — a bundle of shingles or a pallet of panels costs roughly the same anywhere in the country before delivery. Labor is what moves, and Texas labor sits at 0.94× the national average. Applying that index to the labor share (about 45% of the installed price) gives the Texas range below. If your quotes cluster well outside it, the difference is usually specification — material grade, code extras or site difficulty — not the labor market, and it is worth asking which line moved.

FigureNational averageTexasDifference
Low end$3,200$3,1003% below
Typical project$6,500$6,3003% below
High end$13,500$13,1503% below

For the full national breakdown — what is included, what is billed separately, DIY vs pro, and what drives the price — read the national landscaping cost guide. The table below re-prices that same breakdown for Texas.

Cost breakdown, Texas-adjusted

The national guide's line items, with materials held at national prices and labor scaled by the Texas index of 0.94. Compare a real bid against this table line by line: if a contractor's labor lines run far above these figures, ask what is different about the job, and if the materials lines run far above, ask for the product grades.

Line itemMaterialsLabor (Texas)Total
Design & site prepA simple planting plan, clearing the old lawn and beds, grading for drainage fall away from the house $150 $550 $700
Sod (2,500 sq ft)Pallet sod delivered and laid, including rolling and the first watering-in $1,250 $700 $1,950
Planting beds & shrubsAbout 300 sq ft of beds with shrubs and perennials, soil amendment and planting $1,100 $600 $1,700
Trees (3 small)Three 5–7 ft nursery trees, staked and mulched, species suited to the site $450 $300 $750
Mulch & edgingAbout 3 cu yd of hardwood mulch at 3 in depth plus metal or stone edging around the beds $350 $250 $600
Hardscape allowanceStepping stones and a border course where the design calls for them $300 $200 $500
Delivery, cleanup & warrantyMaterial delivery, site cleanup and the installer's first-season plant warranty $100 $50 $150
Total for the typical projectState-adjusted from the national breakdown above $3,700 $2,650 $6,350

Typical cost by city in Texas

Labor markets differ within a state too. These city figures apply each city's multiplier to the Texas typical price for the same project — use them to sanity-check a quote from a specific metro, not as a bid. Rural areas outside these metros often land below the cheapest city shown, while resort and island markets can exceed the highest.

CityTypical project cost
El Paso$5,700
San Antonio$6,050
Fort Worth$6,200
Houston$6,300
Dallas$6,450
Austin$6,850

Texas rules, climate and code that change the price

Texas has no statewide general-contractor license, so permit rules and inspection quality vary by city — Houston, Dallas and Austin all run their own permitting portals with different thresholds, and unincorporated areas may require no building permit at all. Frost depth is shallow across most of the state (often 6–12 in), which keeps footing work cheap, but expansive clay soils around Dallas–Fort Worth and Houston move with moisture and demand deeper, belled piers for decks and fences. Gulf Coast wind and hail exposure raises roofing and fence specifications, and hail-resistant shingles are a common insurance-driven upgrade.

Landscaping Cost in Texas: what to watch

How much does landscaping cost in Texas? About $6,300 for a typical front-yard package — 2,500 sq ft of sod, 300 sq ft of beds and 3 small trees — just below the national typical of $6,500, with most Texas jobs landing between $3,100 and $13,150. Austin runs about $6,800, while El Paso runs about $5,650. Texas landscaping is a heat and water story: summer heat and watering restrictions argue for native and drought-tolerant planting, and expansive clay around Dallas–Fort Worth and Houston moves with moisture, so grading and soil amendment matter more than the plant list. Bermuda and Zoysia handle the heat; fescue does not survive a Texas summer. Get the plant list by species and size, the soil amendment and the grading fall in writing, because a Texas quote that omits them is not comparable to one that includes them.

What to ask contractors in Texas

Four questions that catch the expensive surprises on this project in this state. Get the answers in writing, on the quote, before you compare prices — two quotes are only comparable when they describe the same job.

  • Permit: Most Texas cities require a permit for a roof replacement, a deck over 30 in high or attached to the house, and any structural work, but thresholds differ by city and unincorporated land often has none. Check the city permitting portal before work starts — an unpermitted deck or roof can stall a future sale even where enforcement is light.
  • Specification: Ask for the full material specification — grades, ratings and the code extras in the state notes above — not just a brand name and a total.
  • Labor basis: Ask how the quote treats the Texas labor market: a quote far above the $6,300 typical figure should name the extra work, access problem or specification that justifies it.
  • Local references: Ask for two recent jobs in your city, not just your state — city prices above vary by thousands, and a contractor working regularly in your metro knows its permit office and inspectors.

Frequently asked questions — Texas

How to read these numbers. Last updated October 2026 · Texas figures are derived from the national guide by scaling the labor share (about 45% of the installed price) by the Texas labor index of 0.94; materials are held at national prices. State indices are planning-grade figures compiled from published regional cost data, not contractor quotes. Always confirm with local quotes; your quote will vary.