(01) — Cost guide · North Carolina edition

Landscaping Cost in North Carolina (2026)

In North Carolina, landscaping cost for the typical project costs about $6,300 — 3% below the national average of $6,500. The gap comes from labor: North Carolina labor runs at 0.94× the national average, and labor is about 45% of an installed price, so the state figure below scales the labor share only and leaves material prices at national levels. Read the national guide for the full breakdown, then use this page for the North Carolina numbers, city prices and code notes.

$3,100
low end in North Carolina — simple spec
$6,300
typical in North Carolina — most homeowners pay near this
$13,150
high end in North Carolina — premium materials, complex site
$2.53
per sq ft of landscaped area, typical front-yard package, North Carolina-adjusted

Typical project used for these figures: a front-yard landscaping package for a typical suburban home — about 2,500 sq ft of new sod, 300 sq ft of planting beds with shrubs and perennials, 3 small trees, mulch and edging. Ranges are 2026 planning figures for a professional installation in North Carolina, derived from the national guide as explained below — always confirm with local quotes.

North Carolina prices vs the national average

Materials for this project are priced nationally — a bundle of shingles or a pallet of panels costs roughly the same anywhere in the country before delivery. Labor is what moves, and North Carolina labor sits at 0.94× the national average. Applying that index to the labor share (about 45% of the installed price) gives the North Carolina range below. If your quotes cluster well outside it, the difference is usually specification — material grade, code extras or site difficulty — not the labor market, and it is worth asking which line moved.

FigureNational averageNorth CarolinaDifference
Low end$3,200$3,1003% below
Typical project$6,500$6,3003% below
High end$13,500$13,1503% below

For the full national breakdown — what is included, what is billed separately, DIY vs pro, and what drives the price — read the national landscaping cost guide. The table below re-prices that same breakdown for North Carolina.

Cost breakdown, North Carolina-adjusted

The national guide's line items, with materials held at national prices and labor scaled by the North Carolina index of 0.94. Compare a real bid against this table line by line: if a contractor's labor lines run far above these figures, ask what is different about the job, and if the materials lines run far above, ask for the product grades.

Line itemMaterialsLabor (North Carolina)Total
Design & site prepA simple planting plan, clearing the old lawn and beds, grading for drainage fall away from the house $150 $550 $700
Sod (2,500 sq ft)Pallet sod delivered and laid, including rolling and the first watering-in $1,250 $700 $1,950
Planting beds & shrubsAbout 300 sq ft of beds with shrubs and perennials, soil amendment and planting $1,100 $600 $1,700
Trees (3 small)Three 5–7 ft nursery trees, staked and mulched, species suited to the site $450 $300 $750
Mulch & edgingAbout 3 cu yd of hardwood mulch at 3 in depth plus metal or stone edging around the beds $350 $250 $600
Hardscape allowanceStepping stones and a border course where the design calls for them $300 $200 $500
Delivery, cleanup & warrantyMaterial delivery, site cleanup and the installer's first-season plant warranty $100 $50 $150
Total for the typical projectState-adjusted from the national breakdown above $3,700 $2,650 $6,350

Typical cost by city in North Carolina

Labor markets differ within a state too. These city figures apply each city's multiplier to the North Carolina typical price for the same project — use them to sanity-check a quote from a specific metro, not as a bid. Rural areas outside these metros often land below the cheapest city shown, while resort and island markets can exceed the highest.

CityTypical project cost
Greensboro$6,050
Winston-Salem$6,050
Durham$6,300
Wilmington$6,300
Charlotte$6,450
Raleigh$6,600

North Carolina rules, climate and code that change the price

North Carolina's code is statewide (the NC Residential Code) with local enforcement, and its geography splits costs: the mountains need deeper frost footings and snow consideration, the Piedmont is moderate, and the coast carries hurricane wind requirements. Frost depth is about 12–18 in in the Piedmont and deeper in the mountains. The Research Triangle and Charlotte are the state's higher-cost metros, while coastal wind detailing adds cost in the east even though labor there is average.

Landscaping Cost in North Carolina: what to watch

How much does landscaping cost in North Carolina? About $6,300 for a typical front-yard package — just below the national typical of $6,500, with most North Carolina jobs landing between $3,100 and $13,150. Raleigh runs about $6,550, while Greensboro runs about $6,050. North Carolina landscaping spans three climates: coastal wind and salt in the east, moderate Piedmont conditions around Charlotte and Raleigh, and deeper frost in the mountains. The state sits in the turf transition zone, so the right grass depends on where you are — fescue in the mountains and Piedmont, Bermuda and Zoysia on the coast — and a single statewide plant list is the warning sign. The NC Residential Code applies statewide with local enforcement. Match the species to your region.

What to ask contractors in North Carolina

Four questions that catch the expensive surprises on this project in this state. Get the answers in writing, on the quote, before you compare prices — two quotes are only comparable when they describe the same job.

  • Permit: North Carolina requires permits for roofing, decks and structural work in every county under the state residential code. Coastal counties add wind-borne debris and uplift requirements that the permit review checks on roofing and deck connections.
  • Specification: Ask for the full material specification — grades, ratings and the code extras in the state notes above — not just a brand name and a total.
  • Labor basis: Ask how the quote treats the North Carolina labor market: a quote far above the $6,300 typical figure should name the extra work, access problem or specification that justifies it.
  • Local references: Ask for two recent jobs in your city, not just your state — city prices above vary by thousands, and a contractor working regularly in your metro knows its permit office and inspectors.

Frequently asked questions — North Carolina

How to read these numbers. Last updated October 2026 · North Carolina figures are derived from the national guide by scaling the labor share (about 45% of the installed price) by the North Carolina labor index of 0.94; materials are held at national prices. State indices are planning-grade figures compiled from published regional cost data, not contractor quotes. Always confirm with local quotes; your quote will vary.