(01) — Cost guide · New York edition

Landscaping Cost in New York (2026)

In New York, landscaping cost for the typical project costs about $7,200 — 11% above the national average of $6,500. The gap comes from labor: New York labor runs at 1.24× the national average, and labor is about 45% of an installed price, so the state figure below scales the labor share only and leaves material prices at national levels. Read the national guide for the full breakdown, then use this page for the New York numbers, city prices and code notes.

$3,550
low end in New York — simple spec
$7,200
typical in New York — most homeowners pay near this
$14,950
high end in New York — premium materials, complex site
$2.88
per sq ft of landscaped area, typical front-yard package, New York-adjusted

Typical project used for these figures: a front-yard landscaping package for a typical suburban home — about 2,500 sq ft of new sod, 300 sq ft of planting beds with shrubs and perennials, 3 small trees, mulch and edging. Ranges are 2026 planning figures for a professional installation in New York, derived from the national guide as explained below — always confirm with local quotes.

New York prices vs the national average

Materials for this project are priced nationally — a bundle of shingles or a pallet of panels costs roughly the same anywhere in the country before delivery. Labor is what moves, and New York labor sits at 1.24× the national average. Applying that index to the labor share (about 45% of the installed price) gives the New York range below. If your quotes cluster well outside it, the difference is usually specification — material grade, code extras or site difficulty — not the labor market, and it is worth asking which line moved.

FigureNational averageNew YorkDifference
Low end$3,200$3,55011% above
Typical project$6,500$7,20011% above
High end$13,500$14,95011% above

For the full national breakdown — what is included, what is billed separately, DIY vs pro, and what drives the price — read the national landscaping cost guide. The table below re-prices that same breakdown for New York.

Cost breakdown, New York-adjusted

The national guide's line items, with materials held at national prices and labor scaled by the New York index of 1.24. Compare a real bid against this table line by line: if a contractor's labor lines run far above these figures, ask what is different about the job, and if the materials lines run far above, ask for the product grades.

Line itemMaterialsLabor (New York)Total
Design & site prepA simple planting plan, clearing the old lawn and beds, grading for drainage fall away from the house $150 $750 $900
Sod (2,500 sq ft)Pallet sod delivered and laid, including rolling and the first watering-in $1,250 $950 $2,200
Planting beds & shrubsAbout 300 sq ft of beds with shrubs and perennials, soil amendment and planting $1,100 $800 $1,900
Trees (3 small)Three 5–7 ft nursery trees, staked and mulched, species suited to the site $450 $350 $800
Mulch & edgingAbout 3 cu yd of hardwood mulch at 3 in depth plus metal or stone edging around the beds $350 $300 $650
Hardscape allowanceStepping stones and a border course where the design calls for them $300 $250 $550
Delivery, cleanup & warrantyMaterial delivery, site cleanup and the installer's first-season plant warranty $100 $50 $150
Total for the typical projectState-adjusted from the national breakdown above $3,700 $3,450 $7,150

Typical cost by city in New York

Labor markets differ within a state too. These city figures apply each city's multiplier to the New York typical price for the same project — use them to sanity-check a quote from a specific metro, not as a bid. Rural areas outside these metros often land below the cheapest city shown, while resort and island markets can exceed the highest.

CityTypical project cost
Buffalo$6,350
Rochester$6,350
Syracuse$6,350
Albany$6,750
Yonkers$7,800
New York City$8,500

New York rules, climate and code that change the price

New York is two markets: New York City, where labor, access and permit costs are among the highest in the country, and upstate, where prices run closer to the national average. Frost depth reaches 48 in or more upstate, so deck and fence footings must go deep, and snow loads drive roof and deck structure. New York City has its own construction codes and Department of Buildings permitting, while the rest of the state follows the state residential code with local amendments.

Landscaping Cost in New York: what to watch

How much does landscaping cost in New York? About $7,200 for a typical front-yard package — above the national typical of $6,500, with most New York jobs landing between $3,550 and $14,950. New York City runs about $8,500, while Buffalo runs about $6,350. New York landscaping is two markets: the city brings access, labor and Department of Buildings permitting costs that upstate jobs never see, while upstate work is dominated by a short growing season, 42–48 in frost depth and snow loads that punish the wrong species. Cool-season grasses and hardy perennials are the upstate default; the city favors container and rooftop-adjacent planting. Plant in spring or fall — a midsummer install in either market struggles.

What to ask contractors in New York

Four questions that catch the expensive surprises on this project in this state. Get the answers in writing, on the quote, before you compare prices — two quotes are only comparable when they describe the same job.

  • Permit: Permits are required statewide for roofing, decks and structural work, but New York City runs its own Department of Buildings process with stricter filing, inspection and licensed-contractor rules than upstate jurisdictions. Upstate, county and town offices handle permits under the state residential code.
  • Specification: Ask for the full material specification — grades, ratings and the code extras in the state notes above — not just a brand name and a total.
  • Labor basis: Ask how the quote treats the New York labor market: a quote far above the $7,200 typical figure should name the extra work, access problem or specification that justifies it.
  • Local references: Ask for two recent jobs in your city, not just your state — city prices above vary by thousands, and a contractor working regularly in your metro knows its permit office and inspectors.

Frequently asked questions — New York

How to read these numbers. Last updated October 2026 · New York figures are derived from the national guide by scaling the labor share (about 45% of the installed price) by the New York labor index of 1.24; materials are held at national prices. State indices are planning-grade figures compiled from published regional cost data, not contractor quotes. Always confirm with local quotes; your quote will vary.