(01) — Cost guide · Illinois edition

Countertop Installation Cost in Illinois (2026)

In Illinois, countertop installation cost for the typical project costs about $2,800 — 3% above the national average of $2,700. The gap comes from labor: Illinois labor runs at 1.08× the national average, and labor is about 40% of an installed price, so the state figure below scales the labor share only and leaves material prices at national levels. Read the national guide for the full breakdown, then use this page for the Illinois numbers, city prices and code notes.

$2,050
low end in Illinois — simple spec
$2,800
typical in Illinois — most homeowners pay near this
$4,650
high end in Illinois — premium materials, complex site
$92.88
per sq ft installed for standard quartz, including fabrication and one sink cutout, Illinois-adjusted

Typical project used for these figures: a 30 sq ft kitchen countertop in quartz, standard 25 in deep run with one sink cutout. Ranges are 2026 planning figures for a professional installation in Illinois, derived from the national guide as explained below — always confirm with local quotes.

Illinois prices vs the national average

Materials for this project are priced nationally — a bundle of shingles or a pallet of panels costs roughly the same anywhere in the country before delivery. Labor is what moves, and Illinois labor sits at 1.08× the national average. Applying that index to the labor share (about 40% of the installed price) gives the Illinois range below. If your quotes cluster well outside it, the difference is usually specification — material grade, code extras or site difficulty — not the labor market, and it is worth asking which line moved.

FigureNational averageIllinoisDifference
Low end$2,000$2,0503% above
Typical project$2,700$2,8003% above
High end$4,500$4,6503% above

For the full national breakdown — what is included, what is billed separately, DIY vs pro, and what drives the price — read the national countertop installation cost guide. The table below re-prices that same breakdown for Illinois.

Cost breakdown, Illinois-adjusted

The national guide's line items, with materials held at national prices and labor scaled by the Illinois index of 1.08. Compare a real bid against this table line by line: if a contractor's labor lines run far above these figures, ask what is different about the job, and if the materials lines run far above, ask for the product grades.

Line itemMaterialsLabor (Illinois)Total
Quartz slabs, 33 sq ft with wasteQuartz at about $36 per sq ft, including a 10% cutting and breakage allowance $1,200 $0 $1,200
Fabrication — edge profile, sink cutout, polishingCNC cutting, eased edge profile, undermount sink cutout and polished finish $100 $550 $650
Installation and settingDelivery, dry-fit, levelling on the cabinets, seaming and sealing the joints $50 $450 $500
Templating and measurementDigital or physical template taken after the cabinets are set and level $0 $150 $150
Removal and disposal of old countertopLift and haul away the old top and backsplash, and clean the cabinet tops $0 $300 $300
Total for the typical projectState-adjusted from the national breakdown above $1,350 $1,450 $2,800

Typical cost by city in Illinois

Labor markets differ within a state too. These city figures apply each city's multiplier to the Illinois typical price for the same project — use them to sanity-check a quote from a specific metro, not as a bid. Rural areas outside these metros often land below the cheapest city shown, while resort and island markets can exceed the highest.

CityTypical project cost
Springfield$2,500
Peoria$2,500
Rockford$2,550
Aurora$2,850
Naperville$2,950
Chicago$3,050

Illinois rules, climate and code that change the price

Illinois has no statewide residential building code — municipalities adopt their own, and Chicago runs its own comprehensive building code, which is why Chicago-area prices run well above downstate. Frost depth is 36–42 in across northern Illinois, and freeze-thaw cycles punish shallow footings and poorly drained bases. Chicago and its suburbs add strict permit, inspection and contractor-registration requirements; many smaller towns are lighter-touch but still require permits for structural work.

Countertop Installation Cost in Illinois: what to watch

Illinois countertops are a Chicago-code and access job: Chicago runs its own comprehensive building code with strict permit, inspection and contractor-registration requirements, and condo work in the city adds board approvals, restricted hours and elevator bookings for heavy slabs. City kitchens are small, so a run may still pay for most of a slab — ask the fabricator about remnants, which can cut the material cost by a third. Frost depth of 36–42 in across northern Illinois does not touch countertops directly, but it shapes the housing stock: older homes with out-of-level cabinets need shimming before templating. Quartz dominates Illinois kitchens because it needs no sealing in a climate with four real seasons. A Chicago quote must separate the board, access and fabrication costs from the slab itself, or it cannot be compared to anything.

What to ask contractors in Illinois

Four questions that catch the expensive surprises on this project in this state. Get the answers in writing, on the quote, before you compare prices — two quotes are only comparable when they describe the same job.

  • Permit: Illinois leaves code adoption to municipalities, so permit rules vary: Chicago and its suburbs are strict and thorough, while smaller towns may be lighter but still require permits for decks, roofing and structural work. Always check the municipality, not the state, for the rule that applies to your address.
  • Specification: Ask for the full material specification — grades, ratings and the code extras in the state notes above — not just a brand name and a total.
  • Labor basis: Ask how the quote treats the Illinois labor market: a quote far above the $2,800 typical figure should name the extra work, access problem or specification that justifies it.
  • Local references: Ask for two recent jobs in your city, not just your state — city prices above vary by thousands, and a contractor working regularly in your metro knows its permit office and inspectors.

Frequently asked questions — Illinois

How to read these numbers. Last updated October 2026 · Illinois figures are derived from the national guide by scaling the labor share (about 40% of the installed price) by the Illinois labor index of 1.08; materials are held at national prices. State indices are planning-grade figures compiled from published regional cost data, not contractor quotes. Always confirm with local quotes; your quote will vary.