Article — How-To · November 18, 2026 · 15 min read

How to Pressure Wash Your House: Equipment, Technique and the Mistakes That Damage Siding

Pressure washing a house costs $200 to $600 when you hire a professional, or $50 to $100 a day to rent a machine and do it yourself, and the job takes 2 to 4 hours for a typical 1,500 sq ft home.

Pressure washing a house costs $200 to $600 when you hire a professional, or $50 to $100 a day to rent a machine and do it yourself, and the job takes 2 to 4 hours for a typical 1,500 sq ft home. The right pressure is the number that matters: vinyl siding needs 1,300 to 1,600 PSI, wood siding needs 1,000 to 1,500 PSI, and brick needs 1,500 to 2,500 PSI, and a nozzle held too close or a pressure set too high will strip paint, dent vinyl, and force water behind the siding. Wash from the bottom up, rinse from the top down, and never aim the spray up under the siding laps. Plan the painting that often follows a wash with the exterior painting cost guide, prep the surface after washing with the exterior painting prep guide, and check the siding itself with the siding buying guide.

Worker pressure washing the vinyl siding of a house with a long wand, with dirty water running off the clean siding below

How much does it cost to pressure wash a house?

Pressure washing a house costs $200 to $600 when you hire a professional, or $50 to $100 a day to rent a machine and do it yourself, and the price follows the size of the house and the condition of the siding. A professional charges $0.15 to $0.35 per sq ft of house surface, so a 1,000 sq ft ranch costs $200 to $350, a 1,500 sq ft two-story home costs $300 to $450, and a 2,500 sq ft home costs $400 to $600. A house with heavy mildew, algae, or chalking costs $50 to $150 more, because it needs a detergent treatment and a longer dwell time. A do-it-yourself job costs $50 to $100 to rent a gas pressure washer for a day, $30 to $60 for detergent and a nozzle set, and $20 to $40 for a ladder or an extension wand, for a total of $100 to $200. Buying a pressure washer costs $200 to $600 for an electric model and $300 to $900 for a gas model, and a homeowner who washes the house every year or two will save money by owning one after the second or third use.

The professional price includes the detergent, the equipment, and the insurance, and a professional knows the pressure and the nozzle for each siding type, which is the part that damages houses when it is wrong. A do-it-yourself job saves $100 to $400, but it takes 2 to 4 hours, and the rental clock is running, so plan the job before you pick up the machine. Rent the washer on a weekday if you can, because weekend rates are often $20 to $30 higher, and pick it up the evening before so you can start at first light. A soft wash, which uses low pressure and a detergent solution, costs $300 to $700 from a professional and is the right choice for a roof, for old wood siding, and for a house with loose paint, because it cleans without the risk of high pressure. A house should be pressure washed every 1 to 2 years in a humid climate, where algae and mildew grow fast, and every 2 to 3 years in a dry climate. Wash before you paint, because paint does not stick to a dirty, chalky surface, and check the full painting cost in the exterior painting cost guide before you schedule the job.

What pressure washer do I need for a house?

A pressure washer for a house needs 2,000 to 3,000 PSI and 2.0 to 3.0 gallons per minute (GPM), and a gas model is the better choice for a full house, because it delivers more flow and more pressure than an electric model. An electric pressure washer delivers 1,300 to 2,000 PSI and 1.2 to 1.8 GPM, which is enough for a small ranch, a deck, and a driveway, but it cleans a full house slowly, because the low flow rate means you make more passes. A gas pressure washer delivers 2,000 to 3,500 PSI and 2.0 to 3.5 GPM, which cleans a 1,500 sq ft house in 2 to 4 hours, and it has no cord to drag around the yard. The GPM matters more than the PSI for cleaning speed: a 2,000 PSI machine at 3.0 GPM cleans faster than a 3,000 PSI machine at 2.0 GPM, because the flow carries the dirt away. Rent a gas machine at 2,500 to 3,000 PSI and 2.5 to 3.0 GPM for a typical house, and turn the pressure down at the machine or use a wider nozzle for delicate siding.

The nozzle is the part that sets the pressure on the wall, and the nozzles are color-coded: a red 0-degree nozzle shoots a pencil-thin jet that cuts paint and wood, a yellow 15-degree nozzle is for concrete and brick, a green 25-degree nozzle is the all-purpose nozzle for siding, and a white 40-degree nozzle is the gentlest nozzle for vinyl and painted wood. Use the green 25-degree nozzle for most siding and the white 40-degree nozzle for vinyl and for any surface you are unsure about, and never use the red 0-degree nozzle on a house, because it will cut a line through siding and paint in a second. A surface cleaner attachment, which is a spinning bar inside a round cover, costs $50 to $100 to rent and cleans a driveway or a patio 3 times faster than a nozzle, but it is not for siding. An extension wand costs $30 to $60 to rent and lets you reach the second floor from the ground, which is safer than a ladder. A detergent injector, which is built into most rental machines, mixes the soap into the water stream, and a downstream injector is better than an upstream injector, because it does not run soap through the pump. Wear safety glasses, closed shoes, and gloves, because a pressure washer jet can cut skin at 2,000 PSI.

How do you pressure wash a house step by step?

Pressure washing a house takes 2 to 4 hours for a 1,500 sq ft home, and the steps are: protect, apply detergent, wash from the bottom up, and rinse from the top down. Start by closing all the windows and doors, covering the exterior outlets and light fixtures with plastic and tape, and moving patio furniture, grills, and potted plants at least 10 ft (3.0 m) from the walls. Cover shrubs and flower beds with a tarp, because the detergent can burn leaves, and wet the plants with a garden hose before and after the wash to dilute any soap that reaches them. Mix the detergent according to the label, usually 1 part house-wash detergent to 10 parts water, and apply it with the low-pressure soap nozzle or the detergent injector, starting at the bottom of the wall and working up, so the soap does not run down over dry siding and leave streaks. Let the detergent sit for 5 to 10 minutes, but do not let it dry on the wall, because dried soap leaves a film that is hard to rinse off.

Wash with the green 25-degree nozzle or the white 40-degree nozzle, holding the wand 12 to 18 in (30 to 46 cm) from the wall and moving it in smooth, overlapping strokes, starting at the bottom of the wall and working up in sections of 4 to 6 ft wide. Keep the nozzle moving at all times, never hold it in one spot, and keep the spray angled slightly downward, never up under the siding laps, because water forced behind the siding rots the sheathing and grows mold. Work one wall at a time, and rinse each section from the top down as soon as you finish washing it, so the dirt runs down and off the wall instead of drying on it. Rinse with clean water at the same pressure, and check each section from 10 ft back before you move on, because streaks and missed spots are easy to see from a distance and hard to see up close. Wash the soffits and the fascia last, with the white 40-degree nozzle and a light touch, because they are thin and easy to dent. Let the house dry for 24 to 48 hours before you paint it, and follow the prep steps in the exterior painting prep guide if painting is the next step.

Close-up of a pressure washer nozzle spraying water onto house siding, showing the clean stripe left behind the wand
Pressure washing a house costs $200 to $600 when you hire a professional, or $50 to $100 a day to rent a machine, and the job takes 2 to 4 hours for a typical 1,500 sq ft home.

What pressure is safe for each type of siding?

Vinyl siding is safe at 1,300 to 1,600 PSI with a white 40-degree nozzle held 12 to 18 in from the wall, and a higher pressure or a closer nozzle will dent the vinyl, crack it, or force water behind it. Wood siding is safe at 1,000 to 1,500 PSI with a white 40-degree nozzle, and a higher pressure will gouge the wood, raise the grain, and strip the paint. Fiber cement siding, such as HardiePlank, is safe at 1,500 to 2,000 PSI with a green 25-degree nozzle, because it is harder than wood and vinyl, but it still needs a downward angle, because water forced behind fiber cement rots the sheathing. Brick is safe at 1,500 to 2,500 PSI with a yellow 15-degree or green 25-degree nozzle, because brick is hard, but old brick with soft mortar needs 1,000 to 1,500 PSI and a wide nozzle, because high pressure blasts the mortar out of the joints. Stucco is safe at 1,200 to 1,500 PSI with a white 40-degree nozzle, and it needs a soft wash if it is cracked or chalking, because high pressure drives water into the cracks and behind the stucco.

Aluminum siding is safe at 1,200 to 1,500 PSI with a white 40-degree nozzle, and it dents easily, so keep the nozzle at least 18 in from the wall and never use a narrow nozzle on it. Painted wood siding that is peeling or chalking should be soft washed at under 1,000 PSI with a detergent solution, because high pressure strips the loose paint and leaves a patchy surface that needs scraping before repainting. A roof should never be pressure washed, because the high pressure strips the granules off asphalt shingles and shortens the roof life by years, and a roof should be soft washed at under 100 PSI with a detergent solution instead. Check the siding type before you start, and if you are not sure what it is, test a small, hidden spot at the lowest pressure and work up slowly. The siding buying guide covers each material and its maintenance, and it is worth a read before you wash a siding type you have not worked on before. When in doubt, use less pressure and more detergent: the soap does the cleaning, and the water carries the dirt away, so a gentle wash with a good detergent cleans as well as a hard wash and damages nothing.

What are the most common pressure washing mistakes?

The most common pressure washing mistake is using too much pressure, because a 3,000 PSI jet held 6 in from vinyl siding will dent it, cut through paint, and force water behind the laps in a second. The second mistake is aiming the spray upward, because water forced up under the siding laps gets behind the siding, soaks the sheathing, and grows mold that you cannot see until the wall rots. Always aim the spray slightly downward, and never spray up at the siding from below. The third mistake is washing from the top down, because the dirty water runs down over the clean siding below and leaves streaks that are hard to remove. Wash from the bottom up and rinse from the top down. The fourth mistake is holding the nozzle in one spot, because a stationary jet cuts a clean stripe through dirt and paint, and the stripe shows from the street. Keep the nozzle moving in smooth, overlapping strokes, and overlap each pass by 50 percent.

The fifth mistake is letting the detergent dry on the wall, because dried soap leaves a white film that is hard to rinse off and can stain the siding. Apply detergent to one wall at a time, let it sit for 5 to 10 minutes, and rinse before it dries. The sixth mistake is washing in direct sun on a hot day, because the detergent dries in 2 minutes and the water evaporates before it rinses, so wash on a cloudy day or in the morning and evening. The seventh mistake is not protecting plants, outlets, and light fixtures, because the detergent burns leaves and the water shorts out an outlet. Cover them with plastic and wet the plants before and after. The eighth mistake is using a ladder with a pressure washer, because the kickback from the jet can throw you off balance, and a fall from a ladder with a running pressure washer is a serious injury. Use an extension wand to reach the second floor from the ground, and hire a professional for a third floor or a steep roofline. The ninth mistake is pressure washing a roof, which strips the shingle granules and voids the roof warranty. Avoid all of these by using the right nozzle, the right pressure, a downward angle, and a steady, moving stroke, and the house will come out clean with no damage.

When should you hire a professional instead of doing it yourself?

Hire a professional to pressure wash your house when it is two or three stories tall, when the siding is old, painted, or damaged, when the house has heavy mildew or algae, or when you have never used a pressure washer before. A professional costs $200 to $600, carries insurance that covers any damage, and knows the pressure and the nozzle for each siding type, which is the part that damages houses when it is wrong. Hire a professional for a roof, because a roof should be soft washed at under 100 PSI and a pressure washer will strip the shingle granules and void the warranty. Hire a professional for a house with lead paint, because lead paint is a health hazard and the wash water must be contained and disposed of properly, and a do-it-yourselfer who washes lead paint into the soil can face a fine. Hire a professional when the house is on a steep slope or a tight lot, because the ladder work and the hose management are dangerous for a first-timer.

Do it yourself when the house is one or two stories, the siding is vinyl, brick, or fiber cement in good condition, and you are comfortable with the machine. A do-it-yourself job costs $100 to $200 in rental and supplies and takes 2 to 4 hours, and it saves $100 to $400 over a professional. Rent the machine on a weekday, pick it up the evening before, and read the manual before you start, because each machine has a different start procedure and a different detergent injector. Practice on a driveway or a fence first, so you learn the kickback and the spray pattern before you aim at the house. If the siding is wood, stucco, or painted and peeling, consider a soft wash from a professional instead, because the margin for error is small and the damage is expensive: repainting a house costs $2,500 to $6,500, which is 10 times the cost of a professional wash. Check the full painting cost in the exterior painting cost guide before you decide, because a wash is usually the first step toward a paint job, and a good wash makes the paint last years longer.

Frequently asked questions

Keep reading

Exterior House Painting: Prep, Weather Windows and Paint That Lasts

How-To

Prep is roughly 80 percent of a lasting exterior paint job, and two coats of quality acrylic paint last 8 to 12 years.

Read the article

House Siding Buying Guide: Vinyl, Fiber Cement, Wood and Brick Compared

Tips & Tricks

Vinyl is cheap and nearly maintenance-free, fiber cement lasts 50 years, wood is beautiful and demanding, brick is forever — the right siding is a 30-year decision, and the cost per square foot is only the first number that matters.

Read the article