Article — Tips & Tricks · November 18, 2026 · 15 min read
Outdoor Fireplace vs Fire Pit: Cost, Permits and What Actually Lasts
An outdoor fireplace costs $1,500 to $20,000: a prefabricated metal fireplace runs $1,500 to $5,000, a masonry fireplace runs $5,000 to $20,000, and a simple fire pit runs $300 to $3,000.
An outdoor fireplace costs $1,500 to $20,000 depending on the type: a prefabricated metal fireplace runs $1,500 to $5,000, a masonry fireplace runs $5,000 to $20,000, and a simple fire pit runs $300 to $3,000. The fireplace gives you a chimney that carries smoke up and away, a structure that blocks wind, and a focal point that adds $5,000 to $15,000 to a home's resale value, while a fire pit costs less, seats people on all sides, and suits a casual backyard. Choose a fireplace when you want smoke control, a permanent structure, and a design feature, and choose a fire pit when you want the lowest cost and the most flexible seating. Compare the full patio project in the patio cost guide, plan the space around it with the outdoor kitchen planning guide, and read the safety rules in the fire pit safety and buying guide.
Outdoor fireplace or fire pit: which is better?
An outdoor fireplace is better when you want smoke control, wind protection, and a permanent design feature, because the chimney carries smoke up and away from the seating area, the firebox blocks wind from three sides, and the structure anchors the patio the way a fireplace anchors a living room. A fire pit is better when you want the lowest cost, the most flexible seating, and a casual gathering spot, because a fire pit costs $300 to $3,000, seats people in a full circle, and can be moved or removed. The fireplace costs 5 to 10 times more than a fire pit, takes up more space, and needs a permit in most towns, while the fire pit needs no permit in most places and can be built in a weekend. The choice comes down to how you use the backyard: a fireplace suits a family that entertains on the patio most weekends and wants a permanent outdoor room, while a fire pit suits a family that wants a simple spot for marshmallows and conversation a few times a month.
Heat is the other difference. A fireplace throws heat forward from the firebox, so the seats directly in front of it get warm while the seats to the side stay cool, and a fireplace heats a zone of about 100 to 200 sq ft (9.3 to 18.6 sq m) in front of it. A fire pit radiates heat in all directions, so everyone around it gets warm, and a fire pit heats a circle of about 150 to 250 sq ft (14 to 23 sq m) around it. Smoke is the biggest complaint about fire pits: without a chimney, the smoke follows the wind, and on a still evening it hangs over the seating area. A fireplace solves that problem, because the chimney draws the smoke up and the fire burns hotter and cleaner. Maintenance is similar for both: both need the ash cleaned out after every few fires, both need a cover when not in use, and both need the fuel stored dry. A fireplace lasts longer than a fire pit, because a masonry fireplace lasts 30 to 50 years while a steel fire pit lasts 3 to 5 years and a stone fire pit lasts 10 to 20 years.
How much does an outdoor fireplace cost?
An outdoor fireplace costs $1,500 to $20,000 installed, and the price depends on the type, the materials, and whether it is prefabricated or built on site. A prefabricated metal fireplace costs $1,500 to $5,000, with the unit at $800 to $3,000 and installation at $700 to $2,000, and it takes 1 to 2 days to install. A prefabricated concrete or stone-veneer fireplace kit costs $3,000 to $8,000, with the kit at $2,000 to $5,000 and installation at $1,000 to $3,000, and it takes 2 to 4 days to build. A custom masonry fireplace, built from brick or natural stone with a concrete footing, costs $5,000 to $20,000, with materials at $2,000 to $8,000 and labor at $3,000 to $12,000, and it takes 1 to 3 weeks to build. A gas fireplace costs $500 to $1,500 more than a wood-burning model, because it needs a gas line run at $500 to $1,000 and a gas burner and controls at $300 to $800, but it needs no chimney cleaning and lights with a switch.
The foundation is a cost that surprises many homeowners: a masonry fireplace needs a concrete footing 12 in (30 cm) thick and 12 in wider than the fireplace on every side, which costs $500 to $1,500, and it needs a patio or slab that can carry the weight, because a masonry fireplace weighs 2,000 to 5,000 lbs (907 to 2,268 kg) and will crack a thin patio. A prefabricated metal fireplace needs only a level, noncombustible base, such as a concrete paver or a stone slab, which costs $100 to $300. The chimney is the second surprise: a masonry chimney costs $1,000 to $3,000 of the total, and a metal chimney for a prefabricated unit costs $300 to $800. A permit costs $100 to $500 where required, and a gas line costs $500 to $1,000. Budget $2,000 to $5,000 for a good prefabricated fireplace installed on a patio, $5,000 to $10,000 for a stone-veneer kit with a gas burner, and $10,000 to $20,000 for a custom masonry fireplace with a full chimney. Price the patio it sits on with the patio cost guide, because a fireplace on a cracked or undersized patio is a waste of money.
What are outdoor fireplaces made of and which material lasts longest?
Natural stone is the longest-lasting outdoor fireplace material, with a life of 30 to 50 years, because it resists heat, weather, and freeze-thaw cycles without cracking or fading. A natural stone fireplace costs $8,000 to $20,000, because the stone is heavy, the mason's labor is slow, and the footing must carry 3,000 to 5,000 lbs (1,361 to 2,268 kg). Brick is the second most durable material, lasting 25 to 40 years, and it costs $5,000 to $12,000, because brick is cheaper than stone and faster to lay. Brick needs a firebrick lining in the firebox, because standard brick cracks under direct flame, and the mortar joints need repointing every 10 to 15 years. Stone veneer over a concrete block core costs $4,000 to $10,000 and lasts 20 to 30 years, and it looks like solid stone at half the price, but the veneer can delaminate if water gets behind it, so it needs proper flashing and a cap that sheds water.
Prefabricated concrete fireplaces cost $3,000 to $8,000 and last 15 to 25 years, and they arrive as molded sections that stack together in 2 to 4 days, which makes them the fastest option. Steel fireplaces cost $1,500 to $5,000 and last 10 to 15 years, and they are the lightest option, so they need the smallest footing, but the steel rusts and the paint burns off in the firebox, so they need repainting every 2 to 3 years. Cast aluminum fireplaces cost $1,000 to $3,000 and last 5 to 10 years, and they are light enough to move, but they are the least durable and the firebox is small. The firebox lining matters more than the outside material: a firebrick lining lasts 20 to 30 years and costs $200 to $500 to install, while a steel firebox insert lasts 5 to 10 years and costs $100 to $300 to replace. Choose natural stone or brick for a permanent fireplace that will outlast the house, choose stone veneer for the best balance of looks and price, and choose steel or concrete for a fireplace that you may want to move or replace within a decade.
Do you need a permit for an outdoor fireplace?
Yes, most towns require a permit for a permanent outdoor fireplace, because it is a structure with a chimney, a foundation, and a fire hazard, and the permit costs $100 to $500. The permit process checks three things: the setback from the property line, which is usually 10 to 15 ft (3.0 to 4.6 m), the distance from the house and from other structures, which is usually 10 ft, and the height of the chimney, which must clear the roofline by at least 2 ft (0.6 m) if it is within 10 ft of the house. A masonry fireplace almost always needs a permit, because it needs a concrete footing that must be inspected before the concrete is poured, and a gas fireplace always needs a permit, because it needs a gas line that must be pressure-tested and inspected. A prefabricated metal fireplace that sits on a patio with no footing may not need a building permit in some towns, but it may still need a fire department review, so call the building department before you buy.
The permit process also checks the local fire code, which sets the rules for open burning, the fuel type, and the spark arrestor on the chimney. Most towns ban open burning during dry or windy conditions, and many require a spark arrestor, which is a mesh screen on top of the chimney that costs $30 to $80 and stops embers from landing on the roof or the neighbor's yard. Some homeowners associations ban outdoor fireplaces entirely, or restrict them to gas only, so check the HOA rules before you spend any money. A fireplace built without a permit can be ordered removed, which wastes the entire $5,000 to $20,000 investment, and an unpermitted gas fireplace can void your homeowner's insurance if there is a fire. Apply for the permit before you order the fireplace, because the approval takes 1 to 4 weeks, and the building department may ask for a site plan showing the setbacks and the footing. A fire pit, by contrast, usually needs no permit, because it is not a permanent structure, but it still must follow the fire code and the HOA rules, so check those before you build one. Read the safety rules in the fire pit safety and buying guide, because the same clearance and fuel rules apply to both.
Where should you place an outdoor fireplace?
Place an outdoor fireplace on the patio where the prevailing wind blows the smoke away from the seating area and the house, with at least 10 ft (3.0 m) of clearance from the house, the fence, and any trees or overhanging branches. The fireplace should face the seating area, so the heat reaches the chairs, and it should sit on the edge of the patio, not in the middle, so it does not block the traffic flow. Check the wind direction on a few evenings before you choose the spot: stand where the fireplace will go, light a small fire or a candle, and watch where the smoke goes. If the wind blows from the west most evenings, put the fireplace on the east side of the patio, so the smoke blows away from the house and the seating area. Leave at least 3 ft (0.9 m) of clear space in front of the firebox for the hearth, which is the noncombustible apron that catches sparks and embers, and leave 6 ft (1.8 m) of clear space in front of that for the seating.
The patio under the fireplace must carry the weight: a masonry fireplace weighs 2,000 to 5,000 lbs, so it needs a concrete footing or a reinforced slab, not a paver patio on sand, which will settle and crack. A prefabricated metal fireplace weighs 200 to 800 lbs (91 to 363 kg), so it can sit on a paver patio or a concrete slab. Never place a fireplace under a pergola, a roof, or a tree canopy, because the heat and the sparks are a fire hazard, and never place it against a wooden fence or a shed, because the radiant heat can ignite wood at 10 ft. Keep the fireplace away from the neighbor's yard, because smoke is the most common neighbor complaint, and a fireplace that smokes out the neighbor's patio will draw a code complaint. Plan the whole space with the outdoor kitchen planning guide, because a fireplace, a grill, and a dining table need to fit together without crowding each other. A fireplace placed well becomes the center of the backyard for 20 years; a fireplace placed badly becomes a smoke machine that nobody uses.
How do you maintain an outdoor fireplace and keep it safe?
Maintain an outdoor fireplace by cleaning the ash after every few fires, inspecting the chimney once a year, and covering it when not in use, and the routine takes 30 minutes a month during the burning season. Scoop the ash out with a metal shovel into a metal bucket, let it cool for 48 hours before you throw it away, and never put hot ash in a plastic bag or a paper bag, because ash stays hot enough to start a fire for 2 days. Clean the firebox with a stiff brush and water once a month, and check the firebrick lining for cracks: a crack wider than 1/8 in (3 mm) needs repair with refractory mortar, which costs $10 to $20 a tub. Inspect the chimney every fall for cracks, loose mortar, and creosote buildup, and have it swept once a year if you burn wood, because creosote is flammable and a chimney fire can reach 2,000 degrees Fahrenheit (1,093 degrees Celsius). A chimney sweep costs $150 to $300. Cover the fireplace with a fitted cover when it rains, because water in the firebox freezes, expands, and cracks the masonry.
Burn only dry, seasoned hardwood, which has been split and stacked for 6 to 12 months and reads under 20 percent moisture on a moisture meter, because wet wood smokes, burns cool, and builds creosote fast. Never burn treated lumber, painted wood, plywood, or trash, because treated wood releases arsenic and other chemicals, and painted wood releases lead. Keep a fire extinguisher or a bucket of sand within 10 ft of the fireplace, and never leave a fire unattended, because a wind gust can blow embers 10 to 20 ft. Keep children and pets at least 3 ft from the firebox, and install a spark screen across the opening when the fire is burning. Check the gas line once a year if you have a gas fireplace, and have a plumber test it for leaks with soapy water, because a gas leak near an open flame is a serious hazard. A fireplace that is cleaned, covered, and inspected once a year lasts 30 to 50 years; a fireplace that is left full of ash, uncovered in the rain, and never swept lasts 10 years and becomes a safety risk.
Frequently asked questions
An outdoor fireplace costs $1,500 to $20,000 installed. A prefabricated metal fireplace costs $1,500 to $5,000, a prefabricated concrete or stone-veneer kit costs $3,000 to $8,000, and a custom masonry fireplace costs $5,000 to $20,000. A gas fireplace costs $500 to $1,500 more for the gas line and burner. The foundation costs $500 to $1,500 for a masonry fireplace, and the permit costs $100 to $500. A simple fire pit costs $300 to $3,000 by comparison. Budget $2,000 to $5,000 for a good prefabricated fireplace and $10,000 to $20,000 for a custom masonry fireplace.
An outdoor fireplace is better when you want smoke control, wind protection, and a permanent design feature, because the chimney carries smoke up and away and the firebox blocks wind. A fire pit is better when you want the lowest cost and the most flexible seating, because it costs $300 to $3,000, seats people in a full circle, and needs no permit in most places. A fireplace heats 100 to 200 sq ft in front of it, while a fire pit heats 150 to 250 sq ft around it. A masonry fireplace lasts 30 to 50 years, while a steel fire pit lasts 3 to 5 years.
Yes, most towns require a permit for a permanent outdoor fireplace, and the permit costs $100 to $500. The permit checks the setback from the property line, usually 10 to 15 ft, the distance from the house, usually 10 ft, and the chimney height, which must clear the roofline by at least 2 ft if it is within 10 ft of the house. A masonry fireplace needs a footing inspection, and a gas fireplace needs a gas line inspection. A fireplace built without a permit can be ordered removed. A fire pit usually needs no permit, but it must still follow the fire code and any HOA rules.
An outdoor fireplace should be at least 10 ft (3.0 m) from the house, the fence, and any trees or overhanging branches, and at least 10 to 15 ft from the property line in most towns. Leave 3 ft of clear space in front of the firebox for the hearth and 6 ft of clear space in front of that for seating. Never place a fireplace under a pergola, a roof, or a tree canopy, and never place it against a wooden fence or shed, because the radiant heat can ignite wood at 10 ft. Place it so the prevailing wind blows smoke away from the seating area and the house.
Burn only dry, seasoned hardwood in an outdoor fireplace, split and stacked for 6 to 12 months and under 20 percent moisture on a moisture meter. Dry hardwood burns hot and clean with little smoke and little creosote. Never burn treated lumber, painted wood, plywood, or trash, because treated wood releases arsenic and painted wood releases lead. Never burn wet wood, because it smokes, burns cool, and builds creosote fast, which is a chimney fire risk. Gas fireplaces burn natural gas or propane, need no fuel storage, and light with a switch, but they cost $500 to $1,500 more to install.
Keep reading
Fire Pit Safety and Buying Guide: Wood, Gas and Placement Rules
Tips & TricksA fire pit should sit at least 10 to 20 ft from your house, fences, and overhanging trees, with 21 ft of clear sky above it — a 36 to 44 in wood pit costs $100 to $500 and a gas pit costs $300 to $2,000, and a 20 lb propane tank lasts 4 to 5 hours at 40,000 BTU.
Read the articleOutdoor Kitchen Planning Guide: Budget, Layout, Appliances and Weather
Tips & TricksPlan an outdoor kitchen around a budget of $5,000 to $15,000 basic, $15,000 to $35,000 mid-range, and $35,000-plus full — and decide the layout before buying appliances.
Read the article