Article — Tips & Tricks · November 9, 2026 · 15 min read
Fire Pit Safety and Buying Guide: Wood, Gas and Placement Rules
A fire pit should sit at least 10 to 20 ft from your house, fences, and overhanging trees, with 21 ft of clear sky above it — a 36 to 44 in wood pit costs $100 to $500 and a gas pit costs $300 to $2,000, and a 20 lb propane tank lasts 4 to 5 hours at 40,000 BTU.
A fire pit should sit at least 10 to 20 ft from your house, fences, and overhanging trees, with 21 ft of clear sky above it, and the right choice for most homeowners is a 36 to 44 in wood-burning pit for the real fire experience or a 40,000 to 65,000 BTU gas pit for instant, smoke-free heat. Wood pits cost $100 to $500 and cost almost nothing to run, while gas pits cost $300 to $2,000 or more but light with a switch and never need wood stacked, split, or cleaned out. Before you buy, measure the patio with the Square Footage Calculator, work out how many pavers the base needs with the Paver Calculator, check what the patio itself costs in the patio cost guide, and plan the rest of the backyard around it with the outdoor kitchen planning guide.
Wood, gas or propane: which fire pit is right for you?
Wood-burning fire pits give you the biggest flames, the most heat, and the crackle and smell people picture when they think of a backyard fire, and they cost the least to buy and run. A steel or cast iron wood pit in the 36 to 44 in range costs $100 to $500, a cord of seasoned hardwood costs $200 to $400 and lasts a full season of weekend fires, and a wood fire puts out 60,000 to 100,000 BTU of heat — more than most gas pits. The trade-off is work: you need dry storage for the wood, you have to light the fire and tend it, the smoke follows the wind and gets into clothes and hair, and you have to clean out ash after every fire. If you love the ritual and you have room to store wood, wood is the right choice.
Gas fire pits trade the ritual for convenience. A propane pit runs off a standard 20 lb tank hidden in the base, lights with a push-button igniter, and produces a clean, steady flame with no smoke, no sparks, and no ash to clean. A 20 lb tank lasts 4 to 5 hours at 40,000 BTU and 2 to 3 hours at 65,000 BTU, and a refill costs $15 to $25. A natural gas pit connects to the house gas line, so it never runs out, but it needs a licensed plumber to run the line — $500 to $1,500 depending on distance — and it stays where it is installed. Gas pits cost $300 to $2,000 for a portable unit and $1,500 to $5,000 for a built-in table, and they put out less heat than a wood fire of the same size, so they suit smaller patios and shorter evening sits. If you want a fire in 30 seconds on a Tuesday night with no cleanup, gas wins. If you want the fire against a wall with a chimney that carries the smoke up and away, a pit is the wrong shape — an outdoor fireplace costs more but suits a patio where smoke and sparks need to go up, not out.
How far should a fire pit be from the house?
Place a fire pit at least 10 ft from your house, garage, shed, fence, and any other structure, and 20 to 25 ft is better for a wood-burning pit that throws sparks. The 10 ft minimum comes from most manufacturers and local fire codes, but it is a minimum, not a recommendation: at 10 ft a wind-blown ember can still reach a wood deck or a pile of dry leaves, and the radiant heat from a big wood fire can warp vinyl siding at that distance. Measure from the edge of the fire, not from the edge of the patio, and remember that a fire pit on a patio still needs the same clearance — a pit sitting 6 ft from the house on a 12 ft deep patio is too close even though it feels tucked in. Overhead clearance matters just as much: keep 21 ft of clear sky above the fire, away from tree branches, pergolas, and patio covers, because heat rises and a branch 10 ft above a wood fire will scorch and dry out over a season.
Check the local rules before you buy, because they vary more than most homeowners expect. Many cities require a permit for a built-in fire pit, some ban wood-burning fires entirely during dry months, and homeowners associations commonly restrict fire pits to gas-only or ban them outright. A quick call to the fire department or a check of the city website answers all three questions in five minutes, and it is far cheaper than a fine or a forced removal. If you rent, check the lease too — many landlords prohibit open flames, and a fire pit on a rental patio can be a lease violation. When in doubt, a portable gas pit is the safest bet: it is the least likely to be restricted, the easiest to move, and the least likely to damage the patio underneath it.
What surface should a fire pit sit on?
A fire pit belongs on a non-combustible surface: a paver patio, a concrete slab, a gravel bed, or bare dirt, and never directly on a wood deck or a composite deck unless the pit is specifically rated for deck use and sits on a heat shield. Pavers are the best base because they do not crack from heat the way a thin concrete slab can, they drain rainwater, and a single damaged paver can be replaced in minutes. Build the base as a level pad at least 3 ft wider than the pit on every side — a 36 in pit needs a pad at least 9 ft across — so embers that escape the bowl land on stone, not on grass or mulch. A 4 in bed of compacted gravel under the pavers keeps the pad level and drains water away from the fire.
A wood deck is the surface that causes the most damage and the most fires. Wood-burning pits throw embers and radiate enough heat downward to scorch deck boards, and a single ember in a gap between boards can smolder unseen for an hour before it catches. If the deck is the only option, use a gas pit on a purpose-built fire pit mat or a 36 in by 36 in heat shield rated for deck use, keep the pit at least 3 ft from any railing, and never leave it burning unattended. Composite decking is no safer — it melts and warps under heat even though it does not catch fire as easily as wood. For a permanent fire pit, the right answer is a dedicated pad away from the deck: a 10 ft by 10 ft paver pad costs $500 to $1,500 installed and gives you a safe, level, attractive spot that adds value to the yard instead of risking the deck.
Smoke, embers and the rules: permits, burn bans and HOAs
Smoke is the number one complaint neighbors make about fire pits, and it is the reason most local rules exist, so managing it is both good manners and good legal sense. Burn only dry, seasoned hardwood — oak, maple, hickory, or ash that has been split and stacked for at least 6 months and has a moisture content under 20 percent. Green or wet wood smokes heavily, burns cool, and coats the pit and everything near it in creosote. Never burn treated lumber, painted wood, plywood, particle board, or household trash: treated wood releases arsenic and other chemicals, painted wood releases lead and toxic fumes, and burning trash is illegal in most areas and can draw a fine of $100 to $500 on the first offense. A spark screen — a mesh dome that sits over the bowl — costs $30 to $80 and stops 90 percent of embers, and it is the single best safety accessory for a wood pit.
Burn bans are not suggestions. During dry, windy conditions many counties issue temporary bans on all open burning, and a fire lit during a ban can bring a fine of $500 to $1,000 plus liability for any damage if it escapes. Check the ban status before lighting a fire — the county fire department website or a quick phone call takes two minutes. Homeowners associations add another layer: many allow gas pits but ban wood, many limit fire pit hours to before 10 p.m., and some require the pit to be a specific distance from property lines. Read the HOA rules before you buy, not after, because an association can require you to remove a non-compliant pit at your own expense. Keep a copy of the permit or the HOA approval with the pit, and keep a garden hose or a 5-gallon bucket of water within reach every time the fire is lit.
Lighting and using a fire pit safely every time
Light a wood fire the same way every time: a bed of dry kindling and fire starters in the center, small split logs arranged in a teepee over it, and no lighter fluid or gasoline, ever. Lighter fluid and gasoline cause flash fires that burn hands and faces, and they are the cause of most fire pit injuries treated in emergency rooms. Light the kindling with a long lighter or a match, let the small wood catch fully before adding larger logs, and add one or two logs at a time rather than loading the pit full — a fire that is too big throws more embers and is harder to control. Keep the fire to a manageable size: flames should stay below the rim of the pit, and if they are reaching 3 ft above it, the fire is too big. Establish a 3 ft safety circle around the pit that kids and pets stay outside of, and mark it with the seating — chairs set 3 to 4 ft back from the edge give adults a comfortable distance and keep small children from reaching the bowl.
Extinguishing the fire properly matters as much as lighting it. Stop adding wood 30 to 45 minutes before you plan to go inside, let the fire burn down to coals, then spread the coals out with a poker and douse them slowly with water, stirring until nothing hisses or steams. A fire that looks out can stay hot enough to reignite for hours, and embers buried in ash can stay hot overnight — never leave a fire pit unattended until it is cold to the touch. Keep a fire extinguisher rated ABC within 10 ft of the pit, or at minimum a charged garden hose, and teach everyone in the household where it is. If anyone gets a burn, cool it under running water for 10 to 20 minutes, do not apply ice, butter, or ointments, and seek medical care for any burn larger than the palm of a hand or any burn on the face or hands.
Maintenance and storage through the seasons
A fire pit lasts years longer when it is cleaned and covered, and the maintenance takes about 15 minutes after each fire. Scoop out ash once it is completely cold — ash holds moisture against the metal and rusts a steel pit from the inside out, and a pit left full of wet ash over winter can rust through in a single season. Scrub the bowl with a wire brush, wipe it with a thin coat of cooking oil or a high-heat stove polish to slow rust, and store a portable pit under a fitted cover or in the garage during the off-season. A cover costs $20 to $40 and pays for itself the first winter by keeping rain out of the bowl. Cast iron pits need the most care: oil the interior after every cleaning, and store them dry, because cast iron rusts fast and the rust is hard to remove once it pits the surface.
For gas pits, the maintenance is about the burner and the gas line. Clean the burner ports once a season with a soft brush or compressed air, because a clogged port makes the flame uneven and can cause a dangerous flare-up when gas pools and ignites all at once. Check the propane hose for cracks, brittleness, or chew marks from animals, and replace it at the first sign of wear — a hose costs $15 to $30 and a gas leak costs far more. Test for leaks by brushing soapy water on the connections and watching for bubbles, and never use a match to check for a gas leak. At the end of the season, disconnect the propane tank, store it upright outdoors, and cover the pit. A built-in natural gas pit needs an annual check by the plumber who installed it, and the gas valve should be shut off at the house when the pit will not be used for months.
Frequently asked questions
A fire pit should be at least 10 ft from your house, garage, shed, fence, and any other structure, and 20 to 25 ft is better for a wood-burning pit that throws sparks. Measure from the edge of the fire, not from the edge of the patio. Keep 21 ft of clear sky above the fire, away from tree branches, pergolas, and patio covers. Check local fire codes before you buy, because some cities require a greater distance or a permit for a built-in pit, and homeowners associations commonly add their own rules.
Do not put a wood-burning fire pit on a wood or composite deck. Wood pits throw embers and radiate enough heat downward to scorch deck boards, and an ember in a gap between boards can smolder unseen for an hour before catching fire. Composite decking melts and warps under heat. If the deck is the only option, use a gas pit on a purpose-built fire pit mat or a 36 in by 36 in heat shield rated for deck use, keep it 3 ft from railings, and never leave it burning unattended. The safer answer is a dedicated paver pad away from the deck.
Wood fire pits give the biggest flames, the most heat at 60,000 to 100,000 BTU, and the classic campfire experience, and they cost $100 to $500 with cheap fuel. Gas pits cost $300 to $2,000, light with a switch, produce no smoke, sparks, or ash, and need no wood storage or cleanup. A 20 lb propane tank lasts 4 to 5 hours at 40,000 BTU. Choose wood if you love the ritual and have room to store seasoned hardwood; choose gas if you want a fire in 30 seconds on a weeknight with no cleanup, or if local rules restrict wood burning.
A 36 to 44 in fire pit is the right size for most backyards: big enough for a real fire that 4 to 6 people can sit around, and small enough to heat efficiently. A pit under 30 in feels cramped with more than two people and needs constant tending, while a pit over 48 in burns through wood fast, throws more embers, and is hard to keep evenly lit. Match the pit to the patio: the pad should be at least 3 ft wider than the pit on every side, so a 36 in pit needs a pad at least 9 ft across, and chairs should sit 3 to 4 ft back from the edge.
It depends on where you live and what kind of pit you are installing. Many cities require a permit for a built-in fire pit, some ban wood-burning fires during dry months, and some require the pit to be a set distance from property lines. Portable gas pits usually need no permit. Call the local fire department or check the city website before you buy — it takes five minutes and is far cheaper than a fine or a forced removal. If you belong to a homeowners association, check its rules too, because many HOAs restrict fire pits to gas-only or ban them outright.
Keep reading
Outdoor Kitchen Planning Guide: Budget, Layout, Appliances and Weather
Tips & TricksPlan an outdoor kitchen around a budget of $5,000 to $15,000 basic, $15,000 to $35,000 mid-range, and $35,000-plus full — and decide the layout before buying appliances.
Read the article