Article — Tips & Tricks · November 16, 2026 · 15 min read
Concrete Patio vs Pavers: Cost, Durability and Maintenance Compared
A concrete patio costs $6 to $15 per sq ft and lasts 25 to 30 years, while a paver patio costs $12 to $25 per sq ft and lasts 30 to 50 years: pavers cost twice as much up front but can be repaired one piece at a time, while a cracked slab is a permanent patch.
A concrete patio costs $6 to $15 per sq ft ($65 to $161 per sq m) installed, while a paver patio costs $12 to $25 per sq ft ($129 to $269 per sq m) installed, so pavers cost roughly twice as much up front for a 200 sq ft (18.6 sq m) patio: $1,200 to $3,000 for concrete against $2,400 to $5,000 for pavers. Concrete lasts 25 to 30 years and needs resealing every 2 to 3 years. Pavers last 30 to 50 years, need the joints re-sanded every 2 to 3 years, and can be repaired one paver at a time instead of replacing the whole slab. The right choice depends on your budget, your soil, and whether you want a surface that can be fixed in pieces. Price the materials with the Concrete Calculator and the Paver Calculator, read the patio cost guide for the full breakdown, and read the patio paver installation guide before you choose a surface.
How much does a concrete patio cost vs a paver patio?
A concrete patio costs $6 to $15 per sq ft installed, and a paver patio costs $12 to $25 per sq ft installed, so for a standard 12 by 16 foot (3.7 by 4.9 m) patio of 192 sq ft (17.8 sq m), concrete costs $1,150 to $2,900 and pavers cost $2,300 to $4,800. The concrete price breaks down into $3 to $6 per sq ft ($32 to $65 per sq m) for the concrete, rebar, and labor, plus $1 to $3 per sq ft ($11 to $32 per sq m) for stamping or coloring, plus $500 to $1,000 for excavation and base preparation. The paver price breaks down into $4 to $10 per sq ft ($43 to $108 per sq m) for the pavers themselves, $3 to $5 per sq ft ($32 to $54 per sq m) for the base and labor, and $500 to $1,000 for excavation. A 400 sq ft (37.2 sq m) patio costs $2,400 to $6,000 in concrete and $4,800 to $10,000 in pavers, and the gap widens with size because pavers are priced per piece and per square foot of labor.
The lifetime cost tells a different story than the upfront price. Over 30 years, a concrete patio costs $1,200 to $3,000 to install plus $600 to $1,200 in resealing, for a total of $1,800 to $4,200. A paver patio costs $2,400 to $5,000 to install plus $400 to $800 in joint sand and sealer, for a total of $2,800 to $5,800. The gap narrows because concrete repairs are expensive: a cracked slab costs $500 to $1,500 to patch and the patch is always visible, while a paver repair costs $100 to $300 to lift and replace a few pavers and is invisible when done. If you plan to stay in the house for 20 years or more, the lifetime cost difference is 20 to 30 percent, not 100 percent. If you plan to sell within 5 years, concrete is the better value, because the buyer sees a clean patio and the lower price shows up in your renovation budget, not in the sale price.
Which lasts longer: concrete or pavers?
Pavers last longer than concrete: a paver patio lasts 30 to 50 years, while a concrete patio lasts 25 to 30 years, because pavers flex with the ground and concrete does not. Concrete is a single rigid slab, so when the soil underneath moves, the slab cracks, and every crack is permanent. Pavers are individual units sitting on a compacted gravel base, so when the soil moves, a few pavers settle and can be lifted, re-leveled, and put back in an afternoon. In a freeze-thaw climate, concrete faces 50 to 100 freeze-thaw cycles a year, and water that seeps into hairline cracks expands when it freezes, widening the cracks every winter. Pavers handle freeze-thaw far better, because water drains through the joints instead of sitting on the surface, and a paver that heaves in winter can be reset in spring. In a hot climate, concrete can reach 120 to 140 degrees Fahrenheit (49 to 60 degrees Celsius) in direct sun, and dark pavers get just as hot, but light-colored pavers stay 10 to 20 degrees Fahrenheit (6 to 11 degrees Celsius) cooler than a dark concrete slab.
Soil type decides the winner more than climate does. On stable, well-drained soil, a concrete patio lasts 30 years with only minor hairline cracks. On expansive clay soil, which swells when wet and shrinks when dry, a concrete slab cracks within 3 to 5 years, while pavers flex with the movement and last their full 30 to 50 years. On sandy soil, both surfaces perform well, but pavers need a deeper base — 6 to 8 inches (15 to 20 cm) of compacted gravel instead of 4 inches (10 cm) — or the pavers will sink under heavy furniture. If your driveway has cracked concrete, your soil moves, and pavers are the safer bet. If your soil is stable and your budget is tight, concrete with control joints every 8 to 10 feet (2.4 to 3.0 m) and a fiber-reinforced mix will last 25 years with only hairline cracks that are easy to live with.
How does maintenance compare between concrete and pavers?
Concrete maintenance means resealing every 2 to 3 years, cleaning stains as they happen, and repairing cracks when they appear, at a total cost of $200 to $400 per year. Resealing a 200 sq ft (18.6 sq m) patio costs $150 to $300 if you hire it out, or $50 to $100 in sealer if you do it yourself with a pump sprayer in 2 hours. Stains from grease, leaves, and rust are the main problem: a grease stain needs a degreaser and a pressure washer within a week, or it sets permanently, and a leaf stain needs a bleach solution within a month. Cracks wider than 1/4 inch (6 mm) need a concrete crack filler at $10 to $20 per tube, and a crack wider than 1/2 inch (13 mm) needs a professional repair at $300 to $800, because the slab is moving and the filler will not hold.
Paver maintenance means re-sanding the joints every 2 to 3 years, sealing every 3 to 5 years, and pulling weeds from the joints, at a total cost of $150 to $300 per year. Re-sanding a 200 sq ft (18.6 sq m) patio takes 1 to 2 hours: sweep polymeric sand into the joints, mist it with water, and let it harden into a weed-resistant seal that costs $20 to $40 per bag. Sealing costs $100 to $250 hired out or $40 to $80 in sealer do-it-yourself, and it keeps the color from fading and the sand from washing out. Weeds are the main complaint with pavers, but polymeric sand and a yearly application of a pre-emergent weed killer keep them down to a few minutes of pulling per month. Stains on pavers are easier to fix than stains on concrete: a stained paver lifts out and a new one goes in for $5 to $15 per paver, while a stained concrete slab needs a pressure washer, a chemical cleaner, and sometimes a full reseal to look right again.
Which looks better: stamped concrete or pavers?
Pavers look better than stamped concrete in most cases, because pavers have real joints, real texture, and real color variation, while stamped concrete imitates those things with a pattern pressed into a single surface. Stamped concrete costs $12 to $20 per sq ft ($129 to $215 per sq m), which is close to the price of pavers, and it looks convincing from 10 feet (3.0 m) away, but up close the pattern repeats every 4 to 6 feet (1.2 to 1.8 m), the color is a surface stain that fades in 5 to 7 years, and a crack through the pattern is impossible to hide. Pavers come in dozens of shapes, sizes, and colors, from 4 by 8 inch (10 by 20 cm) brick pavers to 12 by 24 inch (30 by 61 cm) slabs, and they can be laid in herringbone, basketweave, running bond, or random patterns that give the patio a crafted look no stamped surface can match. A paver border in a contrasting color costs $2 to $4 per linear foot ($6.60 to $13.10 per m) and makes the whole patio look finished.
Plain broom-finished concrete looks better than most people expect, and it costs $6 to $9 per sq ft ($65 to $97 per sq m), half the price of pavers. A broom finish gives the surface a fine texture that grips wet feet, and a border tooled into the edge or a saw-cut pattern every 4 feet (1.2 m) makes it look intentional rather than plain. Colored concrete costs $1 to $3 per sq ft ($11 to $32 per sq m) extra and adds a warm gray, tan, or terracotta tint that holds up better than a surface stain, because the color is mixed into the concrete rather than painted on top. Exposed aggregate concrete costs $10 to $14 per sq ft ($108 to $151 per sq m) and shows the pebbles in the mix, giving a natural stone look that hides stains and dirt. If your house is a modern design with clean lines, large-format pavers or a smooth concrete slab with saw-cut joints fits best. If your house is traditional or craftsman, brick pavers or stamped concrete in a stone pattern fits best.
Can you repair a concrete patio, and can you repair pavers?
You can repair a concrete patio, but the repair is always visible, while you can repair a paver patio invisibly by replacing individual pavers. A hairline crack under 1/8 inch (3 mm) needs no repair: it is a normal result of concrete curing and it does not affect the strength of the slab. A crack of 1/8 to 1/4 inch (3 to 6 mm) takes a concrete crack filler at $10 to $20 per tube, applied with a caulk gun in 30 minutes, and it will hold for 2 to 3 years before it needs reapplication. A crack wider than 1/4 inch (6 mm) or a slab that has settled more than 1/2 inch (13 mm) needs a professional repair: mudjacking costs $500 to $1,500 and pumps grout under the slab to lift it back to level, while a full slab replacement costs $6 to $15 per sq ft ($65 to $161 per sq m), the same as a new patio. A spalled surface, where the top layer flakes off from freeze-thaw damage, needs a resurfacer at $2 to $4 per sq ft ($22 to $43 per sq m), and the resurfacer lasts 5 to 10 years before it needs reapplication.
A paver repair takes 1 to 2 hours and costs $100 to $300: pry up the damaged or settled pavers with two flat screwdrivers, add or remove base material to level the spot, sweep in polymeric sand, and set the pavers back in place. Keep 10 to 20 spare pavers from the original batch, because a replacement paver from a different dye lot will be a slightly different shade. A settled area of 10 to 20 pavers takes half a day to fix and costs $200 to $400 if you hire it out. A paver patio that heaves in winter from frost can be reset in spring in a day, while a concrete slab that heaves from frost is cracked permanently and needs a full replacement. The repairability of pavers is the single biggest reason to choose them over concrete if you plan to stay in the house for more than 10 years.
Concrete patio vs pavers: which should you choose?
Choose concrete if your budget is under $3,000, your soil is stable, and you want a clean, simple patio installed in 2 to 3 days. Choose pavers if your budget is $4,000 or more, your soil moves or freezes, and you want a patio that lasts 30 to 50 years and can be repaired one piece at a time. A 200 sq ft (18.6 sq m) concrete patio at $1,200 to $3,000 is the right call for a first home, a rental property, or a patio you will use for a few years before selling. A 200 sq ft (18.6 sq m) paver patio at $2,400 to $5,000 is the right call for a forever home, a patio that will carry a heavy outdoor kitchen or a hot tub, or a yard with clay soil that cracks concrete. If you are torn, a hybrid works: a concrete slab for the main patio with a paver border costs $8 to $12 per sq ft ($86 to $129 per sq m) and gives you the look of pavers at a price closer to concrete.
Before you decide, get three written quotes for both surfaces from local contractors, and make sure each quote lists the excavation depth, the base material and thickness, the drainage plan, and the warranty. A concrete quote should list the concrete strength, usually 4,000 psi, the control joint spacing, and the sealer. A paver quote should list the paver brand and thickness, the base depth, the edge restraint, and the polymeric sand. Ask each contractor how they handle drainage, because a patio that slopes toward the house will flood the basement in the first heavy rain: the patio must slope 1/4 inch per foot (2 cm per m) away from the house. If your project includes a driveway too, read the driveway materials guide before you choose, because the same concrete-versus-pavers math applies there, and a matching patio and driveway in the same material raises the curb appeal of the whole property.
Frequently asked questions
Yes, a concrete patio costs $6 to $15 per sq ft installed, while a paver patio costs $12 to $25 per sq ft installed, so pavers cost roughly twice as much up front. A 200 sq ft patio costs $1,200 to $3,000 in concrete and $2,400 to $5,000 in pavers. Over 30 years the gap narrows to 20 to 30 percent, because concrete repairs cost $500 to $1,500 per crack while paver repairs cost $100 to $300 to replace a few pavers.
Yes, a paver patio lasts 30 to 50 years, while a concrete patio lasts 25 to 30 years. Pavers flex with soil movement and freeze-thaw cycles, and individual pavers can be lifted and reset when they settle. Concrete is a single rigid slab, so soil movement cracks it permanently, and a cracked slab needs mudjacking at $500 to $1,500 or a full replacement at $6 to $15 per sq ft. On expansive clay soil, pavers are the safer long-term choice.
A paver patio needs the joints re-sanded with polymeric sand every 2 to 3 years, sealing every 3 to 5 years, and weeds pulled from the joints a few minutes a month. Re-sanding a 200 sq ft patio takes 1 to 2 hours and costs $20 to $40 in sand. Sealing costs $100 to $250 hired out or $40 to $80 do-it-yourself. Total maintenance costs $150 to $300 per year, slightly less than concrete, which costs $200 to $400 per year in resealing and crack repair.
Yes, you can install pavers over an existing concrete patio if the slab is structurally sound, with no cracks wider than 1/4 inch and no settling over 1/2 inch. The pavers are set in a 1 inch (2.5 cm) sand bed or glued directly to the concrete, which raises the patio height by 2 to 3 inches (5 to 8 cm) and needs a threshold adjustment at the door. If the slab is cracked or settled, remove it first, because the pavers will follow the cracks and settle in the same spots.
A paver patio adds slightly more home value than a concrete patio, because buyers see pavers as a premium surface and the patio looks better in listing photos. A well-built patio of either surface returns 50 to 80 percent of its cost at resale. The bigger value driver is the size and usability of the outdoor space, not the surface: a 300 sq ft patio with seating, shade, and lighting adds more value than a 150 sq ft paver patio with no furniture.
Keep reading
Patio Paver Installation: Base, Sand, Drainage and a Layout That Stays Level
How-ToExcavate 7 to 9 in deep and slope the patio 1/4 in per foot away from the house so it stays level for decades.
Read the articleDriveway Materials Guide: Asphalt, Concrete, Pavers and Gravel Compared Honestly
Tips & TricksAsphalt costs $3 to $5 per sq ft and lasts 20 to 30 years, concrete costs $6 to $12 and lasts 30 to 40, pavers cost $10 to $25 and last 40 years or more, and gravel costs $1 to $3 but needs regular upkeep — the best material depends on your climate, budget, and how long you will stay.
Read the article