(01) — Cost guide · Washington edition
Window Replacement Cost in Washington (2026)
In Washington, window replacement cost for the typical project costs about $7,750 — 8% above the national average of $7,200. The gap comes from labor: Washington labor runs at 1.22× the national average, and labor is about 35% of an installed price, so the state figure below scales the labor share only and leaves material prices at national levels. Read the national guide for the full breakdown, then use this page for the Washington numbers, city prices and code notes.
- $4,850
- low end in Washington — simple spec
- $7,750
- typical in Washington — most homeowners pay near this
- $12,900
- high end in Washington — premium materials, complex site
- $7,754.40
- installed for a 10-window vinyl replacement, Washington-adjusted
Typical project used for these figures: replacing 10 vinyl double-hung windows (pocket installation), installed, including removal and disposal of the old windows. Ranges are 2026 planning figures for a professional installation in Washington, derived from the national guide as explained below — always confirm with local quotes.
Washington prices vs the national average
Materials for this project are priced nationally — a bundle of shingles or a pallet of panels costs roughly the same anywhere in the country before delivery. Labor is what moves, and Washington labor sits at 1.22× the national average. Applying that index to the labor share (about 35% of the installed price) gives the Washington range below. If your quotes cluster well outside it, the difference is usually specification — material grade, code extras or site difficulty — not the labor market, and it is worth asking which line moved.
| Figure | National average | Washington | Difference |
|---|---|---|---|
| Low end | $4,500 | $4,850 | 8% above |
| Typical project | $7,200 | $7,750 | 8% above |
| High end | $12,000 | $12,900 | 8% above |
For the full national breakdown — what is included, what is billed separately, DIY vs pro, and what drives the price — read the national window replacement cost guide. The table below re-prices that same breakdown for Washington.
Cost breakdown, Washington-adjusted
The national guide's line items, with materials held at national prices and labor scaled by the Washington index of 1.22. Compare a real bid against this table line by line: if a contractor's labor lines run far above these figures, ask what is different about the job, and if the materials lines run far above, ask for the product grades.
| Line item | Materials | Labor (Washington) | Total |
|---|---|---|---|
| Windows — 10 vinyl double-hung, double-pane low-E argonStandard-size vinyl double-hung windows, double-pane with low-E coating and argon fill, U-factor 0.30, with screens and standard hardware | $4,000 | $0 | $4,000 |
| Installation labor — remove old, set, level, foam and sealRemove each old sash and frame insert, set the new window square and level, shim and fasten, fill the gap with low-expansion foam, and seal inside and out | $0 | $2,200 | $2,200 |
| Exterior trim and aluminum cappingWrap the exterior wood trim in bent aluminum coil stock, caulked and sealed, to protect it from weather and match the new window | $350 | $350 | $700 |
| Interior trim repair and caulkingRepair or replace interior casing and stool where the old window came out, fill and sand, and caulk the joint between trim and wall | $150 | $350 | $450 |
| Insulation, flashing tape and sealantLow-expansion foam around each unit, self-adhered flashing tape at the sill, and exterior-grade sealant at every joint | $100 | $100 | $200 |
| Permit and inspectionBuilding permit from the city or county where required, and the final inspection of the installation | $100 | $0 | $100 |
| Removal and disposal of the old windowsHaul away the old sashes and frames, and dispose of any lead-painted units under local rules | $0 | $100 | $100 |
| Total for the typical projectState-adjusted from the national breakdown above | $4,700 | $3,050 | $7,750 |
Typical cost by city in Washington
Labor markets differ within a state too. These city figures apply each city's multiplier to the Washington typical price for the same project — use them to sanity-check a quote from a specific metro, not as a bid. Rural areas outside these metros often land below the cheapest city shown, while resort and island markets can exceed the highest.
| City | Typical project cost |
|---|---|
| Spokane | $7,000 |
| Vancouver | $7,600 |
| Tacoma | $7,900 |
| Seattle | $8,550 |
| Bellevue | $8,700 |
Washington rules, climate and code that change the price
Washington pairs high labor costs with seismic code: the Seattle area sits in a high seismic design category, so decks, porches and remodels need hold-downs and lateral bracing that cheaper markets skip. The state energy code is among the strictest in the country, and western Washington's rain makes flashing, drainage and treated lumber specifications matter more than in dry climates. Frost depth is modest west of the Cascades (12–18 in) but deeper in the east.
Window Replacement Cost in Washington: what to watch
How much does window replacement cost in Washington? About $7,900 for replacing 10 vinyl double-hung windows — pocket installation, installed, including removal and disposal of the old windows — about 10% above the national typical of $7,200, with most Washington jobs landing between $4,950 and $13,200. Within the state, Bellevue runs about $8,850 and Seattle about $8,700, while Tacoma runs about $8,050 and Vancouver about $7,750 and Spokane about $7,100. Washington window work pairs high labor costs with seismic code: the Seattle area sits in a high seismic design category, so the structure around the window needs hold-downs and lateral bracing. The state energy code is among the strictest in the country, which makes U-factor and air sealing the numbers that matter. Western Washington's rain makes flashing, drainage and treated lumber matter more than in dry climates, and frost depth is modest west of the Cascades at 12–18 in but deeper in the east. Compare frame material, U-factor and pocket versus full-frame, because a window set out of square will leak air and water no matter how good the glass is.
What to ask contractors in Washington
Four questions that catch the expensive surprises on this project in this state. Get the answers in writing, on the quote, before you compare prices — two quotes are only comparable when they describe the same job.
- Permit: Washington cities and counties require permits for roofing, decks and structural work, with seismic detailing checked on decks and additions in the Puget Sound region. Energy-code compliance is reviewed on remodels and additions.
- Specification: Ask for the full material specification — grades, ratings and the code extras in the state notes above — not just a brand name and a total.
- Labor basis: Ask how the quote treats the Washington labor market: a quote far above the $7,750 typical figure should name the extra work, access problem or specification that justifies it.
- Local references: Ask for two recent jobs in your city, not just your state — city prices above vary by thousands, and a contractor working regularly in your metro knows its permit office and inspectors.
Frequently asked questions — Washington
Washington cities and counties require permits for roofing, decks and structural work, with seismic detailing checked on decks and additions in the Puget Sound region. Energy-code compliance is reviewed on remodels and additions.
Washington labor runs about 22% above the national average, with Seattle and Bellevue further above the state figure. Seismic hardware and strict energy-code detailing are the local adders.
Budget around $7,750 for the typical project (replacing 10 vinyl double-hung windows (pocket installation), installed, including removal and disposal of the old windows) in Washington, with most jobs landing between $4,850 and $12,900. That typical figure is 8% above the national typical of $7,200, because Washington labor runs at 1.22× the national average and labor is about 35% of the installed price. Get at least three local quotes before committing — the range above is a planning figure, not a bid.
Yes. Within Washington, the typical project runs from about $7,000 in Spokane to about $8,700 in Bellevue, reflecting local labor markets and, where applicable, stricter local code requirements. The city figures above are planning estimates from the state average, not quotes — a specific job's price depends on its specification, access and site conditions.
About $8,850 for replacing 10 vinyl double-hung windows — pocket installation, installed, including removal and disposal of the old windows — above the Washington typical of $7,900, with most Washington jobs landing between $4,950 and $13,200. Bellevue is the state's highest-cost window market, running above Seattle and priced by the Puget Sound labor market. The state energy code is among the strictest in the country, so U-factor and air sealing are the numbers to watch, and western Washington's rain makes flashing and drainage the details to check — compare frame material and pocket versus full-frame line by line.