(01) — Cost guide · Wisconsin edition
Roof Replacement Cost in Wisconsin (2026)
In Wisconsin, roof replacement cost for the typical project costs about $11,100 — 1% below the national average of $11,200. The gap comes from labor: Wisconsin labor runs at 0.98× the national average, and labor is about 45% of an installed price, so the state figure below scales the labor share only and leaves material prices at national levels. Read the national guide for the full breakdown, then use this page for the Wisconsin numbers, city prices and code notes.
- $5,950
- low end in Wisconsin — simple spec
- $11,100
- typical in Wisconsin — most homeowners pay near this
- $23,800
- high end in Wisconsin — premium materials, complex site
- $6.54
- per sq ft of roof area installed, typical architectural shingle job, Wisconsin-adjusted
Typical project used for these figures: a 1,700 sq ft roof (about 17 squares) in architectural asphalt shingles, one old layer torn off. Ranges are 2026 planning figures for a professional installation in Wisconsin, derived from the national guide as explained below — always confirm with local quotes.
Wisconsin prices vs the national average
Materials for this project are priced nationally — a bundle of shingles or a pallet of panels costs roughly the same anywhere in the country before delivery. Labor is what moves, and Wisconsin labor sits at 0.98× the national average. Applying that index to the labor share (about 45% of the installed price) gives the Wisconsin range below. If your quotes cluster well outside it, the difference is usually specification — material grade, code extras or site difficulty — not the labor market, and it is worth asking which line moved.
| Figure | National average | Wisconsin | Difference |
|---|---|---|---|
| Low end | $6,000 | $5,950 | 1% below |
| Typical project | $11,200 | $11,100 | 1% below |
| High end | $24,000 | $23,800 | 1% below |
For the full national breakdown — what is included, what is billed separately, DIY vs pro, and what drives the price — read the national roof replacement cost guide. The table below re-prices that same breakdown for Wisconsin.
Cost breakdown, Wisconsin-adjusted
The national guide's line items, with materials held at national prices and labor scaled by the Wisconsin index of 0.98. Compare a real bid against this table line by line: if a contractor's labor lines run far above these figures, ask what is different about the job, and if the materials lines run far above, ask for the product grades.
| Line item | Materials | Labor (Wisconsin) | Total |
|---|---|---|---|
| Tear-off & disposalOne existing layer stripped, hauled and dumped | $150 | $1,350 | $1,500 |
| Decking repair allowanceReplacing a handful of damaged sheets; priced per sheet in most contracts | $300 | $300 | $600 |
| Underlayment & ice-and-water shieldSynthetic underlayment over the field, membrane at eaves and valleys | $550 | $450 | $1,000 |
| Architectural shinglesAbout 17 squares including waste and starter courses | $3,300 | $2,550 | $5,850 |
| Flashing, vents & ridge capStep and chimney flashing, vent boots, ridge ventilation and cap | $450 | $550 | $1,000 |
| Drip edge, starter strip & fastenersMetal drip edge at eaves and rakes, nails and sealants | $300 | $200 | $500 |
| Permits, inspection & cleanupPermit where required, magnetic nail sweep, site cleanup | $350 | $300 | $650 |
| Total for the typical projectState-adjusted from the national breakdown above | $5,400 | $5,700 | $11,100 |
Typical cost by city in Wisconsin
Labor markets differ within a state too. These city figures apply each city's multiplier to the Wisconsin typical price for the same project — use them to sanity-check a quote from a specific metro, not as a bid. Rural areas outside these metros often land below the cheapest city shown, while resort and island markets can exceed the highest.
| City | Typical project cost |
|---|---|
| Green Bay | $10,450 |
| Appleton | $10,450 |
| Kenosha | $10,900 |
| Milwaukee | $11,300 |
| Madison | $11,300 |
Wisconsin rules, climate and code that change the price
Wisconsin enforces a statewide uniform dwelling code with local inspection, and its winters are the cost driver: frost depth is 48 in in the north and 42 in the south, snow loads are heavy, and freeze-thaw demands air-entrained concrete and careful drainage. Labor sits just below the national average, but deep footings and snow-load structure mean northern quotes carry groundwork costs that southern states never see.
Roof Replacement Cost in Wisconsin: what to watch
A typical 1,700 sq ft architectural shingle roof replacement in Wisconsin runs about $11,100, with most jobs landing between $5,950 and $23,800. Milwaukee and Madison run a little above the typical at about $11,300, while Green Bay and Appleton run about $10,450. Wisconsin roofing is a snow-load and ice-dam job: frost depth reaches 48 in in the north and 42 in in the south, snow loads are heavy statewide, and freeze-thaw cycles punish any weakness in flashing or ventilation. The practical consequence is that underlayment and ventilation carry more weight here than the shingle itself — ice-and-water shield at eaves and valleys, and balanced intake and exhaust ventilation, are what keep a new roof from damming in its first winter — and metal roofing, more popular here than in most states because it sheds snow and resists ice dams, is worth pricing alongside shingles. Check that the quote specifies shield coverage in feet from the eave and the ventilation balance, not just the shingle brand.
What to ask contractors in Wisconsin
Four questions that catch the expensive surprises on this project in this state. Get the answers in writing, on the quote, before you compare prices — two quotes are only comparable when they describe the same job.
- Permit: Wisconsin requires permits for roofing, decks and structural work under the uniform dwelling code, with footing-depth and snow-load checks standard on deck and porch permits.
- Specification: Ask for the full material specification — grades, ratings and the code extras in the state notes above — not just a brand name and a total.
- Labor basis: Ask how the quote treats the Wisconsin labor market: a quote far above the $11,100 typical figure should name the extra work, access problem or specification that justifies it.
- Local references: Ask for two recent jobs in your city, not just your state — city prices above vary by thousands, and a contractor working regularly in your metro knows its permit office and inspectors.
Frequently asked questions — Wisconsin
Wisconsin requires permits for roofing, decks and structural work under the uniform dwelling code, with footing-depth and snow-load checks standard on deck and porch permits.
Wisconsin labor runs about 2% below the national average, with Milwaukee and Madison slightly above the state figure. Deep frost footings and heavy snow-load structure are the local cost drivers.
Budget around $11,100 for the typical project (a 1,700 sq ft roof (about 17 squares) in architectural asphalt shingles, one old layer torn off) in Wisconsin, with most jobs landing between $5,950 and $23,800. That typical figure is 1% below the national typical of $11,200, because Wisconsin labor runs at 0.98× the national average and labor is about 45% of the installed price. Get at least three local quotes before committing — the range above is a planning figure, not a bid.
Yes. Within Wisconsin, the typical project runs from about $10,450 in Green Bay to about $11,300 in Madison, reflecting local labor markets and, where applicable, stricter local code requirements. The city figures above are planning estimates from the state average, not quotes — a specific job's price depends on its specification, access and site conditions.