(01) — Cost guide · Virginia edition

Roof Replacement Cost in Virginia (2026)

In Virginia, roof replacement cost for the typical project costs about $11,450 — 2% above the national average of $11,200. The gap comes from labor: Virginia labor runs at 1.05× the national average, and labor is about 45% of an installed price, so the state figure below scales the labor share only and leaves material prices at national levels. Read the national guide for the full breakdown, then use this page for the Virginia numbers, city prices and code notes.

$6,150
low end in Virginia — simple spec
$11,450
typical in Virginia — most homeowners pay near this
$24,550
high end in Virginia — premium materials, complex site
$6.75
per sq ft of roof area installed, typical architectural shingle job, Virginia-adjusted

Typical project used for these figures: a 1,700 sq ft roof (about 17 squares) in architectural asphalt shingles, one old layer torn off. Ranges are 2026 planning figures for a professional installation in Virginia, derived from the national guide as explained below — always confirm with local quotes.

Virginia prices vs the national average

Materials for this project are priced nationally — a bundle of shingles or a pallet of panels costs roughly the same anywhere in the country before delivery. Labor is what moves, and Virginia labor sits at 1.05× the national average. Applying that index to the labor share (about 45% of the installed price) gives the Virginia range below. If your quotes cluster well outside it, the difference is usually specification — material grade, code extras or site difficulty — not the labor market, and it is worth asking which line moved.

FigureNational averageVirginiaDifference
Low end$6,000$6,1502% above
Typical project$11,200$11,4502% above
High end$24,000$24,5502% above

For the full national breakdown — what is included, what is billed separately, DIY vs pro, and what drives the price — read the national roof replacement cost guide. The table below re-prices that same breakdown for Virginia.

Cost breakdown, Virginia-adjusted

The national guide's line items, with materials held at national prices and labor scaled by the Virginia index of 1.05. Compare a real bid against this table line by line: if a contractor's labor lines run far above these figures, ask what is different about the job, and if the materials lines run far above, ask for the product grades.

Line itemMaterialsLabor (Virginia)Total
Tear-off & disposalOne existing layer stripped, hauled and dumped $150 $1,450 $1,600
Decking repair allowanceReplacing a handful of damaged sheets; priced per sheet in most contracts $300 $300 $600
Underlayment & ice-and-water shieldSynthetic underlayment over the field, membrane at eaves and valleys $550 $450 $1,000
Architectural shinglesAbout 17 squares including waste and starter courses $3,300 $2,750 $6,050
Flashing, vents & ridge capStep and chimney flashing, vent boots, ridge ventilation and cap $450 $600 $1,050
Drip edge, starter strip & fastenersMetal drip edge at eaves and rakes, nails and sealants $300 $200 $500
Permits, inspection & cleanupPermit where required, magnetic nail sweep, site cleanup $350 $300 $650
Total for the typical projectState-adjusted from the national breakdown above $5,400 $6,100 $11,500

Typical cost by city in Virginia

Labor markets differ within a state too. These city figures apply each city's multiplier to the Virginia typical price for the same project — use them to sanity-check a quote from a specific metro, not as a bid. Rural areas outside these metros often land below the cheapest city shown, while resort and island markets can exceed the highest.

CityTypical project cost
Richmond$11,000
Norfolk$11,200
Virginia Beach$11,450
Alexandria$12,600
Arlington$12,850

Virginia rules, climate and code that change the price

Virginia's costs split between the Washington DC suburbs — Arlington and Alexandria run well above the state figure — and the rest of the state, which is near average. The statewide residential code applies with local enforcement; frost depth is 18–24 in in the north and less in the Tidewater, where hurricane wind and flood-zone rules govern coastal work. Termite protection is standard practice statewide.

Roof Replacement Cost in Virginia: what to watch

How much does a roof replacement cost in Virginia? About $11,450 for a 1,700 sq ft architectural shingle roof — just above the national typical of $11,200, with most Virginia jobs landing between $6,150 and $24,550. Arlington runs about $12,800, while Richmond runs about $11,000. Virginia's costs split between the Washington DC suburbs — Arlington and Alexandria run well above the state figure — and the rest of the state, which is near average. The statewide residential code applies with local enforcement; frost depth is 18–24 in in the north and less in the Tidewater, where hurricane wind and flood-zone rules govern coastal work. Termite protection is standard practice statewide. Get the underlayment and ventilation specifications in writing.

What to ask contractors in Virginia

Four questions that catch the expensive surprises on this project in this state. Get the answers in writing, on the quote, before you compare prices — two quotes are only comparable when they describe the same job.

  • Permit: Virginia counties require permits for roofing, decks and structural work. In Tidewater flood zones, elevation and flood-vent rules can affect ground-level structures and must be checked before a deck or addition is designed.
  • Specification: Ask for the full material specification — grades, ratings and the code extras in the state notes above — not just a brand name and a total.
  • Labor basis: Ask how the quote treats the Virginia labor market: a quote far above the $11,450 typical figure should name the extra work, access problem or specification that justifies it.
  • Local references: Ask for two recent jobs in your city, not just your state — city prices above vary by thousands, and a contractor working regularly in your metro knows its permit office and inspectors.

Frequently asked questions — Virginia

How to read these numbers. Last updated October 2026 · Virginia figures are derived from the national guide by scaling the labor share (about 45% of the installed price) by the Virginia labor index of 1.05; materials are held at national prices. State indices are planning-grade figures compiled from published regional cost data, not contractor quotes. Always confirm with local quotes; your quote will vary.