(01) — Cost guide · Tennessee edition
Roof Replacement Cost in Tennessee (2026)
In Tennessee, roof replacement cost for the typical project costs about $10,700 — 4% below the national average of $11,200. The gap comes from labor: Tennessee labor runs at 0.9× the national average, and labor is about 45% of an installed price, so the state figure below scales the labor share only and leaves material prices at national levels. Read the national guide for the full breakdown, then use this page for the Tennessee numbers, city prices and code notes.
- $5,750
- low end in Tennessee — simple spec
- $10,700
- typical in Tennessee — most homeowners pay near this
- $22,900
- high end in Tennessee — premium materials, complex site
- $6.30
- per sq ft of roof area installed, typical architectural shingle job, Tennessee-adjusted
Typical project used for these figures: a 1,700 sq ft roof (about 17 squares) in architectural asphalt shingles, one old layer torn off. Ranges are 2026 planning figures for a professional installation in Tennessee, derived from the national guide as explained below — always confirm with local quotes.
Tennessee prices vs the national average
Materials for this project are priced nationally — a bundle of shingles or a pallet of panels costs roughly the same anywhere in the country before delivery. Labor is what moves, and Tennessee labor sits at 0.9× the national average. Applying that index to the labor share (about 45% of the installed price) gives the Tennessee range below. If your quotes cluster well outside it, the difference is usually specification — material grade, code extras or site difficulty — not the labor market, and it is worth asking which line moved.
| Figure | National average | Tennessee | Difference |
|---|---|---|---|
| Low end | $6,000 | $5,750 | 4% below |
| Typical project | $11,200 | $10,700 | 4% below |
| High end | $24,000 | $22,900 | 4% below |
For the full national breakdown — what is included, what is billed separately, DIY vs pro, and what drives the price — read the national roof replacement cost guide. The table below re-prices that same breakdown for Tennessee.
Cost breakdown, Tennessee-adjusted
The national guide's line items, with materials held at national prices and labor scaled by the Tennessee index of 0.9. Compare a real bid against this table line by line: if a contractor's labor lines run far above these figures, ask what is different about the job, and if the materials lines run far above, ask for the product grades.
| Line item | Materials | Labor (Tennessee) | Total |
|---|---|---|---|
| Tear-off & disposalOne existing layer stripped, hauled and dumped | $150 | $1,250 | $1,400 |
| Decking repair allowanceReplacing a handful of damaged sheets; priced per sheet in most contracts | $300 | $250 | $550 |
| Underlayment & ice-and-water shieldSynthetic underlayment over the field, membrane at eaves and valleys | $550 | $400 | $950 |
| Architectural shinglesAbout 17 squares including waste and starter courses | $3,300 | $2,350 | $5,650 |
| Flashing, vents & ridge capStep and chimney flashing, vent boots, ridge ventilation and cap | $450 | $500 | $950 |
| Drip edge, starter strip & fastenersMetal drip edge at eaves and rakes, nails and sealants | $300 | $200 | $500 |
| Permits, inspection & cleanupPermit where required, magnetic nail sweep, site cleanup | $350 | $250 | $600 |
| Total for the typical projectState-adjusted from the national breakdown above | $5,400 | $5,200 | $10,600 |
Typical cost by city in Tennessee
Labor markets differ within a state too. These city figures apply each city's multiplier to the Tennessee typical price for the same project — use them to sanity-check a quote from a specific metro, not as a bid. Rural areas outside these metros often land below the cheapest city shown, while resort and island markets can exceed the highest.
| City | Typical project cost |
|---|---|
| Clarksville | $10,050 |
| Memphis | $10,250 |
| Knoxville | $10,250 |
| Chattanooga | $10,250 |
| Nashville | $11,100 |
Tennessee rules, climate and code that change the price
Tennessee is a low-cost labor market with a statewide residential code and local enforcement that varies in thoroughness; Nashville is the state's higher-cost metro. Frost depth is 12–18 in, seismic risk is real in the Memphis area (New Madrid zone) though rarely priced into residential quotes, and humidity and termite pressure make treated lumber and ventilation standard practice. Tornado and severe-storm exposure affects roofing specifications in the middle of the state.
Roof Replacement Cost in Tennessee: what to watch
A typical 1,700 sq ft architectural shingle roof replacement in Tennessee runs about $10,700, with most jobs landing between $5,750 and $22,900. Within the state, Nashville runs a little above the typical at about $11,100, while Memphis, Knoxville and Chattanooga run about $10,250. Tennessee roofing is a storm story: tornado and severe-thunderstorm exposure across the middle of the state makes storm-rated shingles and proper nailing a routine upgrade rather than an optional extra, and the Memphis area sits in the New Madrid seismic zone, though that rarely changes a residential roofing quote. Humidity is the second factor — a poorly ventilated Tennessee attic traps moisture and cooks shingles from below, so the ventilation plan matters as much as the shingle brand; permits come through local building departments under the statewide residential code, with Nashville enforcing most thoroughly. Ask for the storm rating, the sealed-deck detail and the ventilation calculation in writing, because a Tennessee quote that omits them is not comparable to one that includes them.
What to ask contractors in Tennessee
Four questions that catch the expensive surprises on this project in this state. Get the answers in writing, on the quote, before you compare prices — two quotes are only comparable when they describe the same job.
- Permit: Tennessee requires permits for roofing, decks and structural work through local building departments. Nashville and the larger cities enforce most thoroughly; smaller jurisdictions may be lighter but still require permits for structural work.
- Specification: Ask for the full material specification — grades, ratings and the code extras in the state notes above — not just a brand name and a total.
- Labor basis: Ask how the quote treats the Tennessee labor market: a quote far above the $10,700 typical figure should name the extra work, access problem or specification that justifies it.
- Local references: Ask for two recent jobs in your city, not just your state — city prices above vary by thousands, and a contractor working regularly in your metro knows its permit office and inspectors.
Frequently asked questions — Tennessee
Tennessee requires permits for roofing, decks and structural work through local building departments. Nashville and the larger cities enforce most thoroughly; smaller jurisdictions may be lighter but still require permits for structural work.
Tennessee labor runs about 10% below the national average, with Nashville roughly 4% above the state figure. Shallow footings keep groundwork cheap; storm-rated roofing is the main local extra.
Budget around $10,700 for the typical project (a 1,700 sq ft roof (about 17 squares) in architectural asphalt shingles, one old layer torn off) in Tennessee, with most jobs landing between $5,750 and $22,900. That typical figure is 4% below the national typical of $11,200, because Tennessee labor runs at 0.9× the national average and labor is about 45% of the installed price. Get at least three local quotes before committing — the range above is a planning figure, not a bid.
Yes. Within Tennessee, the typical project runs from about $10,050 in Clarksville to about $11,100 in Nashville, reflecting local labor markets and, where applicable, stricter local code requirements. The city figures above are planning estimates from the state average, not quotes — a specific job's price depends on its specification, access and site conditions.