(01) — Cost guide · Oklahoma edition

Roof Replacement Cost in Oklahoma (2026)

In Oklahoma, roof replacement cost for the typical project costs about $10,600 — 5% below the national average of $11,200. The gap comes from labor: Oklahoma labor runs at 0.88× the national average, and labor is about 45% of an installed price, so the state figure below scales the labor share only and leaves material prices at national levels. Read the national guide for the full breakdown, then use this page for the Oklahoma numbers, city prices and code notes.

$5,700
low end in Oklahoma — simple spec
$10,600
typical in Oklahoma — most homeowners pay near this
$22,700
high end in Oklahoma — premium materials, complex site
$6.24
per sq ft of roof area installed, typical architectural shingle job, Oklahoma-adjusted

Typical project used for these figures: a 1,700 sq ft roof (about 17 squares) in architectural asphalt shingles, one old layer torn off. Ranges are 2026 planning figures for a professional installation in Oklahoma, derived from the national guide as explained below — always confirm with local quotes.

Oklahoma prices vs the national average

Materials for this project are priced nationally — a bundle of shingles or a pallet of panels costs roughly the same anywhere in the country before delivery. Labor is what moves, and Oklahoma labor sits at 0.88× the national average. Applying that index to the labor share (about 45% of the installed price) gives the Oklahoma range below. If your quotes cluster well outside it, the difference is usually specification — material grade, code extras or site difficulty — not the labor market, and it is worth asking which line moved.

FigureNational averageOklahomaDifference
Low end$6,000$5,7005% below
Typical project$11,200$10,6005% below
High end$24,000$22,7005% below

For the full national breakdown — what is included, what is billed separately, DIY vs pro, and what drives the price — read the national roof replacement cost guide. The table below re-prices that same breakdown for Oklahoma.

Cost breakdown, Oklahoma-adjusted

The national guide's line items, with materials held at national prices and labor scaled by the Oklahoma index of 0.88. Compare a real bid against this table line by line: if a contractor's labor lines run far above these figures, ask what is different about the job, and if the materials lines run far above, ask for the product grades.

Line itemMaterialsLabor (Oklahoma)Total
Tear-off & disposalOne existing layer stripped, hauled and dumped $150 $1,250 $1,400
Decking repair allowanceReplacing a handful of damaged sheets; priced per sheet in most contracts $300 $250 $550
Underlayment & ice-and-water shieldSynthetic underlayment over the field, membrane at eaves and valleys $550 $400 $950
Architectural shinglesAbout 17 squares including waste and starter courses $3,300 $2,300 $5,600
Flashing, vents & ridge capStep and chimney flashing, vent boots, ridge ventilation and cap $450 $500 $950
Drip edge, starter strip & fastenersMetal drip edge at eaves and rakes, nails and sealants $300 $200 $500
Permits, inspection & cleanupPermit where required, magnetic nail sweep, site cleanup $350 $250 $600
Total for the typical projectState-adjusted from the national breakdown above $5,400 $5,100 $10,500

Typical cost by city in Oklahoma

Labor markets differ within a state too. These city figures apply each city's multiplier to the Oklahoma typical price for the same project — use them to sanity-check a quote from a specific metro, not as a bid. Rural areas outside these metros often land below the cheapest city shown, while resort and island markets can exceed the highest.

CityTypical project cost
Norman$10,400
Broken Arrow$10,400
Oklahoma City$10,600
Tulsa$10,600
Edmond$10,800

Oklahoma rules, climate and code that change the price

Oklahoma is a low-cost labor market in the heart of Tornado Alley, so storm-rated roofing and wind-resistant connections are the dominant local specification — impact-resistant shingles and enhanced nailing are common and often insurance-driven. The state has no statewide residential code; cities adopt their own, with Oklahoma City and Tulsa the most thorough. Expansive clay soils in central Oklahoma affect footings, and frost depth is about 18 in.

Roof Replacement Cost in Oklahoma: what to watch

How much does a roof replacement cost in Oklahoma? About $10,600 for a typical 1,700 sq ft architectural shingle roof, with most Oklahoma jobs landing between $5,700 and $22,700. Oklahoma sits in the heart of Tornado Alley, so storm-rated roofing is the dominant local specification: impact-resistant (Class 4) shingles and enhanced nailing patterns are common and often insurance-driven, and Oklahoma City and Tulsa routinely check storm-rated specifications on re-roof permits. Labor is among the lowest in the country and even across the state's cities, which keeps the typical below the national $11,200 despite the upgraded materials. The state has no statewide residential code — cities adopt their own, with Oklahoma City and Tulsa the most thorough — and frost depth is about 18 in. Get the hail rating and the nailing pattern in writing, because an Oklahoma quote that omits them is not comparable to one that includes them.

What to ask contractors in Oklahoma

Four questions that catch the expensive surprises on this project in this state. Get the answers in writing, on the quote, before you compare prices — two quotes are only comparable when they describe the same job.

  • Permit: Oklahoma cities require permits for roofing, decks and structural work under locally adopted codes, with Oklahoma City and Tulsa the most thorough. Storm-rated roofing specifications are routinely checked on re-roof permits.
  • Specification: Ask for the full material specification — grades, ratings and the code extras in the state notes above — not just a brand name and a total.
  • Labor basis: Ask how the quote treats the Oklahoma labor market: a quote far above the $10,600 typical figure should name the extra work, access problem or specification that justifies it.
  • Local references: Ask for two recent jobs in your city, not just your state — city prices above vary by thousands, and a contractor working regularly in your metro knows its permit office and inspectors.

Frequently asked questions — Oklahoma

How to read these numbers. Last updated October 2026 · Oklahoma figures are derived from the national guide by scaling the labor share (about 45% of the installed price) by the Oklahoma labor index of 0.88; materials are held at national prices. State indices are planning-grade figures compiled from published regional cost data, not contractor quotes. Always confirm with local quotes; your quote will vary.