(01) — Cost guide · Arizona edition

Roof Replacement Cost in Arizona (2026)

In Arizona, roof replacement cost for the typical project costs about $11,200 — 0% above the national average of $11,200. The gap comes from labor: Arizona labor runs at 1× the national average, and labor is about 45% of an installed price, so the state figure below scales the labor share only and leaves material prices at national levels. Read the national guide for the full breakdown, then use this page for the Arizona numbers, city prices and code notes.

$6,000
low end in Arizona — simple spec
$11,200
typical in Arizona — most homeowners pay near this
$24,000
high end in Arizona — premium materials, complex site
$6.60
per sq ft of roof area installed, typical architectural shingle job, Arizona-adjusted

Typical project used for these figures: a 1,700 sq ft roof (about 17 squares) in architectural asphalt shingles, one old layer torn off. Ranges are 2026 planning figures for a professional installation in Arizona, derived from the national guide as explained below — always confirm with local quotes.

Arizona prices vs the national average

Materials for this project are priced nationally — a bundle of shingles or a pallet of panels costs roughly the same anywhere in the country before delivery. Labor is what moves, and Arizona labor sits at 1× the national average. Applying that index to the labor share (about 45% of the installed price) gives the Arizona range below. If your quotes cluster well outside it, the difference is usually specification — material grade, code extras or site difficulty — not the labor market, and it is worth asking which line moved.

FigureNational averageArizonaDifference
Low end$6,000$6,0000% above
Typical project$11,200$11,2000% above
High end$24,000$24,0000% above

For the full national breakdown — what is included, what is billed separately, DIY vs pro, and what drives the price — read the national roof replacement cost guide. The table below re-prices that same breakdown for Arizona.

Cost breakdown, Arizona-adjusted

The national guide's line items, with materials held at national prices and labor scaled by the Arizona index of 1. Compare a real bid against this table line by line: if a contractor's labor lines run far above these figures, ask what is different about the job, and if the materials lines run far above, ask for the product grades.

Line itemMaterialsLabor (Arizona)Total
Tear-off & disposalOne existing layer stripped, hauled and dumped $150 $1,400 $1,550
Decking repair allowanceReplacing a handful of damaged sheets; priced per sheet in most contracts $300 $300 $600
Underlayment & ice-and-water shieldSynthetic underlayment over the field, membrane at eaves and valleys $550 $450 $1,000
Architectural shinglesAbout 17 squares including waste and starter courses $3,300 $2,600 $5,900
Flashing, vents & ridge capStep and chimney flashing, vent boots, ridge ventilation and cap $450 $550 $1,000
Drip edge, starter strip & fastenersMetal drip edge at eaves and rakes, nails and sealants $300 $200 $500
Permits, inspection & cleanupPermit where required, magnetic nail sweep, site cleanup $350 $300 $650
Total for the typical projectState-adjusted from the national breakdown above $5,400 $5,800 $11,200

Typical cost by city in Arizona

Labor markets differ within a state too. These city figures apply each city's multiplier to the Arizona typical price for the same project — use them to sanity-check a quote from a specific metro, not as a bid. Rural areas outside these metros often land below the cheapest city shown, while resort and island markets can exceed the highest.

CityTypical project cost
Tucson$10,750
Mesa$11,000
Phoenix$11,200
Chandler$11,200
Scottsdale$11,850

Arizona rules, climate and code that change the price

Arizona is a near-average labor market where the cost drivers are heat and soil: expansive soils in the Phoenix basin crack slabs and shift fence posts unless footings are designed for them, and intense UV and heat age roofing and decking faster than in mild climates. Frost is negligible in the desert metros but real in Flagstaff and the high country. The state has no statewide residential code; cities adopt their own, with Phoenix-area jurisdictions the most thorough.

Roof Replacement Cost in Arizona: what to watch

How much does a roof replacement cost in Arizona? About $11,200 for a 1,700 sq ft architectural shingle roof — at the national typical, with most Arizona jobs landing between $6,000 and $24,000. Scottsdale runs about $11,850, while Tucson runs about $10,750. Arizona roofing is a heat and UV job: intense sun and heat age shingles faster than in mild climates, and tile — common across the state — costs more to install but lasts far longer under the desert sun. Expansive soils in the Phoenix basin matter for the structure the roof sits on, and frost is negligible in the desert metros but real in Flagstaff and the high country. The state has no statewide residential code; cities adopt their own, with Phoenix-area jurisdictions the most thorough. Lighter colors and proper attic ventilation pay back in shingle life.

What to ask contractors in Arizona

Four questions that catch the expensive surprises on this project in this state. Get the answers in writing, on the quote, before you compare prices — two quotes are only comparable when they describe the same job.

  • Permit: Arizona cities require permits for roofing, decks and structural work under locally adopted codes. In the Phoenix basin, expansive-soil footing design is the item permit reviewers look at most closely for ground-level structures.
  • Specification: Ask for the full material specification — grades, ratings and the code extras in the state notes above — not just a brand name and a total.
  • Labor basis: Ask how the quote treats the Arizona labor market: a quote far above the $11,200 typical figure should name the extra work, access problem or specification that justifies it.
  • Local references: Ask for two recent jobs in your city, not just your state — city prices above vary by thousands, and a contractor working regularly in your metro knows its permit office and inspectors.

Frequently asked questions — Arizona

How to read these numbers. Last updated October 2026 · Arizona figures are derived from the national guide by scaling the labor share (about 45% of the installed price) by the Arizona labor index of 1; materials are held at national prices. State indices are planning-grade figures compiled from published regional cost data, not contractor quotes. Always confirm with local quotes; your quote will vary.