(01) — Cost guide · Alabama edition
Roof Replacement Cost in Alabama (2026)
In Alabama, roof replacement cost for the typical project costs about $10,500 — 6% below the national average of $11,200. The gap comes from labor: Alabama labor runs at 0.86× the national average, and labor is about 45% of an installed price, so the state figure below scales the labor share only and leaves material prices at national levels. Read the national guide for the full breakdown, then use this page for the Alabama numbers, city prices and code notes.
- $5,600
- low end in Alabama — simple spec
- $10,500
- typical in Alabama — most homeowners pay near this
- $22,500
- high end in Alabama — premium materials, complex site
- $6.18
- per sq ft of roof area installed, typical architectural shingle job, Alabama-adjusted
Typical project used for these figures: a 1,700 sq ft roof (about 17 squares) in architectural asphalt shingles, one old layer torn off. Ranges are 2026 planning figures for a professional installation in Alabama, derived from the national guide as explained below — always confirm with local quotes.
Alabama prices vs the national average
Materials for this project are priced nationally — a bundle of shingles or a pallet of panels costs roughly the same anywhere in the country before delivery. Labor is what moves, and Alabama labor sits at 0.86× the national average. Applying that index to the labor share (about 45% of the installed price) gives the Alabama range below. If your quotes cluster well outside it, the difference is usually specification — material grade, code extras or site difficulty — not the labor market, and it is worth asking which line moved.
| Figure | National average | Alabama | Difference |
|---|---|---|---|
| Low end | $6,000 | $5,600 | 6% below |
| Typical project | $11,200 | $10,500 | 6% below |
| High end | $24,000 | $22,500 | 6% below |
For the full national breakdown — what is included, what is billed separately, DIY vs pro, and what drives the price — read the national roof replacement cost guide. The table below re-prices that same breakdown for Alabama.
Cost breakdown, Alabama-adjusted
The national guide's line items, with materials held at national prices and labor scaled by the Alabama index of 0.86. Compare a real bid against this table line by line: if a contractor's labor lines run far above these figures, ask what is different about the job, and if the materials lines run far above, ask for the product grades.
| Line item | Materials | Labor (Alabama) | Total |
|---|---|---|---|
| Tear-off & disposalOne existing layer stripped, hauled and dumped | $150 | $1,200 | $1,350 |
| Decking repair allowanceReplacing a handful of damaged sheets; priced per sheet in most contracts | $300 | $250 | $550 |
| Underlayment & ice-and-water shieldSynthetic underlayment over the field, membrane at eaves and valleys | $550 | $400 | $950 |
| Architectural shinglesAbout 17 squares including waste and starter courses | $3,300 | $2,250 | $5,550 |
| Flashing, vents & ridge capStep and chimney flashing, vent boots, ridge ventilation and cap | $450 | $450 | $900 |
| Drip edge, starter strip & fastenersMetal drip edge at eaves and rakes, nails and sealants | $300 | $150 | $450 |
| Permits, inspection & cleanupPermit where required, magnetic nail sweep, site cleanup | $350 | $250 | $600 |
| Total for the typical projectState-adjusted from the national breakdown above | $5,400 | $5,000 | $10,400 |
Typical cost by city in Alabama
Labor markets differ within a state too. These city figures apply each city's multiplier to the Alabama typical price for the same project — use them to sanity-check a quote from a specific metro, not as a bid. Rural areas outside these metros often land below the cheapest city shown, while resort and island markets can exceed the highest.
| City | Typical project cost |
|---|---|
| Montgomery | $10,050 |
| Tuscaloosa | $10,050 |
| Mobile | $10,300 |
| Birmingham | $10,500 |
| Huntsville | $10,500 |
Alabama rules, climate and code that change the price
Alabama is one of the lowest-cost labor markets in the program, but it has no statewide residential building code — adoption is local, so permit practice ranges from thorough in Birmingham and Huntsville to minimal in rural counties. Frost is negligible, tornado and hurricane exposure in the south and Gulf Coast makes storm-rated roofing a common upgrade, and termite protection is standard statewide.
Roof Replacement Cost in Alabama: what to watch
How much does a roof replacement cost in Alabama? About $10,500 for a typical 1,700 sq ft architectural shingle roof, with most Alabama jobs landing between $5,600 and $22,500. Alabama is one of the lowest-cost labor markets in the country, which is why the typical sits well below the national $11,200. The price driver here is storms, not snow: tornado exposure statewide and hurricane exposure along the Gulf Coast make storm-rated roofing a common upgrade, and impact-resistant shingles are often an insurance conversation rather than a luxury. Alabama has no statewide residential building code, so permit practice varies — thorough in Birmingham and Huntsville, minimal in some rural counties — and frost is negligible, so deep footings and ice dams are not part of the roofing bill. Ask whether the quote includes a storm rating and how the permit will be handled for your county, because a quote that skips both is not comparable to one that covers them.
What to ask contractors in Alabama
Four questions that catch the expensive surprises on this project in this state. Get the answers in writing, on the quote, before you compare prices — two quotes are only comparable when they describe the same job.
- Permit: Alabama leaves code adoption to local jurisdictions, so permit requirements vary: Birmingham, Huntsville and Mobile enforce thoroughly, while some rural counties require little for residential work. Check the city or county for your address.
- Specification: Ask for the full material specification — grades, ratings and the code extras in the state notes above — not just a brand name and a total.
- Labor basis: Ask how the quote treats the Alabama labor market: a quote far above the $10,500 typical figure should name the extra work, access problem or specification that justifies it.
- Local references: Ask for two recent jobs in your city, not just your state — city prices above vary by thousands, and a contractor working regularly in your metro knows its permit office and inspectors.
Frequently asked questions — Alabama
Alabama leaves code adoption to local jurisdictions, so permit requirements vary: Birmingham, Huntsville and Mobile enforce thoroughly, while some rural counties require little for residential work. Check the city or county for your address.
Alabama labor runs about 14% below the national average and is even across its cities. Storm-rated roofing and termite protection are the local extras; shallow footings keep groundwork cheap.
Budget around $10,500 for the typical project (a 1,700 sq ft roof (about 17 squares) in architectural asphalt shingles, one old layer torn off) in Alabama, with most jobs landing between $5,600 and $22,500. That typical figure is 6% below the national typical of $11,200, because Alabama labor runs at 0.86× the national average and labor is about 45% of the installed price. Get at least three local quotes before committing — the range above is a planning figure, not a bid.
Yes. Within Alabama, the typical project runs from about $10,050 in Montgomery to about $10,500 in Huntsville, reflecting local labor markets and, where applicable, stricter local code requirements. The city figures above are planning estimates from the state average, not quotes — a specific job's price depends on its specification, access and site conditions.