(01) — Cost guide · Illinois edition

Kitchen Remodel Cost in Illinois (2026)

In Illinois, kitchen remodel cost for the typical project costs about $28,500 — 4% above the national average of $27,500. The gap comes from labour: Illinois labour runs at 1.08× the national average, and labour is about 45% of an installed price, so the state figure below scales the labour share only and leaves material prices at national levels. Read the national guide for the full breakdown, then use this page for the Illinois numbers, city prices and code notes.

$8,300
low end in Illinois — simple spec
$28,500
typical in Illinois — most homeowners pay near this
$82,900
high end in Illinois — premium materials, complex site
$238.28
per sq ft of floor area, typical minor mid-range remodel, Illinois-adjusted

Typical project used for these figures: a minor mid-range remodel of a 10 × 12 ft kitchen — new semi-custom cabinets in the same layout, quartz counters, mid-range appliances. Ranges are 2026 planning figures for a professional installation in Illinois, derived from the national guide as explained below — always confirm with local quotes.

Illinois prices vs the national average

Materials for this project are priced nationally — a bundle of shingles or a pallet of panels costs roughly the same anywhere in the country before delivery. Labour is what moves, and Illinois labour sits at 1.08× the national average. Applying that index to the labour share (about 45% of the installed price) gives the Illinois range below. If your quotes cluster well outside it, the difference is usually specification — material grade, code extras or site difficulty — not the labour market, and it is worth asking which line moved.

FigureNational averageIllinoisDifference
Low end$8,000$8,3004% above
Typical project$27,500$28,5004% above
High end$80,000$82,9004% above

For the full national breakdown — what is included, what is billed separately, DIY vs pro, and what drives the price — read the national kitchen remodel cost guide. The table below re-prices that same breakdown for Illinois.

Cost breakdown, Illinois-adjusted

The national guide's line items, with materials held at national prices and labour scaled by the Illinois index of 1.08. Compare a real bid against this table line by line: if a contractor's labour lines run far above these figures, ask what is different about the job, and if the materials lines run far above, ask for the product grades.

Line itemMaterialsLabour (Illinois)Total
CabinetsSemi-custom, installed and levelled; about 35% of the whole budget $8,000 $1,850 $9,850
CountertopsQuartz, about 35 sq ft including the sink cutout and edge profile $2,600 $950 $3,550
AppliancesMid-range suite: range, refrigerator, dishwasher, microwave $4,500 $450 $4,950
FlooringLuxury vinyl or mid-range hardwood over the 120 sq ft floor $900 $850 $1,750
BacksplashSubway or similar tile, about 30 sq ft, set and grouted $550 $700 $1,250
Plumbing & electricalReconnect in place, code upgrades, under-cabinet lighting circuits $800 $1,850 $2,650
Sink, faucet & hardwareUndermount sink, pull-down faucet, cabinet pulls $700 $300 $1,000
LightingRecessed and under-cabinet fixtures, dimmers $500 $550 $1,050
Paint & finishingWalls and ceiling, trim touch-ups $350 $700 $1,050
Demolition, permits & disposalStrip-out of the old kitchen, permit where required, dump fees $200 $850 $1,050
Total for the typical projectState-adjusted from the national breakdown above $19,100 $9,050 $28,150

Typical cost by city in Illinois

Labour markets differ within a state too. These city figures apply each city's multiplier to the Illinois typical price for the same project — use them to sanity-check a quote from a specific metro, not as a bid. Rural areas outside these metros often land below the cheapest city shown, while resort and island markets can exceed the highest.

CityTypical project cost
Springfield$25,650
Peoria$25,650
Rockford$26,200
Aurora$29,050
Naperville$30,200
Chicago$31,350

Illinois rules, climate and code that change the price

Illinois has no statewide residential building code — municipalities adopt their own, and Chicago runs its own comprehensive building code, which is why Chicago-area prices run well above downstate. Frost depth is 36–42 in across northern Illinois, and freeze-thaw cycles punish shallow footings and poorly drained bases. Chicago and its suburbs add strict permit, inspection and contractor-registration requirements; many smaller towns are lighter-touch but still require permits for structural work.

Kitchen Remodel Cost in Illinois: what to watch

Illinois kitchen remodels are Chicago-code jobs in the metro and older-stock jobs everywhere else. Chicago has its own building code with filing and inspection steps that suburban and downstate jobs do not face, and condo and co-op buildings add board approvals, restricted work hours and elevator bookings that stretch timelines. Much of the Chicago-area housing stock predates 1978, so lead paint and older wiring or galvanised plumbing surface once walls are open, and northern Illinois winters argue for scheduling demolition and rough-in outside the coldest weeks. Keep the sink and range where they are if the budget matters: moving plumbing in a masonry or plaster-wall home is the fastest way to double the rough-in bill.

What to ask contractors in Illinois

Four questions that catch the expensive surprises on this project in this state. Get the answers in writing, on the quote, before you compare prices — two quotes are only comparable when they describe the same job.

  • Permit: Illinois leaves code adoption to municipalities, so permit rules vary: Chicago and its suburbs are strict and thorough, while smaller towns may be lighter but still require permits for decks, roofing and structural work. Always check the municipality, not the state, for the rule that applies to your address.
  • Specification: Ask for the full material specification — grades, ratings and the code extras in the state notes above — not just a brand name and a total.
  • Labour basis: Ask how the quote treats the Illinois labour market: a quote far above the $28,500 typical figure should name the extra work, access problem or specification that justifies it.
  • Local references: Ask for two recent jobs in your city, not just your state — city prices above vary by thousands, and a contractor working regularly in your metro knows its permit office and inspectors.

Frequently asked questions — Illinois

How to read these numbers. Last updated October 2026 · Illinois figures are derived from the national guide by scaling the labour share (about 45% of the installed price) by the Illinois labour index of 1.08; materials are held at national prices. State indices are planning-grade figures compiled from published regional cost data, not contractor quotes. Always confirm with local quotes; your quote will vary.