(01) — Cost guide · Florida edition
Kitchen Remodel Cost in Florida (2026)
In Florida, kitchen remodel cost for the typical project costs about $27,750 — 1% above the national average of $27,500. The gap comes from labour: Florida labour runs at 1.02× the national average, and labour is about 45% of an installed price, so the state figure below scales the labour share only and leaves material prices at national levels. Read the national guide for the full breakdown, then use this page for the Florida numbers, city prices and code notes.
- $8,050
- low end in Florida — simple spec
- $27,750
- typical in Florida — most homeowners pay near this
- $80,700
- high end in Florida — premium materials, complex site
- $232.07
- per sq ft of floor area, typical minor mid-range remodel, Florida-adjusted
Typical project used for these figures: a minor mid-range remodel of a 10 × 12 ft kitchen — new semi-custom cabinets in the same layout, quartz counters, mid-range appliances. Ranges are 2026 planning figures for a professional installation in Florida, derived from the national guide as explained below — always confirm with local quotes.
Florida prices vs the national average
Materials for this project are priced nationally — a bundle of shingles or a pallet of panels costs roughly the same anywhere in the country before delivery. Labour is what moves, and Florida labour sits at 1.02× the national average. Applying that index to the labour share (about 45% of the installed price) gives the Florida range below. If your quotes cluster well outside it, the difference is usually specification — material grade, code extras or site difficulty — not the labour market, and it is worth asking which line moved.
| Figure | National average | Florida | Difference |
|---|---|---|---|
| Low end | $8,000 | $8,050 | 1% above |
| Typical project | $27,500 | $27,750 | 1% above |
| High end | $80,000 | $80,700 | 1% above |
For the full national breakdown — what is included, what is billed separately, DIY vs pro, and what drives the price — read the national kitchen remodel cost guide. The table below re-prices that same breakdown for Florida.
Cost breakdown, Florida-adjusted
The national guide's line items, with materials held at national prices and labour scaled by the Florida index of 1.02. Compare a real bid against this table line by line: if a contractor's labour lines run far above these figures, ask what is different about the job, and if the materials lines run far above, ask for the product grades.
| Line item | Materials | Labour (Florida) | Total |
|---|---|---|---|
| CabinetsSemi-custom, installed and levelled; about 35% of the whole budget | $8,000 | $1,750 | $9,750 |
| CountertopsQuartz, about 35 sq ft including the sink cutout and edge profile | $2,600 | $900 | $3,500 |
| AppliancesMid-range suite: range, refrigerator, dishwasher, microwave | $4,500 | $400 | $4,900 |
| FlooringLuxury vinyl or mid-range hardwood over the 120 sq ft floor | $900 | $800 | $1,700 |
| BacksplashSubway or similar tile, about 30 sq ft, set and grouted | $550 | $650 | $1,200 |
| Plumbing & electricalReconnect in place, code upgrades, under-cabinet lighting circuits | $800 | $1,750 | $2,550 |
| Sink, faucet & hardwareUndermount sink, pull-down faucet, cabinet pulls | $700 | $300 | $1,000 |
| LightingRecessed and under-cabinet fixtures, dimmers | $500 | $500 | $1,000 |
| Paint & finishingWalls and ceiling, trim touch-ups | $350 | $650 | $1,000 |
| Demolition, permits & disposalStrip-out of the old kitchen, permit where required, dump fees | $200 | $800 | $1,000 |
| Total for the typical projectState-adjusted from the national breakdown above | $19,100 | $8,550 | $27,650 |
Typical cost by city in Florida
Labour markets differ within a state too. These city figures apply each city's multiplier to the Florida typical price for the same project — use them to sanity-check a quote from a specific metro, not as a bid. Rural areas outside these metros often land below the cheapest city shown, while resort and island markets can exceed the highest.
| City | Typical project cost |
|---|---|
| Tallahassee | $25,550 |
| Jacksonville | $26,650 |
| Orlando | $27,200 |
| Tampa | $27,750 |
| Fort Lauderdale | $29,400 |
| Miami | $29,950 |
Florida rules, climate and code that change the price
Florida's cost driver is wind, not frost: the Florida Building Code sets high-velocity hurricane zone requirements in Miami-Dade and Broward counties and wind-speed maps statewide, so roofing needs enhanced nailing patterns and rated products, and fences and decks need wind-rated posts and connections. There is effectively no frost depth, so footings are shallow, but the water table and sandy soils affect post setting. Permits are required for roofing, decks and most structural work, and re-roofing triggers a code-compliance inspection of the decking underneath.
Kitchen Remodel Cost in Florida: what to watch
Florida kitchen remodels are humidity and flood-zone jobs. Moisture-resistant cabinetry, sealed countertop edges and proper range ventilation matter more here than in dry climates, because steam and humidity warp particleboard boxes and feed mould behind sinks. In coastal flood zones, elevation and flood-vent rules can constrain ground-floor work, and hurricane-rated windows and doors are often part of a larger remodel scope. Slab-on-grade construction again means moving plumbing is expensive, so layout changes carry a premium. Insurance and HOA rules in condominiums add approval layers that single-family homes avoid. Budget for moisture detailing and the permit, not just the cabinets and counters.
What to ask contractors in Florida
Four questions that catch the expensive surprises on this project in this state. Get the answers in writing, on the quote, before you compare prices — two quotes are only comparable when they describe the same job.
- Permit: Florida requires permits for roof replacements, decks and most structural projects in every county, and a re-roof inspection checks the condition of the roof deck itself. In Miami-Dade and Broward, products must carry high-velocity hurricane zone approval, which narrows material choice and raises prices.
- Specification: Ask for the full material specification — grades, ratings and the code extras in the state notes above — not just a brand name and a total.
- Labour basis: Ask how the quote treats the Florida labour market: a quote far above the $27,750 typical figure should name the extra work, access problem or specification that justifies it.
- Local references: Ask for two recent jobs in your city, not just your state — city prices above vary by thousands, and a contractor working regularly in your metro knows its permit office and inspectors.
Frequently asked questions — Florida
Florida requires permits for roof replacements, decks and most structural projects in every county, and a re-roof inspection checks the condition of the roof deck itself. In Miami-Dade and Broward, products must carry high-velocity hurricane zone approval, which narrows material choice and raises prices.
Florida labour sits close to the national average, but hurricane-code requirements — enhanced roof nailing, rated shingles and underlayment, wind-rated fence and deck connections — add material and labour that national averages do not include. Miami runs about 8% above the state figure.
Budget around $27,750 for the typical project (a minor mid-range remodel of a 10 × 12 ft kitchen — new semi-custom cabinets in the same layout, quartz counters, mid-range appliances) in Florida, with most jobs landing between $8,050 and $80,700. That typical figure is 1% above the national typical of $27,500, because Florida labour runs at 1.02× the national average and labour is about 45% of the installed price. Get at least three local quotes before committing — the range above is a planning figure, not a bid.
Yes. Within Florida, the typical project runs from about $25,550 in Tallahassee to about $29,950 in Miami, reflecting local labour markets and, where applicable, stricter local code requirements. The city figures above are planning estimates from the state average, not quotes — a specific job's price depends on its specification, access and site conditions.