(01) — Cost guide · Oklahoma edition

Drywall Installation Cost in Oklahoma (2026)

In Oklahoma, drywall installation cost for the typical project costs about $1,350 — 5% below the national average of $1,450. The gap comes from labor: Oklahoma labor runs at 0.88× the national average, and labor is about 45% of an installed price, so the state figure below scales the labor share only and leaves material prices at national levels. Read the national guide for the full breakdown, then use this page for the Oklahoma numbers, city prices and code notes.

$900
low end in Oklahoma — simple spec
$1,350
typical in Oklahoma — most homeowners pay near this
$3,050
high end in Oklahoma — premium materials, complex site
$2.13
per sq ft of board area, hung and finished to level 4, Oklahoma-adjusted

Typical project used for these figures: hanging and finishing a 12 × 16 ft room (walls and ceiling, about 640 sq ft of board, 20 sheets) to a level 4 finish. Ranges are 2026 planning figures for a professional installation in Oklahoma, derived from the national guide as explained below — always confirm with local quotes.

Oklahoma prices vs the national average

Materials for this project are priced nationally — a bundle of shingles or a pallet of panels costs roughly the same anywhere in the country before delivery. Labor is what moves, and Oklahoma labor sits at 0.88× the national average. Applying that index to the labor share (about 45% of the installed price) gives the Oklahoma range below. If your quotes cluster well outside it, the difference is usually specification — material grade, code extras or site difficulty — not the labor market, and it is worth asking which line moved.

FigureNational averageOklahomaDifference
Low end$950$9005% below
Typical project$1,450$1,3505% below
High end$3,200$3,0505% below

For the full national breakdown — what is included, what is billed separately, DIY vs pro, and what drives the price — read the national drywall installation cost guide. The table below re-prices that same breakdown for Oklahoma.

Cost breakdown, Oklahoma-adjusted

The national guide's line items, with materials held at national prices and labor scaled by the Oklahoma index of 0.88. Compare a real bid against this table line by line: if a contractor's labor lines run far above these figures, ask what is different about the job, and if the materials lines run far above, ask for the product grades.

Line itemMaterialsLabor (Oklahoma)Total
Drywall sheets20 sheets of 4 × 8 ft, 1/2 in standard board, including cutting waste $300 $0 $300
ConsumablesScrews, joint tape, corner bead and about 5 gallons of compound across coats $200 $0 $200
HangingBoard cut, lifted and screwed off on walls and ceiling $0 $400 $400
Taping & finishingTape coat, fill coat and finish coat to level 4, feathered and checked $0 $350 $350
Sanding, texture-ready prep & cleanupFinal sand, dust control, scrap removal $50 $50 $100
Total for the typical projectState-adjusted from the national breakdown above $550 $800 $1,350

Typical cost by city in Oklahoma

Labor markets differ within a state too. These city figures apply each city's multiplier to the Oklahoma typical price for the same project — use them to sanity-check a quote from a specific metro, not as a bid. Rural areas outside these metros often land below the cheapest city shown, while resort and island markets can exceed the highest.

CityTypical project cost
Oklahoma City$1,350
Tulsa$1,350
Norman$1,350
Broken Arrow$1,350
Edmond$1,400

Oklahoma rules, climate and code that change the price

Oklahoma is a low-cost labor market in the heart of Tornado Alley, so storm-rated roofing and wind-resistant connections are the dominant local specification — impact-resistant shingles and enhanced nailing are common and often insurance-driven. The state has no statewide residential code; cities adopt their own, with Oklahoma City and Tulsa the most thorough. Expansive clay soils in central Oklahoma affect footings, and frost depth is about 18 in.

Drywall Installation Cost in Oklahoma: what to watch

How much does drywall installation cost in Oklahoma? About $1,350 for hanging and finishing a 12×16 ft room — walls and ceiling, about 640 sq ft of board, 20 sheets — to a level 4 finish, about 7% below the national typical of $1,450, with most Oklahoma jobs landing between $900 and $3,050. Within the state, Oklahoma City and Tulsa both run about $1,350, while Norman and Broken Arrow run about $1,300 and Edmond about $1,400. Oklahoma drywall work is a storm job in the heart of Tornado Alley: storm-rated fasteners and bracing are the dominant local specification, and impact-resistant shingles with enhanced nailing are common and often insurance-driven. The state has no statewide residential code — cities adopt their own, with Oklahoma City and Tulsa the most thorough — so permit practice varies by city. Frost depth is about 18 in, and expansive clay soils in central Oklahoma affect footings and the framing the board hangs on. Compare quotes on finish level and moisture plan, because those two items decide whether an Oklahoma room looks crisp or shows every seam.

What to ask contractors in Oklahoma

Four questions that catch the expensive surprises on this project in this state. Get the answers in writing, on the quote, before you compare prices — two quotes are only comparable when they describe the same job.

  • Permit: Oklahoma cities require permits for roofing, decks and structural work under locally adopted codes, with Oklahoma City and Tulsa the most thorough. Storm-rated roofing specifications are routinely checked on re-roof permits.
  • Specification: Ask for the full material specification — grades, ratings and the code extras in the state notes above — not just a brand name and a total.
  • Labor basis: Ask how the quote treats the Oklahoma labor market: a quote far above the $1,350 typical figure should name the extra work, access problem or specification that justifies it.
  • Local references: Ask for two recent jobs in your city, not just your state — city prices above vary by thousands, and a contractor working regularly in your metro knows its permit office and inspectors.

Frequently asked questions — Oklahoma

How to read these numbers. Last updated October 2026 · Oklahoma figures are derived from the national guide by scaling the labor share (about 45% of the installed price) by the Oklahoma labor index of 0.88; materials are held at national prices. State indices are planning-grade figures compiled from published regional cost data, not contractor quotes. Always confirm with local quotes; your quote will vary.