(01) — Cost guide · Massachusetts edition
Drywall Installation Cost in Massachusetts (2026)
In Massachusetts, drywall installation cost for the typical project costs about $1,650 — 14% above the national average of $1,450. The gap comes from labor: Massachusetts labor runs at 1.3× the national average, and labor is about 45% of an installed price, so the state figure below scales the labor share only and leaves material prices at national levels. Read the national guide for the full breakdown, then use this page for the Massachusetts numbers, city prices and code notes.
- $1,100
- low end in Massachusetts — simple spec
- $1,650
- typical in Massachusetts — most homeowners pay near this
- $3,650
- high end in Massachusetts — premium materials, complex site
- $2.55
- per sq ft of board area, hung and finished to level 4, Massachusetts-adjusted
Typical project used for these figures: hanging and finishing a 12 × 16 ft room (walls and ceiling, about 640 sq ft of board, 20 sheets) to a level 4 finish. Ranges are 2026 planning figures for a professional installation in Massachusetts, derived from the national guide as explained below — always confirm with local quotes.
Massachusetts prices vs the national average
Materials for this project are priced nationally — a bundle of shingles or a pallet of panels costs roughly the same anywhere in the country before delivery. Labor is what moves, and Massachusetts labor sits at 1.3× the national average. Applying that index to the labor share (about 45% of the installed price) gives the Massachusetts range below. If your quotes cluster well outside it, the difference is usually specification — material grade, code extras or site difficulty — not the labor market, and it is worth asking which line moved.
| Figure | National average | Massachusetts | Difference |
|---|---|---|---|
| Low end | $950 | $1,100 | 14% above |
| Typical project | $1,450 | $1,650 | 14% above |
| High end | $3,200 | $3,650 | 14% above |
For the full national breakdown — what is included, what is billed separately, DIY vs pro, and what drives the price — read the national drywall installation cost guide. The table below re-prices that same breakdown for Massachusetts.
Cost breakdown, Massachusetts-adjusted
The national guide's line items, with materials held at national prices and labor scaled by the Massachusetts index of 1.3. Compare a real bid against this table line by line: if a contractor's labor lines run far above these figures, ask what is different about the job, and if the materials lines run far above, ask for the product grades.
| Line item | Materials | Labor (Massachusetts) | Total |
|---|---|---|---|
| Drywall sheets20 sheets of 4 × 8 ft, 1/2 in standard board, including cutting waste | $300 | $0 | $300 |
| ConsumablesScrews, joint tape, corner bead and about 5 gallons of compound across coats | $200 | $0 | $200 |
| HangingBoard cut, lifted and screwed off on walls and ceiling | $0 | $600 | $600 |
| Taping & finishingTape coat, fill coat and finish coat to level 4, feathered and checked | $0 | $500 | $500 |
| Sanding, texture-ready prep & cleanupFinal sand, dust control, scrap removal | $50 | $100 | $100 |
| Total for the typical projectState-adjusted from the national breakdown above | $550 | $1,200 | $1,700 |
Typical cost by city in Massachusetts
Labor markets differ within a state too. These city figures apply each city's multiplier to the Massachusetts typical price for the same project — use them to sanity-check a quote from a specific metro, not as a bid. Rural areas outside these metros often land below the cheapest city shown, while resort and island markets can exceed the highest.
| City | Typical project cost |
|---|---|
| Springfield | $1,500 |
| Worcester | $1,550 |
| Lowell | $1,600 |
| Boston | $1,800 |
| Cambridge | $1,850 |
Massachusetts rules, climate and code that change the price
Massachusetts has the highest labor index in the program, a statewide building code with a stretch energy code adopted by many municipalities, and frost depth of 48 in — the deepest standard footing requirement in the country. Boston-area access, parking and disposal costs add further expense, and older housing stock often reveals code-upgrade work (electrical, structural) once a project opens up. Coastal wind requirements apply on the Cape and Islands.
Drywall Installation Cost in Massachusetts: what to watch
How much does drywall installation cost in Massachusetts? About $1,650 for hanging and finishing a 12×16 ft room — walls and ceiling, about 640 sq ft of board, 20 sheets — to a level 4 finish, about 14% above the national typical of $1,450, with most Massachusetts jobs landing between $1,100 and $3,650. Within the state, Cambridge runs about $1,850 and Boston about $1,800, while Springfield runs about $1,500. Massachusetts drywall work carries the highest labor index in the program, a statewide building code with a stretch energy code adopted by many municipalities, and frost depth of 48 in — the deepest standard footing requirement in the country. Boston-area access, parking and disposal costs add further expense, and older housing stock often reveals code-upgrade work once a project opens up. Coastal wind requirements apply on the Cape and Islands. Confirm the finish level and the scope of any code-upgrade work in writing before comparing prices, because a Massachusetts quote that prices board alone is not comparable to one that includes the rest.
What to ask contractors in Massachusetts
Four questions that catch the expensive surprises on this project in this state. Get the answers in writing, on the quote, before you compare prices — two quotes are only comparable when they describe the same job.
- Permit: Massachusetts requires permits statewide under its building code, and many cities have adopted the stretch energy code, which raises insulation and air-sealing requirements on remodels and additions. Boston permits and inspections are thorough and slow.
- Specification: Ask for the full material specification — grades, ratings and the code extras in the state notes above — not just a brand name and a total.
- Labor basis: Ask how the quote treats the Massachusetts labor market: a quote far above the $1,650 typical figure should name the extra work, access problem or specification that justifies it.
- Local references: Ask for two recent jobs in your city, not just your state — city prices above vary by thousands, and a contractor working regularly in your metro knows its permit office and inspectors.
Frequently asked questions — Massachusetts
Massachusetts requires permits statewide under its building code, and many cities have adopted the stretch energy code, which raises insulation and air-sealing requirements on remodels and additions. Boston permits and inspections are thorough and slow.
Massachusetts labor runs about 30% above the national average, the highest in the program, with Boston and Cambridge further above the state figure. Four-foot frost footings and stretch energy-code requirements add cost beyond labor alone.
Budget around $1,650 for the typical project (hanging and finishing a 12 × 16 ft room (walls and ceiling, about 640 sq ft of board, 20 sheets) to a level 4 finish) in Massachusetts, with most jobs landing between $1,100 and $3,650. That typical figure is 14% above the national typical of $1,450, because Massachusetts labor runs at 1.3× the national average and labor is about 45% of the installed price. Get at least three local quotes before committing — the range above is a planning figure, not a bid.
Yes. Within Massachusetts, the typical project runs from about $1,500 in Springfield to about $1,850 in Cambridge, reflecting local labor markets and, where applicable, stricter local code requirements. The city figures above are planning estimates from the state average, not quotes — a specific job's price depends on its specification, access and site conditions.
About $1,850 for hanging and finishing a 12×16 ft room — walls and ceiling, about 640 sq ft of board, 20 sheets — to a level 4 finish, above the Massachusetts typical of $1,650, with most Massachusetts jobs landing between $1,100 and $3,650. Cambridge is the state's highest-cost drywall market, priced by the Boston-area labor market and thorough permitting. The stretch energy code adopted by many municipalities raises insulation and air-sealing requirements, and older housing stock often reveals code-upgrade work once the project opens up.