(01) — Cost guide · Indiana edition
Drywall Installation Cost in Indiana (2026)
In Indiana, drywall installation cost for the typical project costs about $1,400 — 4% below the national average of $1,450. The gap comes from labor: Indiana labor runs at 0.92× the national average, and labor is about 45% of an installed price, so the state figure below scales the labor share only and leaves material prices at national levels. Read the national guide for the full breakdown, then use this page for the Indiana numbers, city prices and code notes.
- $900
- low end in Indiana — simple spec
- $1,400
- typical in Indiana — most homeowners pay near this
- $3,100
- high end in Indiana — premium materials, complex site
- $2.17
- per sq ft of board area, hung and finished to level 4, Indiana-adjusted
Typical project used for these figures: hanging and finishing a 12 × 16 ft room (walls and ceiling, about 640 sq ft of board, 20 sheets) to a level 4 finish. Ranges are 2026 planning figures for a professional installation in Indiana, derived from the national guide as explained below — always confirm with local quotes.
Indiana prices vs the national average
Materials for this project are priced nationally — a bundle of shingles or a pallet of panels costs roughly the same anywhere in the country before delivery. Labor is what moves, and Indiana labor sits at 0.92× the national average. Applying that index to the labor share (about 45% of the installed price) gives the Indiana range below. If your quotes cluster well outside it, the difference is usually specification — material grade, code extras or site difficulty — not the labor market, and it is worth asking which line moved.
| Figure | National average | Indiana | Difference |
|---|---|---|---|
| Low end | $950 | $900 | 4% below |
| Typical project | $1,450 | $1,400 | 4% below |
| High end | $3,200 | $3,100 | 4% below |
For the full national breakdown — what is included, what is billed separately, DIY vs pro, and what drives the price — read the national drywall installation cost guide. The table below re-prices that same breakdown for Indiana.
Cost breakdown, Indiana-adjusted
The national guide's line items, with materials held at national prices and labor scaled by the Indiana index of 0.92. Compare a real bid against this table line by line: if a contractor's labor lines run far above these figures, ask what is different about the job, and if the materials lines run far above, ask for the product grades.
| Line item | Materials | Labor (Indiana) | Total |
|---|---|---|---|
| Drywall sheets20 sheets of 4 × 8 ft, 1/2 in standard board, including cutting waste | $300 | $0 | $300 |
| ConsumablesScrews, joint tape, corner bead and about 5 gallons of compound across coats | $200 | $0 | $200 |
| HangingBoard cut, lifted and screwed off on walls and ceiling | $0 | $400 | $400 |
| Taping & finishingTape coat, fill coat and finish coat to level 4, feathered and checked | $0 | $350 | $350 |
| Sanding, texture-ready prep & cleanupFinal sand, dust control, scrap removal | $50 | $50 | $100 |
| Total for the typical projectState-adjusted from the national breakdown above | $550 | $850 | $1,400 |
Typical cost by city in Indiana
Labor markets differ within a state too. These city figures apply each city's multiplier to the Indiana typical price for the same project — use them to sanity-check a quote from a specific metro, not as a bid. Rural areas outside these metros often land below the cheapest city shown, while resort and island markets can exceed the highest.
| City | Typical project cost |
|---|---|
| Fort Wayne | $1,300 |
| Evansville | $1,300 |
| South Bend | $1,350 |
| Indianapolis | $1,400 |
| Carmel | $1,450 |
Indiana rules, climate and code that change the price
Indiana enforces a statewide residential code with county and city building departments, and its labor market is uniformly below average. Frost depth is 30–36 in, so footings are deep by southern standards, and lake-effect snow in the northwest corner raises snow loads. Indianapolis and Carmel run slightly above the state figure; the rest of the state is even.
Drywall Installation Cost in Indiana: what to watch
How much does drywall installation cost in Indiana? About $1,400 for hanging and finishing a 12×16 ft room — walls and ceiling, about 640 sq ft of board, 20 sheets — to a level 4 finish, about 4% below the national typical of $1,450, with most Indiana jobs landing between $900 and $3,100. Within the state, Carmel runs about $1,450 and Indianapolis about $1,400, while Fort Wayne and Evansville run about $1,300 and South Bend about $1,350. Indiana drywall work benefits from the state's uniform system: a statewide residential code with county and city building departments, so permits and inspections are consistent and quotes are genuinely comparable. Frost depth is 30–36 in, so footings are deep by southern standards. Lake-effect snow in the northwest corner raises snow loads on roofs and decks, and the labor market is uniformly below average, with Indianapolis and Carmel running slightly above the state figure. Compare the finish level, the dust-control plan and the moisture plan line by line, and be suspicious of any quote that prices level 3 work against a level 4 specification.
What to ask contractors in Indiana
Four questions that catch the expensive surprises on this project in this state. Get the answers in writing, on the quote, before you compare prices — two quotes are only comparable when they describe the same job.
- Permit: Indiana requires permits for roofing, decks and structural work through local building departments under the statewide residential code. Northwest counties add lake-effect snow-load checks to roof and deck permits.
- Specification: Ask for the full material specification — grades, ratings and the code extras in the state notes above — not just a brand name and a total.
- Labor basis: Ask how the quote treats the Indiana labor market: a quote far above the $1,400 typical figure should name the extra work, access problem or specification that justifies it.
- Local references: Ask for two recent jobs in your city, not just your state — city prices above vary by thousands, and a contractor working regularly in your metro knows its permit office and inspectors.
Frequently asked questions — Indiana
Indiana requires permits for roofing, decks and structural work through local building departments under the statewide residential code. Northwest counties add lake-effect snow-load checks to roof and deck permits.
Indiana labor runs about 8% below the national average and is even across its cities. Deep frost footings are the standard local cost.
Budget around $1,400 for the typical project (hanging and finishing a 12 × 16 ft room (walls and ceiling, about 640 sq ft of board, 20 sheets) to a level 4 finish) in Indiana, with most jobs landing between $900 and $3,100. That typical figure is 4% below the national typical of $1,450, because Indiana labor runs at 0.92× the national average and labor is about 45% of the installed price. Get at least three local quotes before committing — the range above is a planning figure, not a bid.
Yes. Within Indiana, the typical project runs from about $1,300 in Fort Wayne to about $1,450 in Carmel, reflecting local labor markets and, where applicable, stricter local code requirements. The city figures above are planning estimates from the state average, not quotes — a specific job's price depends on its specification, access and site conditions.
About $1,400 for hanging and finishing a 12×16 ft room — walls and ceiling, about 640 sq ft of board, 20 sheets — to a level 4 finish, right on the Indiana typical of $1,400, with most Indiana jobs landing between $900 and $3,100. Indianapolis runs at the state figure, with Carmel slightly above it at about $1,450. The statewide residential code makes permits and inspections consistent across the state, and frost depth of 30–36 in keeps the structure behind the board deep-footed — compare finish level and dust control line by line.