(01) — Cost guide · Tennessee edition

Deck Build Cost in Tennessee (2026)

In Tennessee, deck build cost for the typical project costs about $8,200 — 4% below the national average of $8,600. The gap comes from labor: Tennessee labor runs at 0.9× the national average, and labor is about 45% of an installed price, so the state figure below scales the labor share only and leaves material prices at national levels. Read the national guide for the full breakdown, then use this page for the Tennessee numbers, city prices and code notes.

$4,000
low end in Tennessee — simple spec
$8,200
typical in Tennessee — most homeowners pay near this
$16,700
high end in Tennessee — premium materials, complex site
$25.79
per sq ft installed, typical pressure-treated build, Tennessee-adjusted

Typical project used for these figures: a 16 × 20 ft (320 sq ft) ground-level deck in pressure-treated lumber, one set of steps, railing on three sides. Ranges are 2026 planning figures for a professional installation in Tennessee, derived from the national guide as explained below — always confirm with local quotes.

Tennessee prices vs the national average

Materials for this project are priced nationally — a bundle of shingles or a pallet of panels costs roughly the same anywhere in the country before delivery. Labor is what moves, and Tennessee labor sits at 0.9× the national average. Applying that index to the labor share (about 45% of the installed price) gives the Tennessee range below. If your quotes cluster well outside it, the difference is usually specification — material grade, code extras or site difficulty — not the labor market, and it is worth asking which line moved.

FigureNational averageTennesseeDifference
Low end$4,200$4,0004% below
Typical project$8,600$8,2004% below
High end$17,500$16,7004% below

For the full national breakdown — what is included, what is billed separately, DIY vs pro, and what drives the price — read the national deck build cost guide. The table below re-prices that same breakdown for Tennessee.

Cost breakdown, Tennessee-adjusted

The national guide's line items, with materials held at national prices and labor scaled by the Tennessee index of 0.9. Compare a real bid against this table line by line: if a contractor's labor lines run far above these figures, ask what is different about the job, and if the materials lines run far above, ask for the product grades.

Line itemMaterialsLabor (Tennessee)Total
Footings & concreteDug or augered holes below frost depth, poured concrete, post bases $450 $500 $950
Framing lumber & beamsLedger, beams, joists, blocking and posts $1,100 $800 $1,900
Decking boardsPressure-treated boards, laid straight with a waste allowance $1,300 $1,000 $2,300
Railing & balustersThree sides, code-height rail with balusters $650 $500 $1,150
StepsOne set of steps with stringers and treads $350 $350 $700
Hardware, fasteners & flashingJoist hangers, structural screws, ledger flashing $400 $150 $550
Permits, plans & disposalBuilding permit, simple plan set, offcut and packaging disposal $450 $250 $700
Total for the typical projectState-adjusted from the national breakdown above $4,700 $3,500 $8,200

Typical cost by city in Tennessee

Labor markets differ within a state too. These city figures apply each city's multiplier to the Tennessee typical price for the same project — use them to sanity-check a quote from a specific metro, not as a bid. Rural areas outside these metros often land below the cheapest city shown, while resort and island markets can exceed the highest.

CityTypical project cost
Clarksville$7,700
Memphis$7,900
Knoxville$7,900
Chattanooga$7,900
Nashville$8,550

Tennessee rules, climate and code that change the price

Tennessee is a low-cost labor market with a statewide residential code and local enforcement that varies in thoroughness; Nashville is the state's higher-cost metro. Frost depth is 12–18 in, seismic risk is real in the Memphis area (New Madrid zone) though rarely priced into residential quotes, and humidity and termite pressure make treated lumber and ventilation standard practice. Tornado and severe-storm exposure affects roofing specifications in the middle of the state.

Deck Build Cost in Tennessee: what to watch

How much does a deck cost in Tennessee? About $8,200 for a typical 16×20 ft (320 sq ft) ground-level pressure-treated deck — about 5% below the national typical of $8,600 — with most Tennessee jobs landing between $4,000 and $16,700. Within the state, Nashville runs about $8,550, while Memphis and Knoxville run about $7,850. Tennessee deck building is a humidity and termite job: warm, humid summers make pressure-treated framing and good airflow under the deck standard practice, and termite protection belongs in every specification. A statewide residential code applies, with local enforcement that varies in thoroughness, and Nashville enforces most thoroughly. Frost depth is 12–18 in, so footings are shallow and cheap, but tornado and severe-storm exposure in the middle of the state makes storm-rated fasteners and bracing worth specifying. Memphis sits in the New Madrid seismic zone, though the risk is rarely priced into residential quotes. Get the footing depth, the ledger flashing detail and the termite treatment in writing before comparing prices.

What to ask contractors in Tennessee

Four questions that catch the expensive surprises on this project in this state. Get the answers in writing, on the quote, before you compare prices — two quotes are only comparable when they describe the same job.

  • Permit: Tennessee requires permits for roofing, decks and structural work through local building departments. Nashville and the larger cities enforce most thoroughly; smaller jurisdictions may be lighter but still require permits for structural work.
  • Specification: Ask for the full material specification — grades, ratings and the code extras in the state notes above — not just a brand name and a total.
  • Labor basis: Ask how the quote treats the Tennessee labor market: a quote far above the $8,200 typical figure should name the extra work, access problem or specification that justifies it.
  • Local references: Ask for two recent jobs in your city, not just your state — city prices above vary by thousands, and a contractor working regularly in your metro knows its permit office and inspectors.

Frequently asked questions — Tennessee

How to read these numbers. Last updated October 2026 · Tennessee figures are derived from the national guide by scaling the labor share (about 45% of the installed price) by the Tennessee labor index of 0.9; materials are held at national prices. State indices are planning-grade figures compiled from published regional cost data, not contractor quotes. Always confirm with local quotes; your quote will vary.