Calculator — Kids & Play
Playground Mulch Calculator
Playground surfacing by the CPSC fall-height rule — cubic yards and bag count for the whole use zone.
Inputs
Results
Adjust the inputs to see your result.
About this calculator
Playground mulch is safety surfacing: the depth that absorbs a fall depends on how high a child can fall from, and the CPSC publishes the depths — 6 in for falls up to 4 ft, 9 in for 5–7 ft, 12 in for 8–10 ft. This calculator turns your play area and fall height into cubic yards and bags.
What this number means
Playground mulch is safety surfacing, not decoration: its job is to absorb a fall, and the depth that does the job depends on how high a child can fall from. The U.S. Consumer Product Safety Commission (CPSC) publishes the depths for loose-fill surfacing — 6 in for falls up to 4 ft, 9 in for 5–7 ft, and 12 in for 8–10 ft — measured as uncompressed depth, before the mulch settles and compacts under play.
The area is the whole use zone, not just the equipment: the CPSC use zone extends 6 ft in every direction from the equipment footprint, and that full area needs surfacing at the full depth. A 20 × 20 ft play area at 9 in deep is 300 cubic feet — about 12 cubic yards — which is why this is a bulk-delivery job, not a bag job.
The formula
- Depth by fall height (CPSC guidance, uncompressed loose-fill): up to 4 ft → 6 in; 5–7 ft → 9 in; 8–10 ft → 12 in
- Volume = area × depth ÷ 12 (cubic feet)
- Cubic yards = cu ft ÷ 27, rounded up for ordering
- Bags = ceil(cu ft ÷ 2) for 2-cu-ft bags (13.5 bags per cubic yard)
Worked example
A 20 × 20 ft play area under a swing set with a 7 ft fall height.
- Depth: 7 ft fall height → 9 in (CPSC guidance)
- Volume: 400 sq ft × 9 ÷ 12 = 300 cu ft
- Cubic yards: 300 ÷ 27 = 11.11 → order 12 cu yd
- Bags: 300 ÷ 2 = 150 × 2-cu-ft bags
Assumptions and limitations
- Depths are CPSC guidance for uncompressed loose-fill surfacing (engineered wood fiber and similar). Measure the depth after spreading, before it is walked on — mulch compacts over time, so check the depth every spring and top it up.
- The area entered should include the 6 ft use zone around the equipment, not just the footprint of the swing set or slide.
- Rubber mulch follows the same volume maths and is sold by the cubic foot or cubic yard too, but its fall-height ratings differ by product — follow the manufacturer\'s rating for rubber, not this table.
- Wood fiber breaks down and needs topping up; rubber mulch lasts longer but costs several times more per cubic yard and gets hot in direct sun.
Frequently asked questions
At the standard 9 in depth (for a 7 ft fall height): 300 cubic feet, or 11.11 cubic yards — order 12 cu yd, or 150 × 2-cu-ft bags. At 6 in depth it is 200 cu ft (8 cu yd); at 12 in it is 400 cu ft (15 cu yd).
Follow the CPSC guidance for loose-fill surfacing: 6 in for fall heights up to 4 ft, 9 in for 5–7 ft, and 12 in for 8–10 ft. Those are uncompressed depths — the mulch settles, so check it every spring and top it up to the full depth.
The Consumer Product Safety Commission's Public Playground Safety Handbook sets loose-fill surfacing depths by the highest fall height: up to 4 ft needs 6 in, 5–7 ft needs 9 in, and 8–10 ft needs 12 in, measured before the material compacts.
Engineered wood fiber is the cheaper, standard choice — it cushions well but breaks down and needs annual top-ups. Rubber mulch lasts years and drains well, but costs several times more, gets hot in sun, and follows the manufacturer's own fall-height rating rather than the CPSC loose-fill table.
Check the depth every spring and after heavy play seasons, and top up to the full CPSC depth. Wood fiber typically loses an inch or two a year to compaction and decomposition — a yearly top-up keeps the fall protection real.
13.5 × 2-cu-ft bags make one cubic yard (27 cu ft ÷ 2). For a whole playground, bulk delivery by the cubic yard is far cheaper — a 12 cu yd order would be 162 bags.