Calculator — Furniture & Decor
Curtain Size Calculator
How many curtain panels, how wide, and how long — from your window size, fullness and length style.
Inputs
Results
Adjust the inputs to see your result.
About this calculator
Curtains are bought by the panel, and the panel count is set by fullness: 1.5× is flat and tailored, 2× is the standard full look, 2.5× is lush. This calculator turns your window measurements, fullness and length style into a rod length, a panel count and a finished drop.
What this number means
Curtains are bought by the panel, and the panel count is set by fullness: flat fabric stretched across a rod looks like a sheet, so you buy one and a half to two and a half times the rod length in fabric and let it gather. The rod itself runs past the window — 6 in each side — so the panels can stack clear of the glass when open, and the drop is measured from a rod mounted 4 in above the frame, not from the top of the window.
Length is a style choice with practical consequences. Sill length stays clear of radiators and counters, apron length covers the sill, floor length is the living-room standard, and a puddle pools fabric on the floor for a formal look — beautiful, and a trip hazard in a busy room. Panels are rounded up to an even number so they hang as matching pairs.
The formula
- Rod length = window width + 12 in (6 in past the frame on each side)
- Total fabric width = rod length × fullness (1.5×, 2× or 2.5×)
- Panels = ceil(fabric width ÷ panel width), rounded up to an even number for matching pairs
- Curtain length = 4 in (rod above the frame) + window height + style extra: sill +1 in, apron +6 in, floor + sill-to-floor, puddle + sill-to-floor + 6 in
Worked example
A 60 × 48 in window, sill 24 in from the floor, 2× fullness, floor length, 50-in panels.
- Rod length: 60 + 12 = 72 in (6 ft)
- Total fabric: 72 × 2 = 144 in
- Panels: ceil(144 ÷ 50) = 3 → round up to 4 panels (2 pairs)
- Length: 4 + 48 + 24 = 76 in (6 ft 4 in)
Assumptions and limitations
- The rod is mounted 4 in above the window frame and extends 6 in past the frame on each side. Mounting higher — up to 6 in above the frame — makes the window look taller; add the extra inches to the length.
- Floor length is worked to the floor itself; hem the panels ½ in short so they hang cleanly without dragging.
- Panel width is 50 in for standard ready-made panels. Wide panels (54 in, 100 in) change the count — enter your actual panel width.
- Fullness is a matter of taste and fabric weight: sheer fabrics need 2.5× to look full, heavy velvets look right at 1.5–2×. Blackout lining adds stiffness and weight, so size the rod and brackets for it.
Frequently asked questions
The rod runs 72 in (60 in + 12 in). At the standard 2× fullness that is 144 in of fabric — four 50-in panels, hung as two pairs. At 1.5× fullness three panels cover it; at 2.5× you need four.
The total fabric width is twice the rod length. For a 72 in rod, 2× fullness means 144 in of fabric, which gathers into soft folds when drawn. 1.5× is a flat, tailored look and 2.5× is lush and formal.
Measure from the rod — 4 in above the window frame — to the style you want: just past the sill for sill length, 6 in below the sill for apron length, to the floor for floor length, or 6 in past the floor for a puddle. For a 48 in window with the sill 24 in off the floor, floor length is 76 in.
4–6 in above the frame, and 6 in wider than the frame on each side. The extra height makes the window look taller, and the extra width lets the panels stack clear of the glass when the curtains are open.
Divide the total fabric width (rod length × fullness) by your panel width and round up to an even number, so the panels hang as matching pairs. A 72 in rod at 2× fullness needs 144 in of fabric — four 50-in panels.
Only in a formal, low-traffic room on a hard floor — the puddle is 6 in of extra fabric pooling on the floor, and it collects dust and trips people. Skip it in kids' rooms, kitchens and anywhere the curtains are opened and closed daily.