Article — Tips & Tricks · November 11, 2026 · 15 min read

Kitchen Range Hood Buying Guide: CFM, Ducted vs Ductless and What a Good One Costs

A good range hood costs $200 to $1,000, needs 300 to 600 CFM for a standard 30 in range and 600 to 1,200 CFM for a professional range, and works only when it is as wide as the cooktop, mounted 24 to 36 in above it, and vented outside.

A good kitchen range hood costs $200 to $1,000 for a mid-range model, needs 300 to 600 cubic feet per minute (CFM) for a standard 30 in gas range and 600 to 1,200 CFM for a professional-style range, and works only when it is the right width, the right height, and vented outside wherever possible. Ducted hoods remove smoke, grease, and moisture from the house entirely, while ductless hoods filter the air and send it back into the kitchen. The right hood keeps grease off your cabinets, cuts cooking odors, and protects indoor air quality — and the wrong one is a noisy decoration that does nothing. Price the full kitchen project with the kitchen remodel cost guide, size the countertop it sits over with the Countertop Calculator, and match the fixtures beside it with the kitchen faucet buying guide.

Modern kitchen with a stainless steel chimney range hood over a gas range, with white cabinets and a marble countertop

How much CFM does a range hood need?

A range hood needs 100 CFM for every 10,000 BTU of gas cooking power, which means a standard 30 in gas range with 40,000 total BTU needs about 400 CFM, a 36 in range with 60,000 BTU needs about 600 CFM, and a professional-style 48 in range with 90,000 to 120,000 BTU needs 900 to 1,200 CFM. For an electric range the rule is simpler: allow 100 CFM for every 10 in of cooktop width, so a 30 in electric range needs 300 CFM and a 36 in range needs 360 CFM. These are minimums, not targets — a hood that is too weak lets grease settle on the cabinets and smoke drift through the house, and the most common complaint about a new range hood is that it cannot keep up with a searing steak or a wok. Buy 20 to 30 percent more CFM than the minimum if you sear, fry, or stir-fry regularly, if the kitchen is open plan and the cooking smoke has nowhere to go, or if the duct run is long, because every elbow and every 10 ft of duct steals 5 to 10 percent of the rated airflow.

CFM is only half the story, because a hood rated at 900 CFM that is mounted too high or too narrow captures nothing. The hood should be the same width as the cooktop or 3 to 6 in wider: a 30 in range needs a 30 to 36 in hood, and a 36 in range needs a 36 to 42 in hood. Mounting height matters just as much: the bottom of the hood should sit 24 to 30 in above an electric cooktop and 28 to 36 in above a gas cooktop, with 30 in the sweet spot for most kitchens. A hood mounted higher than 36 in loses capture badly, because the rising plume of hot air spreads as it climbs and the smoke spills past the edges of the hood. Noise is the third number to check: a hood running at 600 CFM should stay under 5 sones on high and under 2 sones on low, and the best hoods use a variable-speed blower so you can run them quietly for simmering and turn them up only for searing. Always check the sone rating, not just the CFM, because a loud hood gets switched off, and a hood that is off moves zero air.

Ducted vs ductless range hood: which one should you buy?

A ducted range hood is the right choice whenever you can vent it outside, because it removes smoke, grease, steam, and cooking odors from the house completely, while a ductless hood only filters the air through a charcoal filter and sends it back into the kitchen. Ducted hoods cost $300 to $1,500 for the hood itself, plus $200 to $800 for the ductwork and installation, and they need a 6 in round or 3-1/4 by 10 in rectangular duct run to the outside, ideally with the shortest, straightest path possible. A ductless hood costs $150 to $600, installs in an hour with no ductwork, and is the only option for a condo, apartment, or a kitchen on an interior wall where running a duct would mean tearing open ceilings. But the charcoal filters in a ductless hood need replacing every 3 to 6 months at $20 to $50 each, and they do nothing about steam and humidity, so a kitchen with a ductless hood still fogs up and still smells like last night's fish.

The deciding factor is not preference but what your kitchen allows. If the range sits on an exterior wall, a ducted hood is a straightforward job: a 6 in hole through the wall, a short horizontal duct, and a wall cap with a damper, for about $200 to $400 in labor. If the range sits on an interior wall or an island, a ducted hood needs a vertical run up through the ceiling and out the roof, which costs $500 to $1,000 and may need a roofer to flash the roof cap properly. In a condo or a rental where you cannot cut through the building envelope, a ductless hood is the only option, and you should buy the best one you can afford: a model with a baffle filter rather than a mesh filter, a charcoal filter you can buy from the manufacturer for years, and at least 300 to 400 CFM. Never buy a ductless hood and expect it to perform like a ducted one, and never install a ducted hood with a flexible foil duct, because the ridges trap grease, cut airflow by 30 percent or more, and are a fire hazard — use smooth rigid metal duct and seal every joint with foil tape, not duct tape.

What type of range hood fits your kitchen layout?

An under-cabinet range hood is the most common choice and the best value: it mounts under a wall cabinet above the range, costs $150 to $800, and works well in a standard kitchen where the range sits against the wall under a cabinet. Under-cabinet hoods come in ducted and ductless versions, and the best ones have baffle filters, which trap grease in channels and can go in the dishwasher, rather than mesh filters, which clog and are hard to clean. A wall-mount chimney hood costs $400 to $1,500, bolts to the wall and vents up through a decorative chimney, and suits a kitchen with no cabinet above the range, a high ceiling, or a focal-point range wall. Chimney hoods capture better than under-cabinet models because their canopy is deeper and wider, but they need a ceiling at least 8 ft high to look right and a duct run that the chimney can hide.

An island range hood costs $600 to $2,000 and hangs from the ceiling over an island cooktop, where it has to capture smoke from all four sides with no wall to help, so it needs 20 to 30 percent more CFM than a wall hood for the same range and a canopy at least 6 in wider than the cooktop on each side. Island hoods are the most expensive to install because the duct run goes up through the ceiling and out the roof, and the electrical supply has to be routed through the ceiling too. A downdraft hood, which rises from behind the cooktop and pulls smoke down, costs $500 to $1,200 and is the last resort: it fights physics, because hot air rises, and it captures poorly compared with any overhead hood, so it belongs only where an overhead hood is impossible, such as a cooktop in front of a window. A microwave-range hood combination costs $250 to $600 and saves space, but it is the weakest option of all: most over-the-range microwaves move only 200 to 300 CFM, their filters are small, and they sit too high to capture well. Choose the hood type by the layout first and the budget second, because a hood that does not fit the layout will not work no matter how much it costs.

Close-up of a stainless steel range hood baffle filter being removed for cleaning, with a gas cooktop below it
A good range hood costs $200 to $1,000, needs 300 to 600 CFM for a standard 30 in range and 600 to 1,200 CFM for a professional range, and works only when it is as wide as the cooktop, mounted 24 to 36 in above it, and vented outside.

How much does a good range hood cost in total?

A good range hood costs $200 to $1,000 for a mid-range under-cabinet or chimney model, $100 to $300 for a basic budget model, and $1,000 to $2,500 for a premium or professional-style hood with a 900 to 1,200 CFM blower, baffle filters, and a quiet variable-speed motor. The price tiers track real differences: budget hoods use mesh filters, a single-speed fan, and a thin steel body that rattles at high speed; mid-range hoods add baffle filters, 3 to 4 fan speeds, LED lighting, and a sturdier body; premium hoods add a remote blower option, a heat sensor that turns the fan on automatically, and a sone rating under 3 at full speed. Installation costs $150 to $400 for a straightforward under-cabinet swap, $300 to $800 for a chimney or island hood that needs new ductwork, and $500 to $1,000 for a new duct run through the roof. Add $100 to $300 for an electrician if the hood needs a new dedicated circuit, which most hoods over 600 CFM do.

The total cost of ownership is what matters, because the filter and the electricity add up. Baffle filters cost $30 to $60 each and last for years with regular dishwasher cleaning, while charcoal filters for a ductless hood cost $20 to $50 and need replacing every 3 to 6 months, which adds $80 to $200 a year. A hood running at 600 CFM uses about 150 to 250 watts, so running it for an hour a day costs roughly $10 to $20 a year in electricity — a trivial amount next to the cost of grease damage to cabinets, which can run $500 to $2,000 to clean or refinish. The hidden cost that catches buyers off guard is makeup air: in a tight, modern home, a hood over 400 CFM can pull the house into negative pressure and backdraft a furnace or water heater, so many building codes now require a makeup air unit for hoods over 400 CFM, which adds $300 to $800 to the job. Check your local code before you buy a 900 CFM hood, and budget the makeup air damper if your home was built after 2010 and is well sealed. Buy from a brand with a real parts program — Broan, Zephyr, Bosch, and Vent-A-Hood all stock filters and motors for years — because a hood from a no-name brand becomes disposable the moment one filter size is discontinued.

Range hood filters, lighting, and the features worth paying for

Baffle filters are the single best feature on a range hood: they are made of curved stainless steel channels that trap grease as the air flows through, they hold 2 to 3 times more grease than mesh filters before they need cleaning, and they go straight into the dishwasher, which means they actually get cleaned. Mesh filters are cheaper and lighter, but they clog quickly, they are hard to clean by hand, and a clogged mesh filter can cut airflow by 40 percent. Charcoal filters are only for ductless hoods, and they need replacing every 3 to 6 months — set a calendar reminder when you install one, because a saturated charcoal filter does nothing at all. Clean baffle or mesh filters every 2 to 4 weeks if you cook daily, and never run a hood with the filters removed, because the grease goes straight into the blower and the duct, where it becomes a fire hazard.

Lighting is the second feature that matters every day. LED lights are now standard on any hood worth buying, and they should be bright enough to light the whole cooktop — look for at least 2 LED lamps at 300 to 400 lumens each, with a warm color temperature around 2700 to 3000 Kelvin so food looks appetizing rather than washed out. A variable-speed blower with at least 3 speeds is worth paying for, because you will run the hood on low for simmering and only use high for searing, and a hood with a single speed is either too loud or too weak all the time. A heat sensor that turns the fan on automatically when the cooktop gets hot is a genuinely useful feature, because it protects the cabinets when someone forgets to switch the hood on. A remote blower, where the fan motor sits outside the house on the roof or in the attic, is the quietest option of all and costs $200 to $500 extra, but it is worth it in an open-plan kitchen where the hood is the loudest thing in the room. Skip the gimmicks: a hood with a built-in Bluetooth speaker or a touch screen adds $100 to $200 and nothing to the cooking, and a hood with a tiny grease cup that needs emptying every week is a design flaw, not a feature.

Installing a range hood and keeping it working for 15 years

Installing an under-cabinet range hood is a 2 to 4 hour job for a confident homeowner: turn off the power at the breaker, remove the old hood, mark the duct and mounting holes using the template the manufacturer supplies, cut the duct opening, mount the hood to the cabinet with the screws supplied, connect the duct with rigid metal and foil tape, wire the hood to the circuit, and test it on every speed. The two steps that cause most do-it-yourself failures are mounting the hood too high and using flexible duct. A hood mounted above 36 in over a gas range captures poorly and looks wrong, so measure twice and use the template. Flexible foil duct traps grease, cuts airflow by 30 percent or more, and is a fire hazard, so use smooth rigid metal duct and seal every joint with foil tape, not duct tape, which dries out and falls off inside a hot duct. If the hood is over 400 CFM and your home is tightly sealed, install a makeup air damper at the same time, because a powerful hood in a sealed house can backdraft a furnace or water heater and pull carbon monoxide into the living space.

Maintenance is simple but it has to happen on a schedule. Clean the baffle or mesh filters every 2 to 4 weeks in the dishwasher or with hot soapy water, and replace charcoal filters every 3 to 6 months. Wipe the inside of the hood and the grease tray every month, because grease buildup inside a hood is a fire hazard and the number one reason hoods get replaced early. Check the exterior damper twice a year: it should open freely when the fan runs and close flat when the fan is off, and a damper stuck open lets cold air pour into the kitchen all winter. A good range hood lasts 15 to 20 years, and the parts that fail first are the blower motor, which costs $100 to $250 to replace, and the control board, which costs $75 to $150. Know when to call a professional: a new duct run through the roof, any electrical work beyond a simple plug-in connection, a hood over an island where the duct and wiring have to be routed through the ceiling, or any sign that the hood is backdrafting a furnace or water heater. A professional installation is $150 to $800 depending on the complexity, and it is money well spent when a bad duct run means the hood never works properly.

Test the hood the day it is installed, because a hood that looks right can still move too little air. Hold a single sheet of paper towel up to the filters with the fan on high: a working hood should pull the towel flat against the filter and hold it there. If the towel flutters or falls, the duct is blocked, kinked, or too long, or the damper outside is stuck shut. Check the outside wall cap or roof cap while the fan runs: the damper should be open and you should feel a strong flow of air. A hood that passes the paper towel test and the damper check is moving real air, and a hood that fails either one needs the duct inspected before you cook with it.

Frequently asked questions

Keep reading

Kitchen Faucet Buying Guide: Types, Finishes and What a Good One Costs

Tips & Tricks

A good kitchen faucet costs $150 to $400 and lasts 15 to 20 years when you match the hole count, a spout reach of 8 to 9 in, and a flow rate of 1.5 to 1.8 gallons per minute; chrome and brushed nickel are the finishes that hold up longest, and a ceramic disc cartridge is the part that decides longevity.

Read the article