Article — How-To · November 10, 2026 · 15 min read

Outdoor Drainage Guide: French Drains, Grading and Keeping Water Away From Your House

Keep water away from your house with a 6 in slope over the first 10 ft, downspouts that discharge 4 to 6 ft from the foundation, and a French drain at $20 to $35 per linear foot installed for standing water that lasts more than 24 hours.

Outdoor drainage works when water is moved away from your foundation on the surface and underground: the ground should slope away from the house at 6 in over the first 10 ft, gutters should discharge at least 4 to 6 ft from the foundation, and a French drain — a gravel-filled trench with a perforated pipe — solves standing water in the yard for $20 to $35 per linear foot installed, or $10 to $15 per foot as a do-it-yourself project. A yard that holds puddles for more than 24 hours after rain has a drainage problem, and the fix is almost always grading first, gutters second, and a French drain third. Check the roof that sheds the water with the roof replacement cost guide, size the roof and gutters with the Roofing Calculator, and reuse the runoff for the garden with the rain barrel and rainwater harvesting guide.

Landscaper installing a French drain trench lined with gravel and perforated pipe beside a house foundation

How do you tell if your yard has a drainage problem?

The simplest test is the puddle test: after a normal rainstorm, walk the yard and note where water stands. Puddles that disappear within 24 hours are normal. Puddles that last more than 24 hours, or a low spot that stays soggy for days, signal a drainage problem that will kill grass, breed mosquitoes, and attract termites. Mosquitoes need only 7 to 10 days of standing water to breed, so a puddle that lasts a week is a mosquito nursery. Inside the house, the warning signs are more serious: water stains on the basement wall, a damp smell in the basement or crawl space, efflorescence — the white salty crust — on foundation walls, mold on the bottom of drywall, and a sump pump that runs constantly during rain. A basement that floods once a year is not a basement problem, it is a yard drainage problem, and the fix belongs outside, not inside.

Find the source before you dig anything. Walk the yard during a heavy rain with an umbrella and watch where the water goes: it runs off the roof into the gutters, out the downspouts, across the yard, and toward the lowest point. If the downspouts dump water 1 ft from the foundation, the water pools against the wall and seeps into the basement — and the fix is a $10 downspout extension, not a $3,000 drain. If the ground slopes toward the house instead of away from it, every rainstorm sends water to the foundation. If a neighbor's yard is higher than yours, their runoff becomes your problem, and a swale or a berm on the property line is the fix. Check the gutters too: a clogged gutter overflows in a heavy rain and dumps a sheet of water right at the foundation, and a gutter that is undersized for the roof — a 5 in gutter on a large steep roof — overflows even when it is clean. A 1,000 sq ft roof sheds about 600 gallons of water in a 1 in rainstorm, so the drainage system has to handle hundreds of gallons in a single storm, not a trickle.

What is grading, and how much slope does a yard need?

Grading is the shape of the ground around your house, and it is the first and cheapest drainage fix. The ground should slope away from the foundation at a rate of 6 in over the first 10 ft — a 5 percent grade — and continue sloping gently away from the house for at least another 10 ft. That slope is enough to carry water away from the foundation in all but the heaviest downpours. To check your grade, drive a stake at the foundation wall and another stake 10 ft out, run a string between them with a line level, and measure the drop: if the drop is less than 6 in, the grade is too flat, and if the string shows the ground rising toward the house, the grade is backwards and water is running to the foundation. A backwards grade is common in older homes where the soil has settled over decades, and it is also common where a previous owner added a patio or a walkway that trapped water against the wall.

Fixing the grade is a weekend project for most yards. You need clean fill dirt — topsoil or a clay-loam mix, not mulch or gravel — and a wheelbarrow, a shovel, and a rake. Add soil against the foundation in a wedge that is 6 in higher at the wall than it is 10 ft out, tamp it down firmly, and cover it with 2 to 3 in of topsoil and grass seed or sod. A cubic yard of fill dirt costs $25 to $50 delivered and covers about 100 sq ft at a 3 in depth, so a typical regrading job needs 3 to 5 cubic yards and costs $100 to $300 in materials. Never use mulch against the foundation to fix a grade problem: mulch holds water, attracts termites, and rots, and it will not hold a slope. Keep the soil 4 to 6 in below the siding or brick veneer — soil piled against the siding invites termites and rot. If the yard is flat and there is nowhere for the water to go, regrading alone will not work, and you need a drain. If the soil is heavy clay that absorbs water slowly, regrading helps but a French drain or a dry well may still be needed, because clay soil can take days to drain after a storm.

What is a French drain, and when do you need one?

A French drain is a gravel-filled trench with a perforated pipe at the bottom that collects groundwater and carries it away from the problem area. It is the right fix for a yard that stays soggy, a low spot that holds water, a basement that seeps after rain, or a slope that sends water toward the house. A French drain costs $20 to $35 per linear foot professionally installed, or $10 to $15 per foot as a do-it-yourself project, and a typical 50 ft drain costs $1,000 to $1,750 professionally or $500 to $750 in materials. The drain works because water follows the path of least resistance: it seeps through the gravel and into the perforated pipe, then flows downhill through the pipe to a discharge point — a street, a dry well, a storm drain, or a low corner of the yard at least 10 ft from the house. A French drain does not pump water, so the pipe must slope downhill at a minimum of 1 percent — 1 in of drop for every 8 ft of pipe — and the discharge point must be lower than the start of the drain.

Installing a French drain is a 1 to 2 day project for a 50 ft run. Dig a trench 12 in wide and 18 to 24 in deep, line it with landscape fabric, add 2 to 3 in of washed gravel, lay a 4 in perforated pipe with the holes facing down, cover it with another 8 to 12 in of gravel, wrap the fabric over the top, and backfill with soil and grass. The fabric is the detail that makes the drain last: it keeps soil from washing into the gravel and clogging the pipe, and a drain without fabric clogs in 3 to 5 years while a drain with fabric lasts 20 to 30 years. Use solid PVC pipe for the sections that carry water to the discharge point, and perforated pipe only in the collection section. The most common do-it-yourself mistake is digging the trench too shallow — a drain that is only 12 in deep collects surface water but does nothing for groundwater — and the second most common mistake is discharging the water onto a neighbor's property or into a spot where it just pools again. Check local rules before you dig: many towns require a permit for a drain that connects to a storm sewer, and you must call 811 to mark underground utilities before you dig any trench deeper than 12 in.

Downspout extension carrying rainwater away from a house foundation across a sloped lawn toward a dry well
Keep water away from your house with a 6 in slope over the first 10 ft, downspouts that discharge 4 to 6 ft from the foundation, and a French drain at $20 to $35 per linear foot installed for standing water that lasts more than 24 hours.

Gutters, downspouts, and where the roof water actually goes

The roof is the biggest source of water at the foundation, and the gutters and downspouts are the first line of defense. A 5 in K-style gutter handles a roof up to about 1,500 sq ft of drainage area per downspout in a moderate climate, while a 6 in gutter handles up to 2,500 sq ft and is the better choice for a large or steep roof and for any home in a region with heavy downpours. Downspouts should be spaced no more than 30 to 40 ft apart, and a 3 by 4 in downspout moves twice as much water as a standard 2 by 3 in downspout, so upgrading the downspouts is a cheap fix for a gutter that overflows in heavy rain. A downspout extension costs $10 to $25 and moves the discharge 4 to 6 ft from the foundation, which is the single most effective $10 drainage fix in any home. For a permanent solution, bury the downspout in a solid 4 in PVC pipe that runs 10 to 20 ft away from the house to a pop-up emitter or a dry well — a buried downspout costs $150 to $300 per downspout professionally installed and keeps the yard clean and the water far from the foundation.

Clean the gutters at least twice a year, in spring and fall, and more often if large trees overhang the roof. A clogged gutter overflows in a heavy rain and dumps a sheet of water right at the foundation, which is exactly the problem the gutters exist to prevent. Gutter guards cost $5 to $15 per linear foot installed and reduce cleaning to once a year, but they do not eliminate it — fine debris and roof grit still get through, and a guard that is not cleaned becomes a dam. Check the gutter slope while you are up there: gutters should slope 1/4 in per 10 ft toward the downspout, and a gutter that holds standing water after rain is either clogged or sagging. A sagging gutter needs new hangers every 24 to 36 in, and a gutter that pulls away from the fascia needs longer screws into the rafter tails, not just a new spike. If the roof has no gutters at all, which is common on some older homes and on homes with a wide overhang, the water sheets off the roof edge and lands 2 to 3 ft from the foundation — adding gutters costs $5 to $12 per linear foot installed and is one of the highest-value drainage upgrades a homeowner can make.

Dry wells, swales, and the other drainage tools

A dry well is an underground pit filled with gravel that collects water from a French drain or a downspout and lets it soak slowly into the soil. A dry well costs $500 to $1,500 installed, holds 50 to 100 gallons depending on its size, and works well in sandy or loamy soil that absorbs water quickly. It does not work well in heavy clay soil, because the water has nowhere to soak to — in clay, a dry well fills up in the first storm and stays full. A dry well should sit at least 10 ft from the foundation and at least 10 ft from any septic system, and it needs an overflow outlet so a storm that exceeds its capacity does not flood the yard. A swale is a shallow, wide ditch — 6 to 12 in deep and 2 to 3 ft wide — that carries surface water across the yard to a discharge point. A swale costs $5 to $15 per linear foot to dig and grade, it looks like a gentle dip in the lawn when it is covered with grass, and it is the best fix for a yard that is flat and has nowhere for water to go. A berm is the opposite: a low mound of soil, 6 to 12 in high, that blocks water from flowing toward the house, and it is the right tool when a neighbor's yard is higher than yours.

A catch basin is a box set into the ground at a low spot, with a grate on top and a solid pipe that carries the collected water away. A catch basin costs $150 to $400 installed and is the best fix for a single low spot that collects water, such as the bottom of a driveway or the corner of a patio. A channel drain, also called a trench drain, is a long narrow grate set into a driveway or a patio that catches water before it reaches the garage or the house — it costs $30 to $60 per linear foot installed and is the right tool for a driveway that slopes toward the garage. A sump pump is the last resort for a basement that floods despite good exterior drainage: it sits in a pit in the basement floor, pumps water out through a discharge pipe, and costs $1,000 to $2,500 installed with a battery backup. A sump pump that runs constantly is a sign that the exterior drainage is not working, and fixing the grading and gutters outside will usually cut the pump's workload by half or more. The right tool depends on the problem: surface water needs a swale or a catch basin, groundwater needs a French drain, roof water needs gutters and downspouts, and a basement that floods needs all of them fixed in that order.

How much does yard drainage cost, and when do you call a professional?

Yard drainage costs range from $10 for a downspout extension to $5,000 or more for a complete system, and most homeowners spend $1,000 to $3,000 to fix a real drainage problem. The cheap fixes come first: regrading costs $100 to $300 in materials, a downspout extension costs $10 to $25, gutter cleaning costs $100 to $250 professionally or nothing if you do it yourself, and a swale costs $200 to $600 for a typical 50 ft run. A French drain costs $1,000 to $1,750 for a 50 ft run professionally installed or $500 to $750 as a do-it-yourself project. A dry well costs $500 to $1,500, a catch basin costs $150 to $400, and a buried downspout system costs $150 to $300 per downspout. A complete drainage system — regrading, gutters, a French drain, and a dry well — costs $3,000 to $6,000 for a typical suburban lot, and it is money well spent when the alternative is a flooded basement that costs $5,000 to $15,000 to repair and a foundation that cracks from years of water pressure.

Call a professional when the problem involves the foundation, the neighbors, or the street. A drainage contractor should handle any drain that connects to a storm sewer, any grading change that affects a neighbor's property, any yard with a slope steeper than 15 percent, and any basement that floods regularly — these jobs need permits, surveys, and equipment that a homeowner does not have. A landscape drainage contractor charges $50 to $100 per hour, and a site visit and a written plan costs $150 to $300, which is worth it for a problem you cannot diagnose yourself. Do it yourself when the fix is grading, a downspout extension, a swale, or a short French drain in a yard with no utilities in the way — and always call 811 to mark underground utilities before you dig, because hitting a gas line or a buried electric cable turns a weekend project into an emergency. After any drainage fix, test it: wait for the next heavy rain, walk the yard, and check that the puddles are gone, the basement is dry, and the discharge point is working. A drainage fix that you do not test is a drainage fix you have not finished.

Frequently asked questions

Keep reading

Rain Barrel and Rainwater Harvesting Guide for Homeowners

How-To

Every inch of rain on a 1,000 sq ft roof produces about 600 gallons of runoff, so a 55-gallon barrel fills with just one-tenth of an inch of rain — a good barrel costs $80 to $200, a do-it-yourself build costs $30 to $60, and the water is free and better for plants than chlorinated tap water.

Read the article