Article — Tips & Tricks · November 9, 2026 · 15 min read
Home Security Camera Placement Guide: Coverage, Height and Blind Spots
Put your first camera at the front door, your second at the back door, and mount both 8 to 10 ft high and angled down 30 to 45 degrees — those two cameras cover the entry points burglars use most, and a 4-camera system costs $300 to $800 for a good do-it-yourself kit.
Put your first security camera at the front door, your second at the back door, and mount both 8 to 10 ft high and angled down 30 to 45 degrees — those two cameras cover the entry points burglars use most, and a 4-camera system covering the front door, back door, driveway, and first-floor windows costs $300 to $800 for a good do-it-yourself kit. About a third of burglars enter through the front door and another fifth through the back door or a first-floor window, so a camera pointed at a side yard while the front door is unguarded is money in the wrong place. Plan the layout with the Square Footage Calculator to work out the area each camera must cover, use the Wall Area Calculator when you are mounting on siding or brick, and see how cameras fit into a wider exterior upgrade in the outdoor lighting guide. Cameras are one part of the system: the home security system buying guide compares sensors, monitoring and the full kit.
Where should you put security cameras first?
Start with the front door, then the back door, then the driveway and garage, because those three spots cover the entries burglars actually use. Roughly a third of burglaries begin at the front door — many burglars simply knock, and if nobody answers they try the handle — and another fifth come through a back door or a first-floor window. A camera over the front door should capture faces, not just the top of a head, which is why the doorbell camera has become so popular: it sits at eye level, records everyone who approaches, and doubles as an intercom. If you can only afford one camera, put it at the front door. If you can afford two, the second goes at the back door or the rear patio, which is the entry most hidden from the street and the one burglars prefer when they want privacy.
After the doors, cover the driveway and the garage, then the ground-floor windows on the sides of the house that face a street, alley, or neighbor. A driveway camera catches license plates and faces as cars arrive, and a camera on the garage catches the side door and the windows that burglars use when the main doors are locked. The fourth priority is the backyard and any gate, because a fenced yard feels private to a burglar too — a camera over the back gate tells you the moment someone climbs it. Count the cameras you need by walking the perimeter and marking every ground-level entry point: most single-story homes need 4 to 6 cameras, a two-story home with a detached garage needs 6 to 8. A camera in the backyard is worth more than a second camera on the front porch, and a camera watching the side gate is worth more than one watching the front lawn.
How high should security cameras be mounted?
Mount outdoor security cameras 8 to 10 ft high, angled down 30 to 45 degrees, because that height is high enough that a burglar cannot reach up and rip the camera down or cover the lens, and low enough that the camera still captures faces instead of the tops of heads. A camera mounted at 15 ft or higher on a second-story eave sees the yard beautifully and sees nobody's face at all — the angle is too steep, and a person in a baseball cap becomes an unidentifiable blur. A camera mounted at 6 ft captures perfect faces but can be smashed, spray-painted, or simply turned away by anyone who notices it. The 8 to 10 ft range is the sweet spot, and it works on a porch column, a garage wall, or a soffit mount.
The angle matters as much as the height. Tilt the camera down so its field of view covers the walkway or driveway from about 5 ft out to 30 ft away, and keep the horizon in the top third of the frame — if half the image is sky, you are wasting resolution on clouds. Aim the camera slightly toward the approach path rather than straight out, so a person walks across the frame instead of directly toward the lens; a person walking across the frame gives the camera more time to capture a clear face, and motion detection triggers more reliably. Keep the camera out of direct sunlight in the morning and evening, because a lens staring into a low sun produces a white-out image exactly when burglaries are most likely. And never point a camera at a neighbor's windows or backyard: in most states that is legal only if it is incidental, and a camera that clearly watches a neighbor's property invites a complaint or a lawsuit that no amount of security is worth.
How to eliminate blind spots and overlap coverage
Eliminate blind spots by mounting cameras in the corners of the house and aiming them along the walls, so each camera's field of view overlaps the next one by 10 to 20 percent. A camera in a corner sees two walls at once, which means one camera can cover the front door and the side gate, or the driveway and the garage door. Walk the perimeter at night with a flashlight and mark the spots where two cameras' views do not meet — those gaps are the blind spots, and they are almost always at the side of the house between the front and back cameras, or behind a large shrub, a fence, or an air conditioning unit. Move the cameras to the corners, trim the shrubs, and add a camera to the side of the house if the gap is wider than 10 ft. A burglar who knows cameras exist will look for the gap, so the gap is the place that matters most.
Overlap is not wasted coverage, it is insurance. When two cameras see the same area from different angles, a person who blocks one camera's view with a hat or a raised hood is still caught by the other, and a camera that goes offline still leaves the area covered. Set each camera's field of view to about 100 to 110 degrees for a wide-angle camera, and remember that a wide-angle lens trades detail for coverage: a 2K camera with a 110-degree lens can identify a face at 15 to 20 ft, but at 40 ft it can only tell you someone is there. For long driveways or large yards, use a camera with a varifocal or zoom lens, or add a second camera closer to the far end. Test the layout before you drill anything: prop the cameras up with painter's tape, walk the routes a burglar would take, and watch the live feed on your phone to see what each camera actually captures.
Indoor cameras: what to cover and what to skip
Indoor cameras belong at the main entry points and in the common living areas, and they do not belong in bedrooms or bathrooms — ever. The most useful indoor camera sits in the entryway or living room facing the front door, because it catches anyone who gets past the outdoor cameras and records what they take and which direction they go. A second indoor camera in the main hallway covers the bedrooms and the back of the house, and a camera in the garage covers the interior door and the tools. Skip the bedrooms, the bathrooms, and the kids' rooms entirely: the security value is tiny, the privacy risk is enormous, and in many states recording in those rooms can be illegal even in your own home. If you have a babysitter, a cleaner, or a dog walker, tell them the cameras exist and where they are — hidden indoor cameras in a home with regular visitors create legal and trust problems that no footage is worth.
Place indoor cameras on a shelf or a high corner rather than on a table at eye level, where they are easy to spot and easy to unplug. A camera mounted 7 to 8 ft high in a corner sees the whole room and stays out of the way, and a camera with a privacy shutter or a physical lens cover lets you turn it off when you are home and turn it back on when you leave. Use the camera's motion zones to ignore the area where the dog sleeps and the spot where the curtains move in the breeze, because false alerts are the fastest way to stop checking alerts at all. And if the camera records audio, remember that audio recording has stricter laws than video in many states — a camera that records sound in a two-party consent state without clear notice can create a legal problem for the homeowner who installed it.
Wiring, Wi-Fi and power: what placement depends on
Placement is limited by power and signal before it is limited by anything else, so check both before you drill a single hole. Wired PoE cameras run on a single Ethernet cable that carries power and video up to 300 ft, which makes them the most reliable choice for a permanent system, but every camera needs a cable run back to the recorder, and that means drilling through walls and running cable through the attic or crawl space. Wireless cameras are easier to place but need a strong Wi-Fi signal: a camera showing one bar of signal will drop frames, miss motion events, and eat its battery in a week. Test the signal at each planned mount point with your phone before you buy — if your phone shows less than two bars, add a Wi-Fi extender or a mesh node halfway to the camera, or choose a wired camera for that spot.
Battery cameras last 2 to 6 months per charge in a low-traffic spot, but only 3 to 6 weeks at a busy front door that triggers 50 times a day, so plan on a solar panel add-on at $30 to $50 for any camera you do not want to climb a ladder to recharge. Solar panels need 4 to 6 hours of direct sun a day to keep up, which rules out a shaded north-facing wall. Floodlight cameras solve the power problem by wiring into an existing light fixture, and they solve the night vision problem at the same time, but they only work where a fixture already exists or where you are willing to run new wiring. For any camera mounted above 10 ft, think about how you will reach it to clean the lens, swap a battery, or reset it — a camera that needs a 20 ft ladder for basic maintenance will not get maintained, and a dirty lens at night is worse than no camera at all.
Night vision, motion zones and cutting false alerts
Night vision is where cheap cameras fail, so test it before you commit to a system: a good infrared camera sees clearly to 25 to 30 ft in total darkness, while a budget camera goes blind past 10 ft and turns every moving shadow into a gray smear. Color night vision, which uses a bright white light or a very sensitive sensor, gives you far more useful footage — a red jacket is a red jacket, not a gray blob — but it needs some ambient light to work, and a camera that switches on a spotlight every time a cat walks past will annoy the neighbors. The best setup is a camera with strong infrared plus a motion-activated light on a separate fixture, so the light helps the camera without blinding it. If you are already planning exterior work, check the exterior painting cost guide for the price of repainting the wall or trim a camera mount will disturb, and paint first so the mount sits on a fresh, sealed surface.
False alerts kill security systems faster than any burglar. A camera that sends 40 notifications a day — the mail carrier, the dog, the tree branch, the passing car — trains you to ignore it, and the one alert that matters gets swiped away with the rest. Set motion zones to cover only the walkway, the driveway, and the doors, and exclude the street, the sidewalk, and the neighbor's yard. Set the sensitivity so a person triggers it but a cat does not, and use person detection if the camera offers it — most modern cameras can tell a person from a vehicle from an animal, and that single feature cuts false alerts by 80 percent or more. Schedule the alerts: full sensitivity at night and when you are away, reduced sensitivity during the day when the house is busy. And keep the recordings for at least 30 days on a local drive or a cloud plan, because police often ask for footage a week or two after an incident, and a 7-day cloud plan may already have deleted it.
Frequently asked questions
Most single-story homes need 4 to 6 cameras: front door, back door, driveway or garage, and one or two covering first-floor windows and side gates. A two-story home with a detached garage needs 6 to 8 cameras. Start with the front door, then the back door, then the driveway — those three spots cover the entries burglars use most. Add cameras at the corners of the house to cover the sides, and add one more for any blind spot wider than 10 ft, such as a side gate hidden behind a fence or shrub.
Mount outdoor security cameras 8 to 10 ft high, angled down 30 to 45 degrees. That height is high enough that a burglar cannot reach up and rip the camera down or cover the lens, and low enough that the camera captures faces instead of the tops of heads. A camera mounted at 15 ft or higher sees the yard well but cannot identify a face, especially if the person is wearing a hat. A camera at 6 ft captures great faces but is easy to smash or turn away.
A security camera should not be aimed at a neighbor’s windows, backyard, or any area where they have a reasonable expectation of privacy. In most states, incidental capture of a neighbor’s property at the edge of the frame is legal, but a camera clearly pointed at their home invites a complaint or a lawsuit. Aim cameras at your own doors, driveway, and walkways, keep the neighbor’s property out of the center of the frame, and use privacy masking in the camera software to black out their windows if they appear at the edge of the view.
Not always. Many cameras record to a local microSD card or a network video recorder with no monthly fee, and a 128 GB card holds about 2 to 4 weeks of motion-triggered footage from one camera. Cloud subscriptions, usually $3 to $10 per camera per month or $10 to $15 for unlimited cameras, add off-site backup, longer storage, and smart features such as person detection and package alerts. A local recorder plus a single cloud camera at the front door gives most homeowners the best balance of cost and protection.
Wired PoE cameras are better for a permanent system because they never lose Wi-Fi signal, never need a battery charged, and record continuously over a single Ethernet cable up to 300 ft long. Wireless cameras are better when running cable is impractical, such as on a detached garage or a rental property, but they need a strong Wi-Fi signal and their batteries last only 3 to 6 weeks at a busy front door. For a new installation where you can run cable through the attic, wired is the more reliable choice; for a quick add-on or a spot with no cable access, wireless with a solar panel is the practical one.
Keep reading
Outdoor Lighting Guide: Path, Deck and Security Lighting That Actually Works
How-ToPath lights low and staggered 6 to 8 ft apart, deck lights marking steps and edges with no glare, and motion security lights aimed down at approaches — a single blazing floodlight hides more than it reveals.
Read the article