Article — How-To · November 13, 2026 · 15 min read

Gutter Replacement Cost: Materials, Linear Foot Prices and When to Replace

Gutter replacement costs $4 to $9 per linear foot for seamless aluminum, so a typical home runs $1,000 to $2,500, while vinyl runs $600 to $1,500 and copper runs $2,500 to $6,000 for a 50-year system.

Gutter replacement costs $4 to $9 per linear foot installed for seamless aluminum, $3 to $6 per linear foot for vinyl, and $15 to $30 per linear foot for copper, so a typical home with 150 to 200 linear feet of gutter runs $1,000 to $2,500 in aluminum, $600 to $1,500 in vinyl, and $2,500 to $6,000 in copper, including downspouts. The length of gutter, the material, and the height of the house decide the total: a single-story ranch with 150 linear feet is the cheapest job, and a two-story home with 200 linear feet and steep rooflines costs 20 to 40 percent more. Downspouts add $5 to $10 per linear foot, gutter guards add $7 to $20 per linear foot, and removing the old gutters adds $100 to $300. Price the roof work around it with the Roofing Calculator, compare a full roof job in the roof replacement cost guide, and check the warning signs in the roof replacement signs guide and the gutter cleaning and maintenance guide.

Worker installing new white aluminum gutters on a two-story house from a ladder, with a toolbox and gutter sections on the ground below

How much does gutter replacement cost?

Gutter replacement costs $4 to $9 per linear foot installed for seamless aluminum, which is the material on most American homes, and a typical home with 150 to 200 linear feet of gutter runs $1,000 to $2,500 in aluminum, including downspouts and removal of the old gutters. Vinyl gutters cost $3 to $6 per linear foot, or $600 to $1,500 for a typical home, but they crack in cold weather and fade in the sun, so they last 10 to 20 years against 20 to 30 years for aluminum. Steel gutters cost $8 to $12 per linear foot, or $1,500 to $2,500 for a typical home, and they are the strongest option, but they rust if the coating is scratched. Copper gutters cost $15 to $30 per linear foot, or $2,500 to $6,000 for a typical home, and they last 50 years or more and develop a green patina that suits historic and high-end homes. Zinc gutters cost $12 to $25 per linear foot and last 40 to 50 years, but they are rare in the United States and hard to find an installer for.

The total depends on more than the per-foot price. A single-story home with 150 linear feet of gutter and 4 downspouts runs $900 to $1,800 in aluminum, while a two-story home with 200 linear feet and 6 downspouts runs $1,500 to $2,500, because the crew needs taller ladders, more setup time, and more safety equipment. Steep rooflines, corners, and long runs add cost: every inside or outside corner adds $25 to $50 in fittings and labor, and a run over 40 ft needs an extra downspout to drain properly. Removing the old gutters costs $100 to $300, fascia board repair costs $200 to $600 where the old gutters rotted the wood behind them, and gutter guards add $1,000 to $4,000 for a typical home. Get three quotes that break out the gutter price, the downspout price, the removal price, and the guard price separately, and make sure every quote names the material, the gauge, and the gutter size, because a quote that just says "gutters" can mean thin sectional vinyl or heavy seamless aluminum, and the difference is a decade of life.

Which gutter material should you choose?

Seamless aluminum is the best gutter material for most homeowners, because it costs $4 to $9 per linear foot installed, lasts 20 to 30 years, never rusts, and comes in more than 30 colors that match the trim and siding of most homes. Seamless gutters are formed on site from a single coil of aluminum, so they have joints only at the corners and the downspouts, and fewer joints mean fewer leaks. The standard thickness is 0.027 in, and the heavy-duty option is 0.032 in, which costs about 20 percent more and resists dents from ladders and falling branches. Choose the 0.032 in gauge if you live where ice, hail, or heavy tree cover is common, and choose 6 in gutters instead of the standard 5 in if your roof is steep or your area gets heavy rain, because 6 in gutters carry about 40 percent more water than 5 in gutters.

Vinyl is the cheapest material at $3 to $6 per linear foot, and it suits a mild climate and a tight budget, but it becomes brittle below freezing, sags in summer heat, and fades within 5 to 10 years. Vinyl gutters come in 10 ft sections that snap together, and every joint is a future leak, so a vinyl gutter system has 15 to 20 joints on a typical home against 4 to 6 on a seamless aluminum system. Steel costs $8 to $12 per linear foot and is the strongest material, which suits homes under heavy trees or in hail country, but a scratch in the coating rusts within a year, so steel needs touch-up paint wherever a ladder rests against it. Copper costs $15 to $30 per linear foot, lasts 50 years or more, needs no paint, and suits historic homes, brick homes, and homes where the gutters are a design feature rather than a background detail. For most homes, the answer is seamless aluminum in 0.032 in gauge and 6 in size, with copper reserved for the front of the house as an accent where the budget allows it.

How do you know your gutters need replacing instead of a repair?

Replace your gutters when they are more than 20 years old, when they sag, split, or pull away from the house in more than one place, and when a repair would cost more than half the price of a replacement. A single leak at a joint can be fixed for $50 to $150 with sealant and a new bracket, and a single cracked section can be replaced for $100 to $250, but a system with leaks at five joints, rust in three places, and a sagging run needs a replacement, not a repair. Look for the warning signs: water pouring over the edge in a normal rain means the gutters are undersized or clogged; water staining on the siding below the gutters means a joint is leaking; peeling paint or rotting wood on the fascia means water has been running behind the gutter for months; and a gutter that pulls away from the house means the hangers have failed or the fascia has rotted.

Check the ground after a heavy rain: a trench or a washed-out bed of mulch below a gutter means the downspout is dumping water at the foundation instead of carrying it away, and a wet basement wall on the same side of the house means the gutters have been failing for a while. Check the gutters themselves in dry weather: rust spots, holes, and cracks in the bottom of the trough mean the metal is failing, and a gutter that holds standing water a day after the rain means it was installed without enough slope. Gutters need a slope of 1/4 in per 10 ft toward the downspout, and a gutter that is level or sloped the wrong way will hold water, breed mosquitoes, and add 8 lbs per gallon of standing weight that pulls the hangers loose. The decision rule is simple: one problem is a repair, three problems are a replacement, and any gutter over 20 years old with a second problem is a replacement. A replacement costs $1,000 to $2,500 in aluminum, and a foundation repair from failed gutters costs $5,000 to $15,000, so replacing a failing system is the cheap option.

How are gutters measured and priced per linear foot?

Gutters are measured in linear feet along the roof edge, and a typical American home has 150 to 200 linear feet of gutter, with one downspout for every 30 to 40 ft of gutter. Measure each roof edge with a tape measure from the ground, or estimate from the footprint: a 1,500 sq ft single-story ranch with a simple gable roof has about 120 to 150 linear feet, a 2,000 sq ft two-story home has about 150 to 200 linear feet, and a 3,000 sq ft home with a complex roof has 200 to 300 linear feet. Count the downspouts separately: a downspout costs $5 to $10 per linear foot, and a two-story downspout is 20 to 25 ft long, so each downspout adds $100 to $250 to the job. A home needs one downspout for every 30 to 40 ft of gutter, so a 200 ft system needs 5 to 7 downspouts, and a run longer than 40 ft without a downspout will overflow in a heavy rain no matter how big the gutter is.

Installers price by the linear foot because the material, the hangers, and the labor all scale with length, but the per-foot price assumes a standard job: a single-story or two-story home, easy ladder access, and sound fascia. The price climbs when the crew needs a lift for a three-story section, when the roof is steep and the crew works from a harness, and when the fascia is rotted and needs replacing at $6 to $10 per linear foot. Corners cost extra because each one needs a mitered fitting and extra sealing, and a home with 8 corners costs $200 to $400 more than a home with 4 corners for the same total length. When you compare quotes, divide each total by the linear feet to get the real per-foot price, and check that every quote counts the same length: a quote that measures 150 ft against a quote that measures 180 ft is not a cheaper price, it is a shorter measurement. Walk the house with the estimator and agree on the length, the downspout count, and the gutter size before anyone starts, and get the measurement in writing on the quote.

What does gutter replacement involve step by step?

Gutter replacement takes 1 to 2 days for a typical home, and the steps are: remove the old gutters, inspect and repair the fascia, form and hang the new gutters, install the downspouts, and test the system with water. The crew starts by removing the old gutters and downspouts, which takes 2 to 4 hours, and hauls the old material away for recycling, because aluminum scrap is worth $0.30 to $0.60 per pound. Next the crew inspects the fascia board behind the gutters: sound fascia gets a coat of primer where the old hangers left holes, and rotted fascia gets cut out and replaced at $6 to $10 per linear foot. The new gutters are formed on site from a coil of aluminum in a gutter machine mounted on the truck, which makes each run a single seamless piece cut to the exact length of the roof edge, with no joints along the run.

The crew hangs the gutters with hidden hangers screwed into the fascia every 24 to 36 in, setting the slope at 1/4 in per 10 ft toward the downspout, and checks the slope with a level on every run. The downspouts are installed next, screwed to the wall with straps every 6 to 8 ft, and each downspout gets an elbow at the bottom that directs water at least 4 to 6 ft away from the foundation, or connects to an underground drain or a splash block. The crew seals every corner and end cap with a gutter sealant rated for exterior use, and then tests the system by running a garden hose into the gutter at the far end from the downspout: the water should flow smoothly to the downspout with no pooling and no drips at the joints. The crew should leave the yard clean, with no old screws or gutter pieces in the grass, and should show you the slope and the downspout flow before they leave. A job that skips the water test is a job that finds its leaks in the first storm, when the crew is already gone.

Should you add gutter guards when you replace your gutters?

Add gutter guards when you replace your gutters if your home sits under trees, because guards cut gutter cleaning from twice a year to once every 2 to 3 years, and they cost $7 to $20 per linear foot installed, or $1,000 to $4,000 for a typical home. Mesh guards cost $7 to $12 per linear foot and keep out leaves and twigs while letting water through, which suits most homes. Micromesh guards cost $15 to $20 per linear foot and keep out pine needles, seeds, and shingle grit as well, which suits homes under pine trees. Reverse-curve guards cost $10 to $20 per linear foot and use surface tension to pull water into the gutter while leaves slide off the edge, but they are visible from the ground and they can overshoot in a heavy downpour on a steep roof. Brush guards and foam inserts cost $3 to $6 per linear foot, but they clog, grow mold, and need replacing every 2 to 3 years, so they are a false economy.

Do not add gutter guards if your home has no trees within 50 ft, because the guards cost $1,000 or more and save almost no cleaning, and do not add them as a fix for undersized gutters, because a 5 in gutter with guards still overflows in a heavy rain where a 6 in gutter without guards would not. Guards do not make gutters maintenance-free: fine grit still gets through the mesh and settles in the bottom of the trough, so a guarded gutter still needs a flush and an inspection every 2 to 3 years. Guards also void some roofing warranties if they lift the bottom row of shingles, so ask the installer how the guards attach and check the shingle warranty before you commit. The best time to add guards is during a replacement, because the crew is already on the ladders and the guard installation adds only a few hours to the job, against a full day if the crew has to come back later. For a home under mature oaks or maples, guards pay for themselves in 3 to 5 years of saved cleanings at $150 to $300 per cleaning.

Close-up of a seamless aluminum gutter and downspout corner joint on a house, showing the sealed miter and the hanger brackets
Gutter replacement costs $4 to $9 per linear foot for seamless aluminum, so a typical home runs $1,000 to $2,500, with the material, the length of gutter, and the height of the house deciding the total, and copper running $15 to $30 per linear foot for a 50-year system.

How do you maintain new gutters so they last 20 years?

Maintain new gutters with a cleaning twice a year, in late spring and late fall, and a 10-minute inspection after every major storm, and a seamless aluminum system will last 20 to 30 years. Clean the troughs by scooping out leaves and grit with a gutter scoop or a gloved hand, flushing the run with a garden hose, and checking that water flows freely to the downspout with no pooling. Check the downspouts by running the hose into the top: if the water backs up, the downspout is clogged, and a plumber's snake or a high-pressure nozzle clears most clogs in 10 minutes. Inspect the hangers every fall: a hanger that has pulled loose lets the gutter sag, and a sagging gutter holds water, which adds weight and pulls more hangers loose, so tighten or replace a loose hanger as soon as you see it.

Check the sealant at the corners and end caps every year, because the sealant shrinks and cracks after 5 to 7 years, and a $10 tube of gutter sealant applied to a dry joint prevents a leak that would rot the fascia. Keep trees trimmed so no branch touches the gutter, because a branch rubbing in the wind wears through the aluminum coating and starts a rust spot on steel or a dent on aluminum. In cold climates, keep the attic insulated and ventilated so ice dams do not form, because an ice dam lifts the gutter off the fascia and the weight of the ice tears the hangers out. A gutter system that is cleaned twice a year and inspected after storms costs $0 to $300 a year to maintain. A system that is ignored clogs, overflows, rots the fascia, and dumps water at the foundation, and the repair bill starts at $2,000 for fascia and siding and climbs to $5,000 to $15,000 for foundation work. The cleaning takes 2 hours with a ladder and a scoop, or $150 to $300 for a professional cleaning.

Common gutter replacement mistakes and how to avoid them

The most common gutter replacement mistake is installing gutters with no slope: a level gutter holds standing water, breeds mosquitoes, and adds 8 lbs per gallon of weight that pulls the hangers loose within a year. The second mistake is too few downspouts: a run over 40 ft with one downspout overflows in a heavy rain, and the fix is a second downspout, not a bigger gutter. The third mistake is choosing the wrong size: a 5 in gutter on a steep roof in a heavy-rain area overflows where a 6 in gutter would cope, and the upgrade costs only 20 percent more. The fourth mistake is skipping the fascia repair: new gutters screwed into rotted fascia pull loose in the first storm, and the crew has to come back to replace the fascia and rehang the gutters.

The fifth mistake is hiring an installer who forms sectional gutters instead of seamless ones: sectional gutters have a joint every 10 ft, and every joint is a future leak, while seamless gutters have joints only at the corners. The sixth mistake is letting the downspouts dump water at the foundation: every downspout needs an elbow or an extension that carries water at least 4 to 6 ft from the house, or an underground drain. The seventh mistake is paying in full before the water test: hold back 10 to 20 percent until the crew runs a hose through the system and shows you the water flowing freely with no leaks. Avoid all of these by checking the slope with a level yourself, counting the downspouts on the quote, walking the house with the estimator, and watching the water test before you pay the final amount. A gutter system installed correctly is invisible for 20 years; a system installed wrong announces itself in the first storm.

Frequently asked questions

Keep reading

Gutter Cleaning and Maintenance: How Often, What It Costs, and When to Call a Pro

How-To

Clean gutters twice a year — late spring and late autumn — and after any major storm; a typical single-story home costs $100 to $250 professionally, and overflowing gutters are a foundation problem, not just a cosmetic one.

Read the article

Roof Replacement Cost: 7 Signs Your Roof Is Done — and What a New One Costs

Tips & Tricks

Replace your roof when three or more of these seven signs appear together: curling, cupping or granule-bare shingles, daylight or water stains in the attic, and an asphalt roof past 20 years. What a new roof costs, and which quote items actually matter.

Read the article