Article — How-To · November 11, 2026 · 15 min read

Egress Window Guide: Code Rules, Sizes and Installation Costs

An egress window costs $1,000 to $3,000 for a standard installation or $3,000 to $7,000 with a new well and drain, and code requires at least 5.7 sq ft of clear opening, 20 in wide, 24 in tall, and a sill no more than 44 in above the floor.

An egress window costs $1,000 to $3,000 for a standard installation in an existing basement wall, $3,000 to $7,000 when the job needs a new window well, excavation, and a drain, and it is required by building code in every basement bedroom and every basement living space used for sleeping. The code minimums are clear: at least 5.7 sq ft of clear opening, at least 20 in wide, at least 24 in tall, and a sill no more than 44 in above the floor. An egress window is not a nice-to-have — it is the second way out of a basement bedroom in a fire, and a basement bedroom without one cannot legally be listed as a bedroom. Price the window work with the window replacement cost guide, size the insulation for the finished basement with the Insulation Calculator, and plan the full basement project with the basement finishing guide.

New egress window with a casement opening and a steel window well with a ladder, set into a basement foundation wall

What are the egress window code requirements?

The International Residential Code requires every basement bedroom and every basement space used for sleeping to have an egress window with a minimum clear opening of 5.7 sq ft, a minimum clear width of 20 in, a minimum clear height of 24 in, and a sill height no more than 44 in above the floor. The clear opening is the space you can actually climb through when the window is fully open, not the size of the window frame, and the 5.7 sq ft minimum can be reduced to 5.0 sq ft for a window at grade level, where the sill is at or near the ground outside. The window must open from the inside without a key, a tool, or special knowledge, which means a window with a crank that is hard to reach, a latch that sticks, or a lock that needs a key does not meet code. These requirements apply to every bedroom in a basement, whether the basement was finished last year or 30 years ago, and a home inspector will flag a basement bedroom without a legal egress window every single time.

The window well has its own code requirements, because a window you cannot climb out of is not an egress window. The well must be at least 9 sq ft in area with a minimum dimension of 36 in in both directions, which means a well that is 36 in wide and 36 in deep from the wall is the smallest that meets code. If the well is deeper than 44 in, it must have a permanently attached ladder or steps that do not block the window opening, and the ladder must be at least 12 in wide with rungs spaced no more than 18 in apart. The well must drain, either to the foundation drain tile or to a separate drain, because a well that fills with water in a storm is a basement flooding problem and a safety hazard. Local codes can be stricter than the International Residential Code, so check with your building department before you order a window: some jurisdictions require a larger opening, a ladder in a shallower well, or a specific type of window. A permit is required for an egress window in almost every jurisdiction, because the job cuts a new opening in a foundation wall, and the permit costs $100 to $300 and includes an inspection of the opening, the lintel, and the well drain.

What size egress window do I need?

A standard egress window is 36 in wide by 48 in tall for a casement window, which is the most common choice, because a casement window opens fully on a hinge and gives you the entire opening to climb through. A 36 by 48 in casement window with a clear opening of about 32 by 44 in gives roughly 9.8 sq ft of clear opening, which is well above the 5.7 sq ft code minimum and comfortable for an adult to climb through. A double-hung window is a poor choice for egress, because only half the window opens at a time: a 36 by 48 in double-hung window has a clear opening of only about 32 by 20 in, or 4.4 sq ft, which fails the code minimum, so a double-hung window has to be much larger — typically 48 by 60 in — to meet the 5.7 sq ft requirement. A sliding window is also a poor choice for the same reason, because only half the window opens, and a sliding egress window needs to be at least 48 in wide to pass. A casement window is the right choice for almost every basement, because it opens fully, it meets code at the smallest size, and it is the easiest window to climb through in an emergency.

The sill height is the measurement that catches most homeowners off guard. The bottom of the clear opening must be no more than 44 in above the basement floor, which means the window has to sit low in the wall, and in a basement with a 7 to 8 ft ceiling, the window will be close to the floor. If the basement floor is below grade, the window well outside has to be deep enough that the window sits at the right height, and a well deeper than 44 in needs a ladder. Measure the basement floor to the outside grade before you order: if the grade outside is 5 ft above the basement floor, the well will be 5 ft deep, the window will be 5 ft below grade, and the well needs a ladder and a drain. A window that is too small, too high, or blocked by a well that is too narrow does not meet code, and a home inspector will flag it, which means the basement bedroom cannot be listed as a bedroom when you sell the house. Before you order, mark the opening on the inside wall with painter's tape at the exact size and height, and climb through the taped outline to check that an adult can actually get through it — it costs nothing and catches the size mistakes that a tape measure alone misses.

How much does an egress window cost?

An egress window costs $1,000 to $3,000 for a standard installation in an existing basement wall where the opening already exists or only needs enlarging, $2,500 to $5,000 for a new opening cut into a concrete or block foundation wall, and $3,000 to $7,000 for a full installation with a new window well, excavation, a drain, and a ladder. The window itself costs $300 to $800 for a standard 36 by 48 in casement window, $500 to $1,200 for a larger or premium window with a better lock and a low-E coating, and $800 to $1,500 for a custom-size window. Cutting the opening in a concrete foundation wall costs $800 to $1,500, and installing a steel lintel above the opening, which carries the weight of the wall above the window, costs $200 to $500. A prefabricated steel or composite window well costs $200 to $600, excavation costs $500 to $1,500 depending on the soil and the access, and a drain tied to the foundation drain tile costs $200 to $500. The permit costs $100 to $300, and the inspection is included.

The total cost of ownership is what matters, because an egress window is a safety feature and a value feature at the same time. A basement bedroom without a legal egress window cannot be listed as a bedroom, which means a 3-bedroom house with a basement bedroom that has no egress window is listed as a 2-bedroom house, and the difference in sale price is typically $10,000 to $30,000 depending on the market. An egress window that costs $3,000 to $5,000 can pay for itself several times over at sale, and it also brings natural light into the basement, which makes the space feel bigger and more livable. The hidden costs catch buyers off guard: if the foundation wall is poured concrete rather than block, cutting the opening costs $300 to $500 more; if the soil is rocky or the access is tight, excavation costs $500 to $1,000 more; and if the well drain cannot tie into the foundation drain tile, a separate sump or dry well costs $500 to $1,000. Budget $50 to $100 a year for maintenance: a fresh coat of paint on the well, a check of the drain after heavy rain, and a test of the window latch every 6 months to make sure it opens smoothly.

Close-up of an egress window well with a polycarbonate cover, gravel bed, and a steel ladder leading up to grade level
An egress window costs $1,000 to $3,000 for a standard installation or $3,000 to $7,000 with a new well and drain, and code requires at least 5.7 sq ft of clear opening, 20 in wide, 24 in tall, and a sill no more than 44 in above the floor.

Window wells, drains, and keeping the basement dry

A window well is the structure that holds back the soil around a below-grade egress window, and it must be at least 9 sq ft in area with a minimum dimension of 36 in in both directions to meet code. A prefabricated steel or composite well costs $200 to $600, installs in 2 to 4 hours, and is the best choice for most homes, because it is galvanized or coated to resist rust and it bolts to the foundation wall with a flange. A masonry well built from concrete block or poured concrete costs $800 to $2,000, lasts longer than a steel well, and looks better, but it needs a mason and a concrete footing, which adds a day to the job. A plastic well is the cheapest option at $100 to $300, but it cracks in cold weather and it is not strong enough for a deep well in heavy soil. Whatever well you choose, it must be securely attached to the foundation wall and sealed where it meets the wall, because a gap between the well and the wall lets water pour into the basement every time it rains.

The drain is the part of the job that gets skipped most often and causes the most problems. A window well that has no drain fills with water in a heavy storm, and that water presses against the window, seeps through the seals, and floods the basement. The best drain is a connection to the foundation drain tile, which runs around the base of the foundation and carries water to a sump pump or to daylight; tying the well drain into the drain tile costs $200 to $500 and is the most reliable option. If the foundation drain tile is not accessible, a separate drain to a dry well or a small sump costs $500 to $1,000. A gravel bed at the bottom of the well, 6 to 12 in deep, helps the water drain and keeps the well from silting up, and a clear polycarbonate well cover costs $50 to $150 and keeps leaves, rain, and snow out of the well while still letting light in. Check the well after every heavy rain for the first year: if water is standing in the well for more than 24 hours, the drain is blocked or undersized, and it needs to be cleared or enlarged before the next storm. A well cover is not a substitute for a drain, but it cuts the water load by 80 percent or more and it is the cheapest insurance on the whole job.

Installing an egress window: what the job involves

Installing an egress window is a 2 to 4 day job for a professional crew, and it starts with marking the opening on the inside and outside walls, cutting the opening with a concrete saw, and installing a steel lintel above the opening to carry the weight of the wall above the window. The crew then sets the window in the opening, levels and plumbs it, and seals it with a bead of polyurethane sealant and a flashing membrane that directs water away from the wall. The window well is excavated, set in place, bolted to the foundation, and backfilled with gravel, and the drain is tied into the foundation drain tile or a separate dry well. The inside is finished with a jamb extension, a sill, and trim, and the window is tested to make sure it opens fully and latches securely. A permit is required in almost every jurisdiction, because the job cuts a new opening in a foundation wall, and the permit costs $100 to $300 and includes an inspection of the opening, the lintel, and the well drain. Do not skip the permit: an unpermitted egress window will be flagged by a home inspector, and the buyer will demand a permit or a discount.

This is not a do-it-yourself job for most homeowners. Cutting a concrete foundation wall requires a diamond-blade concrete saw, a shoring system to support the wall above the opening, and the knowledge to size the lintel correctly — a lintel that is too small can crack the wall above the window, and a wall that is not shored properly during the cut can shift. Excavation is also a professional job when the well is more than 3 ft deep, because the trench can collapse and bury a worker. The parts of the job a homeowner can do are the finishing work: painting the well, installing the well cover, and finishing the inside trim and sill, which saves $200 to $500 in labor. Know when to call a professional: any cut into a foundation wall, any well deeper than 3 ft, any job that needs a permit, or any sign of water in the basement. A professional installation costs $1,000 to $3,000 for a standard job and $3,000 to $7,000 for a full job with a new well and drain, and it is money well spent when a bad cut means a cracked foundation wall and a $5,000 repair.

Egress windows, home value, and the basement bedroom trap

An egress window is the difference between a basement room and a basement bedroom, and that difference is worth $10,000 to $30,000 in sale price in most markets. A bedroom is defined by code, not by furniture: a room with a bed, a closet, and a door is still not a bedroom if it has no egress window, and a home inspector will flag it, an appraiser will not count it, and a buyer will either walk away or demand a discount. The most common trap is the finished basement that was done without a permit and without an egress window: the seller lists it as a 4-bedroom house, the inspector finds the basement bedroom has no legal egress, and the sale falls through or the price drops by $15,000 to $25,000. An egress window that costs $3,000 to $5,000 fixes the problem permanently, and it also brings natural light into the basement, which makes the space feel bigger, drier, and more livable. If you are finishing a basement, install the egress window first, before the framing and drywall go up, because it is much cheaper and easier to cut the opening when the walls are open.

The safety case is even stronger than the value case. A basement bedroom with only one exit — the stairs — is a trap in a fire, because smoke and heat rise up the stairwell and block the only way out. An egress window gives the person in the bedroom a second way out, and it gives firefighters a second way in. The U.S. Fire Administration reports that a working smoke alarm and a second exit are the two most important factors in surviving a house fire, and an egress window is the second exit for a basement bedroom. Test the window every 6 months: open it fully, climb through it, and make sure the latch works and the well is clear of leaves, snow, and debris. Teach everyone in the house, including children, how to open the egress window and climb out, and keep the well clear of anything that blocks the opening. A basement bedroom without an egress window is not just a code violation and a value problem — it is a safety problem, and the $3,000 to $5,000 it costs to fix is the cheapest life insurance in the whole house.

Frequently asked questions

Keep reading

Basement Finishing Guide: Layout, Moisture Control and Costs That Stay on Budget

How-To

A finished basement adds 600 to 1,000 sq ft of usable living space for $25,000 to $55,000, and the project succeeds or fails on moisture control — test and fix water first, then plan the layout around the stairs, the furnace and the plumbing.

Read the article