Article — Tips & Tricks · November 13, 2026 · 15 min read

Composite Decking vs Wood: Cost, Maintenance and Lifespan Compared

Composite decking costs $15 to $30 per sq ft installed against $12 to $22 for pressure-treated wood, but composite lasts 25 to 30 years with 2 hours of maintenance a year, while wood lasts 10 to 15 years and needs staining every 1 to 2 years.

Composite decking costs $15 to $30 per sq ft installed compared with $12 to $22 per sq ft for pressure-treated wood and $20 to $35 per sq ft for cedar, but composite lasts 25 to 30 years with almost no maintenance while wood lasts 10 to 15 years and needs staining and sealing every 1 to 2 years. Over 25 years, a 300 sq ft (27.9 sq m) composite deck costs about $9,000 to $12,000 all-in, and a pressure-treated wood deck costs about $10,000 to $14,000 once you add up the staining, sealing, and board replacements. Composite wins on lifetime cost and weekends saved. Wood wins on upfront price, natural look, and a cooler surface under bare feet. Price your deck with the Deck Calculator, compare the build price in the deck build cost guide, and read the deck building dos and donts and the deck staining and sealing guide before you choose a material.

Backyard deck showing composite deck boards beside natural wood deck boards

How much does composite decking cost compared with wood?

Composite decking costs $15 to $30 per sq ft installed, pressure-treated wood costs $12 to $22 per sq ft installed, and cedar costs $20 to $35 per sq ft installed. For a 300 sq ft (27.9 sq m) deck, that is $4,500 to $9,000 for composite, $3,600 to $6,600 for pressure-treated pine, and $6,000 to $10,500 for cedar. The material alone tells a different story: composite boards cost $4 to $9 per linear foot, pressure-treated boards cost $1.50 to $3 per linear foot, and cedar boards cost $3 to $7 per linear foot. Labor is roughly the same for both materials at $8 to $15 per sq ft, because the framing, footings, and railing cost the same either way. Composite boards are heavier — a 16 ft composite board weighs 40 to 60 lbs compared with 25 to 35 lbs for the same board in pine — so a composite deck takes a little longer to build and may need two workers to carry the long boards.

The gap narrows fast when you look past the first year. A wood deck needs staining and sealing every 1 to 2 years at $1.50 to $3 per sq ft, which is $450 to $900 per treatment for a 300 sq ft deck, or $5,000 to $10,000 over 25 years. A wood deck also needs board replacements: expect to replace 5 to 10 percent of the boards over its life at $150 to $400 per repair. A composite deck needs a wash with soap and water twice a year, which costs nothing but an hour of your time, and no staining, sealing, or sanding ever. Over 25 years, the total cost of a 300 sq ft composite deck is about $9,000 to $12,000, while a pressure-treated wood deck costs about $10,000 to $14,000 and a cedar deck costs about $12,000 to $16,000. Composite costs more on day one and less over the life of the deck. Wood costs less on day one and more over the life of the deck, and it costs you a weekend every year or two as well.

How long does composite decking last compared with wood?

Composite decking lasts 25 to 30 years, pressure-treated wood lasts 10 to 15 years, and cedar lasts 15 to 20 years with good maintenance. Most composite brands carry a 25-year or 30-year warranty against fading, staining, and structural failure, and some premium lines carry a 50-year warranty. A pressure-treated deck starts to check, crack, and warp after 5 to 7 years, and the first boards usually need replacing at year 8 to 10. A cedar deck holds up better because cedar is naturally resistant to rot and insects, but it still grays, cracks, and needs a new coat of stain every 1 to 2 years to keep its color. A wood deck that is never stained or sealed lasts 7 to 10 years before it looks rough and feels unsafe underfoot.

The framing underneath matters as much as the decking on top. A deck framed with pressure-treated lumber lasts 20 to 30 years, and a deck framed with steel lasts 40 years or more, so the frame usually outlives a wood deck surface and matches a composite surface. That is the real lifespan math: a composite deck is a one-time surface that lasts as long as its frame, while a wood deck is a surface you will replace once or twice during the life of the frame. If you plan to stay in the house for 15 years or more, composite is the better buy. If you plan to sell in 5 years, wood gives you a new deck for less money up front, and the buyer gets the look of a fresh deck either way.

How much maintenance does composite decking need?

Composite decking needs about 2 hours of maintenance per year: a wash with soap and water in the spring and another in the fall, and nothing else. Sweep off leaves and debris once a week during the fall, because wet leaves left on composite for weeks can leave a tannin stain that needs a scrub to remove. Wash with a mild dish soap and a soft-bristle brush, or a pressure washer on its lowest setting held at least 12 in from the surface — a pressure washer held too close can scar the cap layer on capped composite boards. Never use a metal shovel on composite in winter, because it scratches the surface; use a plastic shovel and calcium chloride ice melt, not rock salt, which can leave a white film. Grease from a grill wipes off composite with dish soap if you catch it the same day, but a grease stain left for a week can set, so keep a drip tray under the grill.

A wood deck needs 8 to 12 hours of maintenance per year plus a full weekend every 1 to 2 years. The annual routine is sweeping, washing with a deck cleaner, and checking for loose boards, popped nails, and soft spots where rot has started. Every 1 to 2 years the deck needs cleaning, sanding of rough spots, and a new coat of stain and sealer, which takes a full weekend for a 300 sq ft deck and costs $450 to $900 if you hire it out or $150 to $300 in materials if you do it yourself. A wood deck also needs the gaps between boards cleared of debris so water drains instead of pooling, and the ledger board — the board that attaches the deck to the house — inspected every year for rot, because a failed ledger is the most common cause of a deck collapse. The maintenance gap is the biggest lifestyle difference between the two materials: composite gives you back a weekend a year, and over 25 years that is 25 weekends.

Does composite decking get hot in the sun?

Yes, composite decking gets hotter than wood in direct sun: on a 90 degree Fahrenheit (32 degrees Celsius) day, a dark composite board in full sun reaches 130 to 150 degrees Fahrenheit (54 to 66 degrees Celsius), while a light-colored wood board reaches 110 to 125 degrees Fahrenheit (43 to 52 degrees Celsius). The difference is real and it matters for bare feet, kids, and dogs. Light-colored composite — gray, tan, or light brown — runs 10 to 20 degrees cooler than dark composite in the same sun, so color choice is the single biggest lever on surface temperature. Some brands now sell heat-reflective boards that run 10 to 15 degrees cooler than their standard boards in the same color, and they are worth the 10 to 20 percent price premium if your deck faces south or west and gets full afternoon sun.

There are practical ways to keep any deck comfortable. A pergola or a retractable awning cuts the surface temperature by 20 to 30 degrees by shading the boards during the hottest part of the day. An outdoor rug in the main traffic area protects bare feet and costs $100 to $300. A light-colored deck is the simplest fix: a light gray composite board is within 5 to 10 degrees of a natural wood board in the same sun, while a dark brown composite board is 20 to 30 degrees hotter. If your deck is in full sun all day and you walk on it barefoot every summer evening, wood or light composite is the better choice. If your deck is partly shaded, or you mostly wear shoes on it, the temperature difference is a minor issue and the low maintenance of composite matters more. Never choose a dark composite board for a south-facing deck without seeing a sample in full sun first — a sample left in the sun for an hour tells you more than any brochure.

What does composite decking look like next to real wood?

Modern composite decking looks close to real wood from 5 ft away, but it does not look identical up close, and the difference is in the grain. Premium composite boards have a molded wood grain with color variation from board to board, and the best lines use three or four color tones in the same board to mimic the variation in real lumber. Budget composite boards have a flat, uniform color with a repeating grain pattern that is easy to spot once you know what to look for. Real wood has grain that never repeats, knots, and a color that changes as it weathers — pressure-treated pine turns a silver-gray in 1 to 2 years if it is not stained, and cedar turns a soft silver-gray in 2 to 3 years, which many homeowners like and some do not.

The look question is really a taste question. Composite looks neat, uniform, and new for 25 years: the color fades 5 to 10 percent in the first year and then stays stable, and the boards stay straight and flat. Wood looks natural and warm, but it changes: boards cup, check, and gray, and a wood deck looks its best in its first 2 years and then needs regular staining to keep that look. A wood deck with a rich stain is the prettier deck in year one. A composite deck is the prettier deck in year ten, because it still looks the way it did on day one while the wood deck has weathered. Get samples of both and leave them outside for two weeks: the composite sample will look the same, the wood sample will already be changing, and that tells you which look you will be living with.

Is composite decking worth it for resale value?

Composite decking is worth it for resale if you plan to stay at least 5 years, because a deck returns 60 to 70 percent of its cost at sale and a composite deck still looks new when a wood deck of the same age looks tired. A 300 sq ft composite deck that costs $7,000 to $9,000 installed adds $4,500 to $6,500 to a home's sale price, and a wood deck that costs $5,000 to $6,600 installed adds $3,000 to $4,500. The gap is not in the dollar return — both return about two-thirds of their cost — it is in the buyer reaction: a buyer who sees a composite deck sees no work to do, while a buyer who sees a 10-year-old wood deck sees a staining weekend and a re-deck in 5 years, and that shows up in the offer.

Composite also wins on the inspection and the insurance side. A composite deck passes a home inspection cleanly for 25 years, while a wood deck starts drawing inspector comments about soft boards, loose railings, and rot at year 10 to 12, and those comments cost the seller money in repairs or credits. The case against composite is simple: if you are selling in 2 to 3 years, the extra $2,000 to $3,000 you spend on composite will not come back in the sale price, so wood is the better short-term buy. If you are staying, composite pays for itself in maintenance savings alone by year 8 to 10, and the resale benefit after that is a bonus.

Close-up of a composite deck board edge next to a weathered wood board
Composite decking costs $15 to $30 per sq ft installed against $12 to $22 for pressure-treated wood, but composite lasts 25 to 30 years with 2 hours of maintenance a year, while wood lasts 10 to 15 years and needs staining every 1 to 2 years.

Which composite decking brand should you buy?

The three brands worth comparing are Trex, TimberTech, and Fiberon, and the differences between them are smaller than the difference between their budget and premium lines. Trex Transcend is the best-known premium line at $6 to $9 per linear foot, with a 50-year warranty and the widest color range. TimberTech AZEK is the top of the market at $7 to $10 per linear foot, made from PVC rather than wood-plastic composite, which makes it lighter, cooler, and more resistant to stains and scratches. Fiberon Good Life is the best budget composite at $4 to $6 per linear foot, with a 25-year warranty and solid performance for the price. All three use hidden fasteners that cost $0.50 to $1 per sq ft and leave a clean surface with no visible screws. Buy the premium line if the deck is the centerpiece of your backyard and you will see it every day; buy the budget line if the deck is a simple platform and the money is better spent on the railing or the stairs.

Shop by warranty and by sample, not by brochure. A 25-year warranty is the minimum for a composite deck, and a 50-year warranty is worth a 10 to 15 percent premium if you plan to stay in the house. Check what the warranty excludes: most warranties do not cover fading beyond a set amount, do not cover damage from a grill or a fire pit, and are void if the boards are installed with the wrong gap spacing. Composite boards expand and contract with temperature, so they need a 1/8 in to 1/4 in gap at the ends and a 1/8 in gap between boards — a contractor who butts the boards tight is building a deck that will buckle in the summer. Ask the contractor how many composite decks they have built, because composite installs differently from wood: it needs more joists, closer spacing at 12 in on center for diagonal patterns, and special care with the hidden fasteners. A contractor who has built 50 wood decks and one composite deck is not the contractor for a composite job.

Common composite vs wood decking mistakes and how to avoid them

The most common mistake is choosing composite for the wrong reason — because it is advertised as maintenance-free, when it is actually low-maintenance. Composite still needs washing twice a year, and a composite deck under a tree that is never cleaned will stain from leaf tannins and look worse than a wood deck that is cleaned. The second mistake is buying the cheapest composite: budget boards fade faster, scratch more easily, and feel hollow underfoot, and the $1 to $2 per linear foot saved on day one costs you the look of the deck for 25 years. The third mistake is installing composite on 16 in joist spacing for a diagonal pattern, which sags — diagonal composite needs 12 in spacing, and the joists cost $200 to $400 more for a 300 sq ft deck. The fourth mistake is using wood-deck screws on composite, which mushroom the surface and void the warranty; use the hidden fasteners or screws the manufacturer specifies. The fifth mistake is picking a dark color for a sunny deck and then discovering it is too hot for bare feet — get a sample, leave it in the sun for an hour, and step on it before you order 300 sq ft of it.

Frequently asked questions

Keep reading

Deck Building Do's and Don'ts: 18 Rules From the Pros

Do's & Don'ts

A deck rarely fails at the surface first. Footings, ledger flashing, joist spacing, drainage and fastener choices decide whether it stays level and solid. Eighteen rules to follow — and the shortcuts to refuse.

Read the article

Deck Staining and Sealing: When to Restain, What It Costs, and How to Make It Last

How-To

Restain a wood deck every 2 to 3 years, or when water stops beading on the surface — a 300 sq ft deck costs $300 to $700 DIY or $700 to $1,500 professionally, and preparation is most of the job.

Read the article