Article — Tips & Tricks · November 12, 2026 · 15 min read

Bathroom Tile Buying Guide: Ceramic, Porcelain and Stone Compared

Porcelain is the best all-around bathroom tile at $3 to $10 per sq ft: it absorbs less than 0.5 percent water and needs no sealing, while ceramic costs $2 to $7 per sq ft and stone costs $8 to $25 per sq ft and needs sealing every 6 to 12 months.

Porcelain is the best bathroom tile for most homeowners: it costs $3 to $10 per sq ft for the tile, absorbs less than 0.5 percent water, resists stains and scratches, and works on floors, shower walls, and shower floors, while ceramic costs $2 to $7 per sq ft and suits walls and light-traffic floors, and natural stone costs $8 to $25 per sq ft and looks beautiful but needs sealing every 6 to 12 months. Budget $1,000 to $3,000 for tile and materials in a typical 40 sq ft bathroom, and $1,500 to $4,000 for professional installation. Size the job with the Tile Calculator, price the installation with the tile installation cost guide, and plan the pattern with the bathroom tile layout guide.

Bright bathroom with large-format porcelain floor tiles and a tiled shower wall in soft gray, with a freestanding tub and a glass shower screen

Ceramic vs porcelain vs natural stone: which tile is best for a bathroom?

Porcelain is the best all-around bathroom tile, because it is denser, harder, and far less absorbent than ceramic, and far more forgiving than natural stone. Porcelain absorbs less than 0.5 percent water, so it does not swell, stain, or crack in a wet bathroom, and its color runs through the body of the tile, so a chip is barely visible. Ceramic absorbs 3 to 7 percent water, which is fine for walls and a low-traffic powder room floor, but it is a weaker choice for a shower floor or a busy family bathroom. Natural stone — marble, travertine, slate, and granite — is the most beautiful option and the most demanding: it is porous, it stains from shampoo, soap, and hard water, it needs sealing every 6 to 12 months, and a single etched spot from a dropped bottle of cleaner can cost $200 to $400 to repair. Choose porcelain for floors and shower floors, ceramic for walls where you want a lower price and more color options, and stone only if you love the look and accept the maintenance.

The price gap between the three is real but smaller than most people expect once installation is included. Ceramic tile costs $2 to $7 per sq ft, porcelain costs $3 to $10 per sq ft, and natural stone costs $8 to $25 per sq ft, with marble at the top of that range and slate near the bottom. Installation costs $5 to $15 per sq ft for ceramic and porcelain and $10 to $25 per sq ft for stone, because stone is heavier, harder to cut, and needs a perfectly flat substrate. For a typical 40 sq ft bathroom floor, the tile alone costs $80 to $280 for ceramic, $120 to $400 for porcelain, and $320 to $1,000 for stone, while the full installed floor costs $300 to $900 for ceramic, $400 to $1,000 for porcelain, and $800 to $2,000 for stone. The cheapest way to get a high-end look is porcelain tile that mimics marble or wood: it costs $4 to $8 per sq ft, needs no sealing, and most visitors cannot tell it from the real thing. Never buy the cheapest tile you can find for a shower floor — a $1 per sq ft ceramic tile with 7 percent absorption will stain, crack, and need replacing within 3 to 5 years.

How much does bathroom tile cost in total?

A full bathroom tile job costs $1,000 to $5,000 for materials and $1,500 to $4,000 for professional installation in a typical 40 sq ft bathroom with a 32 sq ft shower. The tile itself is only part of the bill: expect $200 to $600 for thinset mortar and grout, $100 to $300 for a waterproofing membrane such as RedGard or a Schluter-Kerdi system, $150 to $400 for cement backer board, $50 to $150 for trim pieces and bullnose edging, and $100 to $250 for tools if you do it yourself. A shower retile alone costs $1,000 to $3,000 installed, a floor-only retile costs $500 to $1,500 installed, and a full floor-plus-shower retile costs $2,500 to $7,000 installed. The price climbs when you choose large-format tile that needs a perfectly flat floor, mosaic tile that takes longer to set, or a herringbone or diagonal pattern that adds 15 to 20 percent waste and 30 to 50 percent more labor time.

What tile size and format should you choose?

Large-format tile makes a small bathroom look bigger: 12 by 24 in tiles on the floor and 12 by 24 in or 24 by 48 in tiles on the walls are the most popular choice in 2026, because fewer grout lines mean a cleaner look and less grout to clean. A 12 by 24 in tile costs $4 to $9 per sq ft in porcelain and needs a floor that is flat to within 1/8 in over 10 ft, so the installer may need to level the subfloor first, which adds $100 to $300 to the job. Small-format tile suits shower floors and curved surfaces: 2 by 2 in mosaic tiles cost $5 to $12 per sq ft, grip bare feet better because of the extra grout lines, and bend around a sloped shower pan that large tile cannot follow. Subway tile at 3 by 6 in costs $2 to $6 per sq ft and is the safest wall choice, while 4 by 4 in and 6 by 6 in tiles cost $2 to $5 per sq ft and suit a traditional or cottage bathroom.

How do PEI ratings and slip resistance work?

Check the PEI rating before you buy floor tile: PEI 3 is the minimum for a bathroom floor, PEI 4 suits a busy family bathroom, and PEI 5 is commercial grade and overkill for a home. The PEI scale measures how well the tile glaze resists wear and abrasion, from PEI 1 for walls only to PEI 5 for heavy commercial traffic. A PEI 2 tile on a bathroom floor will show wear paths within 2 to 3 years, while a PEI 4 tile will look new for 15 to 20 years. Wall tile needs no PEI rating at all, because it is never walked on, so you can choose any ceramic or glass tile for the walls regardless of its hardness. Natural stone has no PEI rating, because the wear rating applies to glazed tile, but marble and travertine are softer than porcelain and will show scratches from sand and grit tracked in on shoes.

Slip resistance matters more than hardness in a wet bathroom: look for a coefficient of friction (COF) of 0.42 or higher for a bathroom floor, and 0.60 or higher for a shower floor, measured by the DCOF AcuTest. Matte and textured porcelain tiles usually test at 0.42 to 0.60, while polished porcelain and polished marble test at 0.20 to 0.30 and are dangerously slippery when wet — never use polished tile on a bathroom floor or a shower floor, no matter how good it looks in the showroom. Mosaic tile on a shower floor is naturally slip-resistant because every grout line adds grip, which is why most shower floors use 2 by 2 in mosaic even when the walls use large-format tile. If you love a polished look, use it on the walls only, and choose a matte version of the same tile for the floor. A $30 bottle of anti-slip treatment can raise the COF of an existing slippery floor, but it needs reapplying every 1 to 2 years and is no substitute for choosing the right tile in the first place.

Which tile goes where: floor, shower floor, and shower walls?

Use porcelain on the floor, mosaic porcelain on the shower floor, and ceramic or porcelain on the shower walls — that combination gives the best durability for the lowest maintenance. The bathroom floor takes the most abuse: water splashes, dropped bottles, and grit from shoes, so it needs porcelain with a PEI 4 rating and a COF of 0.42 or higher. The shower floor sits in standing water every day, so it needs porcelain mosaic with less than 0.5 percent absorption and a COF of 0.60 or higher, set on a sloped pan with a waterproof membrane underneath. The shower walls need water resistance and easy cleaning, so large-format porcelain or ceramic with a glazed surface is ideal, and glass tile makes a beautiful accent but costs $10 to $30 per sq ft and shows every water spot.

What grout, mortar, and backer board do you need?

Use a polymer-modified thinset mortar and a cement backer board behind every bathroom tile, because drywall and mastic fail in a wet bathroom. Thinset costs $15 to $30 per 50 lb bag, and one bag covers 75 to 100 sq ft at a 1/4 in notch, so a typical bathroom needs 2 to 3 bags. A polymer-modified thinset bonds to porcelain, which is too dense for standard thinset, and it resists the moisture that a bathroom floor sees every day. Mastic, the premixed adhesive in a bucket, costs $20 to $40 per gallon and is fine for a kitchen backsplash, but it never fully cures in a wet shower and will soften and release tiles within 1 to 2 years — never use mastic in a shower. Cement backer board costs $10 to $15 per 3 by 5 ft sheet, and it replaces drywall behind shower tile: drywall absorbs water, swells, and grows mold, while backer board is dimensionally stable when wet.

Choose sanded grout for joints wider than 1/8 in and unsanded grout for joints 1/8 in or narrower, and seal the grout after it cures for 48 to 72 hours. Sanded grout costs $15 to $25 per 25 lb bag and resists cracking in wide joints, while unsanded grout costs $15 to $25 per 25 lb bag and suits the 1/16 in joints of rectified tile. Epoxy grout costs $50 to $80 per unit, never needs sealing, resists stains and mold, and is the best choice for a shower floor, but it sets in 30 to 45 minutes and is harder for a first-timer to work with. Seal cement grout with a penetrating sealer at $20 to $40 per bottle, and reseal every 1 to 2 years in a shower and every 2 to 3 years on a floor. A waterproofing membrane goes under the tile in the shower: a liquid membrane such as RedGard costs $50 to $80 per gallon and covers 50 sq ft per coat, while a sheet membrane system costs $200 to $400 for a standard shower. The membrane is the part that keeps water out of your walls, so never skip it to save $100.

Close-up of hands holding ceramic, porcelain, and marble tile samples over a bathroom floor, comparing color and finish
Porcelain is the best all-around bathroom tile at $3 to $10 per sq ft: it absorbs less than 0.5 percent water, works on floors and shower floors, and needs no sealing, while ceramic suits walls and stone needs sealing every 6 to 12 months.

How do you buy the right amount of tile?

Measure the room, add 10 percent waste for a straight layout or 15 percent for a diagonal pattern, and order all the tile from one dye lot. Measure each wall and floor section in feet, multiply length by width to get the square footage, and add the sections together — a typical 5 by 8 ft bathroom has 40 sq ft of floor, and a 32 sq ft shower has about 80 sq ft of wall tile if the walls are 7 ft tall. The Tile Calculator does the math from your dimensions and the tile size, and tells you how many boxes to buy. Check the coverage printed on each box, because a box of 12 by 24 in tile usually covers 12 to 16 sq ft, while a box of 2 by 2 in mosaic covers 5 to 10 sq ft. Round up to the next whole box, and buy one extra box beyond the calculation for repairs — a discontinued tile is impossible to match later.

Should you install bathroom tile yourself or hire a pro?

Hire a professional for a shower and consider doing the floor yourself, because the shower is where a mistake costs the most. Professional installation costs $5 to $15 per sq ft for ceramic and porcelain floors, $10 to $25 per sq ft for stone, and $1,500 to $4,000 for a full bathroom, and a good installer finishes a floor in 1 to 2 days and a shower in 2 to 4 days. A do-it-yourself floor costs $100 to $250 in tools — a wet saw rental at $50 to $75 per day, a trowel, spacers, and a level — plus $200 to $600 in mortar, grout, and backer board, and takes a weekend for a first-timer. The shower is harder: the waterproofing membrane, the sloped pan, and the plumbing penetrations all need to be exactly right, and a leak behind shower tile can cause $2,000 to $10,000 of water damage before you notice it. If you do the shower yourself, follow the membrane manufacturer's instructions exactly, flood-test the pan for 24 hours before you tile, and do not skip the test to save a day.

Get three quotes before you hire, and check that each installer is licensed and insured in your state. Ask each installer how they waterproof the shower, what thinset they use, and whether the quote includes the membrane, the backer board, and the grout sealing — a quote that leaves out the membrane is $200 to $400 cheaper on paper and a leak waiting to happen. Check references from the last 6 months, and look at a finished shower in person if you can. A good installer will level the subfloor, use a laser level for the wall layout, and leave you the spare tiles and the grout color name. The most common installer mistake is skipping the waterproofing or using mastic in a shower, so ask the question directly and get the answer in writing. If an installer quotes a price far below the others, they are cutting a corner somewhere — usually the membrane, the backer board, or the grout sealing.

Common bathroom tile buying mistakes

The most common mistake is buying polished tile for the floor: it looks stunning in the showroom and becomes a skating rink the first time it gets wet, and the only fix is replacing it. The second mistake is buying too little tile: a 5 percent waste factor is not enough, and a second order from a different dye lot will show as a shade difference across the floor. The third mistake is choosing stone for a shower floor without understanding the maintenance: marble etches from shampoo, travertine needs filling, and both need sealing every 6 to 12 months, which most homeowners stop doing after the first year. The fourth mistake is skipping the waterproofing membrane to save $100 to $200 — the membrane is the only thing between your shower and your wall framing, and a leak costs $2,000 to $10,000 to repair.

The fifth mistake is using mastic instead of thinset in a shower, which softens in constant moisture and releases tiles within 1 to 2 years. The sixth mistake is grouting the joint between the wall and the floor instead of caulking it: the joint moves, the grout cracks, and water gets behind the tile. The seventh mistake is buying tile from two dye lots, which shows as a visible shade change across a wall. The eighth mistake is forgetting the trim pieces: a wall tile that ends without a bullnose edge looks unfinished, and ordering trim later costs a week of delay. Before you buy, check the PEI rating, the COF rating, the water absorption, the dye lot, and the trim availability, and take a sample home to check under your own lights — those five checks prevent almost every expensive tile regret.

Frequently asked questions

Keep reading

Bathroom Tile Layout: Patterns, Grout Lines and a Layout That Looks Professional

How-To

Center the pattern on the focal wall, dry-lay before mixing thinset, and keep every edge cut wider than half a tile — the layout decisions made before the first tile is set are what make a job look professional.

Read the article

Grout Cleaning and Sealing Guide: Restore Tile Grout Without Replacing It

How-To

Clean grout with an alkaline cleaner and a stiff brush first, oxygen bleach for stains that survive, and seal cement grout every 1 to 3 years.

Read the article